DRIVE?CLiQ signal cables

are used to connect components with DRIVE?CLiQ connections which have a separate or external 24 V DC power supply.

MOTION?CONNECT DRIVE?CLiQ signal cables

are used whenever components with DRIVE?CLiQ connections must meet high requirements such as mechanical stress and oil resistance, e.g. when connections are made outside the cabinet between

• Motor Modules and Sensor Modules
• Motor Modules and motors with DRIVE?CLiQ interface
• Motor Modules and direct measuring systems with DRIVE?CLiQ interface (incl. non-Siemens measuring systems)

MOTION?CONNECT DRIVE?CLiQ signal cables have 24 V DC cores.

MOTION-CONNECT pre-assembled signal cables

are used whenever motor encoders on motors without DRIVE?CLiQ interface are connected to Sensor Modules.

Note:

All 6FX.002-2C... signal cables are also available with crimped contacts and connector housing supplied as a separate accessory.

• Signal cables with motor-side connector housing supplied as a separate accessory. In this case, the 6th position of the Article No. must be changed from 0 to 4:
  6FX.042-2C...-....
• Signal cables with module-side connector housing supplied as a separate accessory. In this case, the 6th position of the Article No. must be changed from 0 to 1:
  6FX.012-2C...-....

Once the contacts have latched into the insulator, they can no longer be removed.