Smart Line Modules in booksize format feature the following interfaces as standard:

• 1 power connection via screw-type terminals
• 1 connection for the 24 V DC electronics power supply via the 24 V terminal adapter included in the scope of supply
• 1 DC link connection via integrated DC link busbars
• 2 PE/protective conductor connections
• 2 digital outputs (only on 5 kW and 10 kW Smart Line Modules)
• 1 digital output (only on 5 kW and 10 kW Smart Line Modules)
• 3 DRIVE-CLiQ sockets (only on 16 kW und 36 kW Smart Line Modules)

The status of the Smart Line Modules is indicated via two multi-color LEDs.

The signal cable shield can be connected to the Line Module by means of a shield terminal, e.g. type KLBU 3-8 SC by Weidmuller.

The scope of supply of the Smart Line Modules includes:

• DRIVE-CLiQ cable for connection to the Control Unit when mounted on the immediate left for drive control (on 16 kW and 36 kW Smart Line Modules only)
• 2 blanking plugs for sealing unused DRIVE-CLiQ sockets (on 16 kW and 36 kW Smart Line Modules only)
• DRIVE?CLiQ cable (length depends on module width) to connect Smart Line Modules to adjacent Motor Module
• Jumper for connecting the 24 V DC busbar to the adjacent Motor Module
• 24 V terminal adapter (X24)
• Connector X21 for digital inputs/outputs
• Connector X22 for digital inputs/outputs (on 5 kW and 10 kW Smart Line Modules only)
• Connector X1 for line connection (on 5 kW and 10 kW Smart Line Modules only)
• 1 set of warning signs in 30 languages
• 1 heat conducting foil (for Smart Line Modules with cold plate cooling only)