Motor Modules . Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Motor Modules

| | | | | |

Motor Modules

General technical specifications

Electrical specifications
DC link voltage (up to 2000 m above sea level)	510 ... 720 V DC (line supply voltage 380 ... 480 V 3 AC) or 675 ... 1035 V DC (line supply voltage 500 ... 690 V3 AC)
Efficiency	> 98.5 %
Output frequency ¹⁾
Control type Servo	0 … 650 Hz
Control type Vector	0 … 600 Hz
Control type V/f	0 … 600 Hz
Conformity	CE (EMC Directive No. 2004/108/EC and Low-Voltage Directive No. 2006/95/EC)
Approvals, according to	cULus (only for drive units connected to line voltages 380 ... 480 V 3 AC and 500 ... 600 V 3 AC)
Safety Integrated	Safety Integrity Level 2 (SIL2) acc. to IEC 61508, Performance Level d (PLd) acc. to EN ISO 13849-1 and Control Category 3 acc. to EN ISO 13849-1 (previously EN 954-1).

¹⁾ Please note:
- The correlation between the maximum output frequency, pulse frequency and current derating. Higher output frequencies for specific configurations are available on request.
- The correlation between the minimum output frequency and permissible output current (current derating).
Information is provided in the SINAMICS Low Voltage Engineering Manual.

Line voltage 380 … 480 V 3 AC DC link voltage 510 … 720 V DC		Motor Modules
		6SL3325-1TE32-1AA3	6SL3325-1TE32-6AA3	6SL3325-1TE33-1AA3	6SL3325-1TE35-0AA3
Type rating
For I_L (50 Hz 400 V) ¹⁾	kW	110	132	160	250
For I_H (50 Hz 400 V) ¹⁾	kW	90	110	132	200
For I_L (60 Hz 460 V) ²⁾	hp	150	200	250	400
For I_H (60 Hz 460 V) ²⁾	hp	150	200	200	350
Output current
Rated current I_N A	A	210	260	310	490
Base load current I_L³⁾	A	205	250	302	477
Base load current I_H⁴⁾	A	178	233	277	438
Maximum current I_max A	A	307	375	453	715
DC link current
Rated current I_N DC when supplied from
Basic Line Module	A	256	317	380	600
Active Line Module	A	230	287	340	538
Base load current I_L DC ³⁾ when supplied from
Basic Line Module	A	250	305	368	581
Active Line Module	A	225	274	331	522
Base load current I_H DC⁴⁾ when supplied from
Basic Line Module	A	227	284	338	534
Active Line Module	A	195	255	303	480
Current demand
24 V DC auxiliary power supply	A	1.4	1.4	1.5	1.5
DC link capacitance	?F	4800	5800	8400	9600
Pulse frequency ⁵⁾
Rated frequency	kHz	2	2	2	2
Pulse frequency, max.
Without current derating	kHz	2	2	2	2
With current derating	kHz	8	8	8	8
Power loss, at 50 Hz 400 V ⁶⁾
Dissipated to the coolant	kW	1.55	1.88	2.2	3.42
Dissipated to the ambient air	kW	0.06	0.07	0.09	0.14
Total	kW	1.61	1.95	2.29	3.56
Coolant flow rate ⁷⁾	l/min	9	9	12	12
Volume of liquid in the integrated heat exchanger	dm³	0.31	0.31	0.91	0.91
Pressure drop, typ. ⁸⁾ for volumetric flow	Pa	70000	70000	70000	70000
Heat exchanger material		Stainless steel	Stainless steel	Stainless steel	Stainless steel
Sound pressure level L_pA (1 m) at 50/60 Hz	dB	52	52	52	52
DC link connection DCP, DCN		2 ? hole for M12 Busbar	2 ? hole for M12 Busbar	2 ? hole for M12 Busbar	2 ? hole for M12 Busbar
Motor connection U2, V2, W2		Hole for M12	Hole for M12	Hole for M12	Hole for M12
Conductor cross-section, max. (IEC)	mm²	2 ? 95	2 ? 95	2 ? 240	2 ? 240
Cable length, max. ⁹⁾
Shielded	m	300	300	300	300
Unshielded	m	450	450	450	450
PE/GND connection		2 ? hole for M12	2 ? hole for M12	2 ? hole for M12	2 ? hole for M12
Conductor cross-section, max. (IEC)	mm²	2 ? 95	2 ? 95	2 ? 240	2 ? 240
Degree of protection		IP00	IP00	IP00	IP00
Dimensions
Width	mm	150	150	150	150
Height	mm	746	746	1172	1172
Depth	mm	545	545	545	545
Weight, approx.	kg	41	41	80	80
Frame size		FXL	FXL	GXL	GXL

¹⁾ Rated power of a typ. 6-pole standard induction motor based on I_L or I_H with 400 V 3 AC 50 Hz.

²⁾ Rated power of a typ. 6-pole standard induction motor based on I_L or I_H with 460 V 3 AC 60 Hz.

³⁾ The base load current I_L is the basis for a duty cycle of 110 % for 60 s or 150 % for 10 s with a duty cycle duration of 300 s.

⁴⁾ The base load current I_H is the basis for a duty cycle of 150 % for 60 s or 160 % for 10 s with a duty cycle duration of 300 s.

⁵⁾Additional notes regarding the correlation between the pulse frequency and maximum output current/output frequency is provided in the SINAMICS Low Voltage Engineering Manual.

⁶⁾ The specified power loss represents the maximum value at 100 % utilization. The value is lower under normal operating conditions.

⁷⁾ The value applies to water and a mixture of water and Antifrogen N mixture with 45 % Antifrogen N as coolant.

⁸⁾ The value is valid for water as coolant. Additional information and notes on other coolants is provided in the SINAMICS Low Voltage Engineering Manual.

⁹⁾ Sum of all motor cables. Longer cable lengths for specific configurations are available on request. For additional information, please refer to the SINAMICS Low Voltage Engineering Manual.

Line voltage 380 … 480 V 3 AC DC link voltage 510 … 720 V DC		Motor Modules
		6SL3325-1TE36-1AA3	6SL3325-1TE38-4AA3	6SL3325-1TE41-0AA3	6SL3325-1TE41-4AA3
Type rating
For I_L (50 Hz 400 V) ¹⁾	kW	315	450	560	800
For I_H (50 Hz 400 V) ¹⁾	kW	250	400	450	710
For I_L (60 Hz 460 V) ²⁾	hp	500	700	800	1000
For I_H (60 Hz 460 V) ²⁾	hp	350	600	700	1000
Output current
Rated current I_N A	A	605	840	985	1405
Base load current I_L³⁾	A	590	820	960	1370
Base load current I_H⁴⁾	A	460	700	860	1257
Maximum current I_max A	A	885	1230	1440	2055
DC link current
Rated current I_N DC when supplied from
Basic Line Module	A	738	1025	1202	1714
Active Line Module	A	664	922	1080	1544
Base load current I_L DC ³⁾ when supplied from
Basic Line Module	A	719	1000	1170	1670
Active Line Module	A	646	898	1051	1500
Base load current I_H DC⁴⁾ when supplied from
Basic Line Module	A	561	853	1048	1532
Active Line Module	A	504	767	942	1377
Current demand
24 V DC auxiliary power supply	A	1.6	1.6	1.46	1.46
DC link capacitance	?F	12600	17400	21000	29000
Pulse frequency ⁵⁾
Rated frequency	kHz	1.25	1.25	1.25	1.25
Pulse frequency, max.
Without current derating	kHz	1.25	1.25	1.25	1.25
With current derating	kHz	7.5	7.5	7.5	7.5
Power loss, at 50 Hz 400 V ⁶⁾
Dissipated to the coolant	kW	4.65	5.52	7.46	9.53
Dissipated to the ambient air	kW	0.16	0.23	0.48	0.62
Total	kW	4.81	5.75	7.94	10.15
Coolant flow rate ⁷⁾	l/min	16	16	27	27
Volume of liquid in the integrated heat exchanger	dm³	0.74	0.74	1.56	1.56
Pressure drop, typ. ⁸⁾ for volumetric flow	Pa	70000	70000	70000	70000
Heat exchanger material		Aluminum	Aluminum	Aluminum	Aluminum
Sound pressure level L_pA (1 m) at 50/60 Hz	dB	54	54	56	56
DC link connection DCP, DCN		2 ? hole for M12 Busbar	2 ? hole for M12 Busbar	2 ? hole for M12 Busbar	2 ? hole for M12 Busbar
Motor connection U2, V2, W2		2 ? hole for M12	2 ? hole for M12	2 ? hole for M12	2 ? hole for M12
Conductor cross-section, max. (IEC)	mm²	4 ? 185	4 ? 185	4 ? 240	4 ? 240
Cable length, max. ⁹⁾
Shielded	m	300	300	300	300
Unshielded	m	450	450	450	450
PE/GND connection		2 ? hole for M12	2 ? hole for M12	2 ? hole for M12	2 ? hole for M12
Conductor cross-section, max. (IEC)	mm²	4 ? 185	4 ? 185	Busbar	Busbar
Degree of protection		IP00	IP00	IP00	IP00
Dimensions
Width	mm	265	265	295	295
Height	mm	1002	1002	1516	1516
Depth	mm	545	545	545	545
Weight, approx.	kg	110	110	220	220
Frame size		HXL	HXL	JXL	JXL