TIM 4R-IE DNP3 . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на TIM 4R-IE DNP3

| | | | | | | | |

TIM 4R-IE DNP3

Order number		6NH7803-4BA00-0AA0
Product type designation		TIM 4R-IE DNP3
Transmission rate
Transfer rate
? for Industrial Ethernet		10 ... 100 Mbit/s
? acc. to RS 232		9 600 ... 115 200 bit/s
Interfaces
Number of interfaces acc. to Industrial Ethernet		2
Number of electrical connections
? for external data transmission acc. to RS 232		2
? for power supply		1
Type of electrical connection
? of Industrial Ethernet interface		RJ45 port
? at interface 1 for external data transmission		9 pin Sub-D-connector, RS232 switchable to RS485
? at interface 2 for external data transmission		9-pole D-sub connector, RS232 can be switched to RS485
? for power supply		2-pole plugable terminal block
design of the removable storage C-PLUG		Yes
Supply voltage, current consumption, power loss
Type of voltage of the supply voltage		DC
Supply voltage		24 V
Supply voltage		20.4 ... 28.8 V
Consumed current
? from backplane bus for DC at 24 V maximum		0.2 A
? from external supply voltage for DC at 24 V maximum		0.17 A
Active power loss		4.6 W
Product expansion optional Backup battery		Yes
Type of battery		Lithium AA / 3.6 V / 2.3 Ah
Backup current
? typical		100 µA
? maximum		160 µA
Permitted ambient conditions
Ambient temperature
? during operation		0 ... 60 °C
? during storage		-40 ... +70 °C
? during transport		-40 ... +70 °C
Relative humidity at 25 °C without condensation during operation maximum		95 %
Protection class IP		IP20
Design, dimensions and weight
Module format		Compact module S7-300 double width
Width		80 mm
Height		125 mm
Depth		120 mm
Net weight		0.4 kg
Product properties, functions, components general
Number of units
? Note		Number of TIMs per S7?300 / S7-400: 1
Cable length
? with RS 232 interface maximum		6 m
? with RS 485 interface maximum		30 m
Performance data S7 communication
Number of possible connections for S7 communication
? maximum		5
? with PG connections maximum		2
? with OP connections maximum		1
? Note		only via LAN
Service
? PG/OP communication		Yes
Performance data telecontrol
Suitability for use
? Node station		Yes
? substation		Yes
? TIM control center		Yes
Protocol is supported
? TCP/IP		Yes
? DNP3		Yes
? SINAUT ST1 protocol		No
? SINAUT ST7 protocol		No
? Modbus RTU		Yes
Product function data buffering if connection is aborted		Yes
? Note		200,000 data points with one master
Number of DNP3 masters
? for Ethernet maximum		8
? with RS 232 interface maximum		1
Number of Modbus RTU slaves maximum		1
Product functions management, configuration
Configuration software
? required		SINAUT ST7 ES
Storage location of TIM configuration data		On the CPU or TIM
Product functions Time
Product component Hardware real-time clock		Yes
Product property Hardware real-time clock w. battery backup		Yes
Accuracy of the hardware real-time clock per day maximum		4 s
time synchronization
? from NTP-server		Yes