6EP1311-1SH03

Type

6FE1021-3CM10-1AA0

6FE1021-3CM10-2AA0

6FE1021-3CM10-3AA0

Product brand name

SIPLUS ECC2000

Product description

CM-230 managed version

CM-230 standalone version

CM-230-C standalone version

General data

Charging current typical

A

16

Settable charging current

A

6 … 80

Product function Load management

yes

Product description

Activation and monitoring of the energy-related components in the loading station, use in the communication with the electric vehicle in accordance with IEC61851

Suitability for use

Simple / complex AC charging systems

Standard for electric vehicle charging mode

IEC / ISO 61851

Standard for safety

according to IEC 61010-1 / EN 61010-1 (2nd edition) or UL61010-1 (2nd edition)

IP degree of protection on the front

IP20

Degree of pollution

3, according to IEC/EN 61010-1

Type of the sensor

Humidity/temperature

--

Insulation voltage with pollution degree 3 Rated value

V

230

Supply voltage

Type of voltage of supply voltage

DC

Supply voltage

• at DC rated value

V

24

• with DC

V

18 … 28

Current consumption at rated value of supply voltage

mA

300

Communications

Product function Bus communication

yes

Type of data transmission to control system

Ethernet

Protocol supported

• Vehicle communication according to IEC 61851

yes

• Ethernet protocol

yes

• EIB/KNX protocol

--

Display

Number of LEDs

1

Display version

• for standard operation

green, flashing / permanently lit, waiting for EF / charging process active

• as status display of the inputs/outputs

--

orange, flashing (1 Hz / 5 Hz), device waiting for enable / preheat charging pole

• for error signal

red, flashing / abruptly flashing, error (see operating instructions)

Inputs/outputs

Number of interfaces according to IEC 61851

1

Number of digital inputs

8

Type of voltage of input voltages

DC

Input voltage

V

0 … 28

Number of digital outputs

9

8

Type of voltage of output voltages

DC

Output voltage

V

18 … 28

Output current at digital output with <1> signal Rated value

A

0,3

Property of output Short-circuit proof

yes

Product function Activation of cable grip

yes

• Note

24 V (solenoid)

Auxiliary circuit

Number of NO contacts for auxiliary contacts

8

Operating current of auxiliary contacts

• at 230 V with AC

A

0,75

• at 110 V with AC

A

0,75

• at 24 V with DC

A

1

Terminals

Contact assignment

• of socket 1 at PIN 1

L+24 V: 24 V DC connection (SELV)

• of socket 1 at PIN 2

M: 24 V DC connection (SELV)

Contact assignment

• of socket 2 at PIN 1

FE: Functional grounding (part of the vehicle interface, connection to connector according to IEC 61851)

• of socket 2 at PIN 2

PX: Proximity (part of the vehicle interface, connection to connector according to IEC 61851)

• of socket 2 at PIN 3

CP: Control pilot (part of the vehicle interface, connection to connector according to IEC 61851)

Contact assignment

• of socket 3 at PIN 1

1L: Root R1 ... R4

• of socket 3 at PIN 2

R1: Relay Output 1

R1 (P): Relay for enabling power outlet

• of socket 3 at PIN 3

R2: Relay Output 2

R2 (V): Fan relay

• of socket 3 at PIN 4

R3: Relay Output 3

R3 (H): Interlock relay

• of socket 3 at PIN 5

R4: Relay Output 4

R4 (S): Signaling relay

Contact assignment

• of socket 4 at PIN 1

2L: Root R5 ... R8

• of socket 4 at PIN 2

R5: Relay Output 5

R5 (HT): Heating relay

R5 (P): Relay Output 5

• of socket 4 at PIN 3

R6: Relay Output 6

• of socket 4 at PIN 4

R7: Relay Output 7

• of socket 4 at PIN 5

R8: Relay Output 8

Contact assignment

• of socket 5 at PIN 1

24 V: Infeed for 24 V outputs TR, O1 ... O8

24 V: Infeed for 24 V outputs O1 ... O8

• of socket 5 at PIN 2

TR: Trip, 24 V output

Not used

• of socket 5 at PIN 3

RX: Receive line (RS 232)

• of socket 5 at PIN 4

TX: Transmit line (RS 232)

• of socket 5 at PIN 5

1M: 24 V DC minus (SELV/PELV)

• of socket 5 at PIN 6

24 V: 24 V DC plus (SELV/PELV) connection

Contact assignment

• of socket 6 at PIN 1

O1: 24 V switching output 1

O1 (RC): 24 V switching output status charging output (Ready to Charge)

• of socket 6 at PIN 2

O2: 24 V switching output 2

O2 (E): 24 V switching output Error status

• of socket 6 at PIN 3

O3: 24 V switching output 3

O3 (CS): 24 V switching output Cable connected status

• of socket 6 at PIN 4

O4: 24 V switching output 4

O4 (V): 24 V switching output Vehicle connected status

• of socket 6 at PIN 5

O5: 24 V switching output 5

O5 (VC): 24 V switching output Charging status (Vehicle Charging)

• of socket 6 at PIN 6

O6: 24 V switching output 6

• of socket 6 at PIN 7

O7: 24 V switching output 7

• of socket 6 at PIN 8

O8: 24 V switching output 8

• of socket 6 at PIN 9

3M: Reference point 24 V outputs O1 ... O8

Contact assignment

• of socket 7 at PIN 1

I1: 24 V input 1

• of socket 7 at PIN 2

I2: 24 V input 2

I2 (HL): 24 V input status circuit breaker

• of socket 7 at PIN 3

I3: 24 V input 3

I3 (LS): 24 V input status circuit breaker

• of socket 7 at PIN 4

I4: 24 V input 4

I3 (FI): 24 V input RCCB status

• of socket 7 at PIN 5

I5: 24 V input 5

I4 (EO): 24 V input emergency unlocking

• of socket 7 at PIN 6

I6: 24 V input 6

• of socket 7 at PIN 7

I7: 24 V input 7

• of socket 7 at PIN 8

I8: 24 V input 8

• of socket 7 at PIN 9

2M: Reference point 24 V inputs I1 ... I8

Contact assignment

• of socket 8 at PIN 1

RJ45: Ethernet 10/100

Environmental conditions

Installation altitude at height above sea level maximum

m

2 000

Ambient temperature

• During storage

°C

-25 … +70

• During operation

°C

-25 … +55

• During transport

°C

-25 … +70

Relative humidity

• during operation

%

0 … 95

Electromagnetic compatibility

EMC interference emission according to IEC 61000-6-3

suitable for use in residential areas, public areas and industry

EMC immunity according to IEC 61000-6-2

suitable for operation in industrial and residential areas

Conducted interference BURST according to IEC 61000-4-4

2 kV / 5 kHz DC supply lines, 1 kV / 5 kHz control lines, relay outputs, RS 232 and Ethernet, evaluation criterion B

Conducted interference SURGE according to IEC 61000-4-5

Asymmetrical: DC supply lines 0.5 kV / 12 ohm; control lines, functional grounding, RS 232 interface 1 kV / 42 ohm; relay outputs 2 kV / 12 ohm; Ethernet line (shield) 1 kV direct; evaluation criterion B. Symmetrical: DC supply lines 0.5 kV / 2 ohm; evaluation criterion B

Field-based interference according to IEC 61000-4-3

80 MHz ... 1 GHz 10 V/m, modulation 80% AM with 1 kHz, evaluation criterion B; 80 MHz ... 1.0 GHz 3 V/m, 1.4 ... 2.0 GHz 3 V/m, 2.0 ... 2.7 GHz 1 V/m, modulation 80% AM with 1 kHz, evaluation criterion A

Electrostatic discharging according to IEC 61000-4-2

4 kV contact discharging / 8 kV air discharging, evaluation criterion B

Shock resistance

• According to IEC 60068-2-27

15 g / 11 ms / 3 shocks / axis

• During transport according to IEC 60068-2-29

1000 shocks / axis, 25 g, 6 ms half sine

Vibration resistance

• During transport

5 ... 8.4 Hz / 3.5 mm deflection, 8.4 ... 500 Hz / 1 g

• During operation

5 ... 8.4 Hz / 3.5 mm deflection, 8.4 ... 150 Hz / 1 g

Conducted interference as high frequency radiation according to IEC 61000-4-6

3 V effective in frequency range 0.15 to 80 MHz, modulation 80 % AM with 1 kHz, evaluation criterion A

Immunity to magnetic fields with energy frequencies in accordance with EN 61000-4-8

100 A/m at 50 Hz and 60 Hz, evaluation criterion A

Active power loss total typical

W

4

Protection against electric shock

Finger-safe

Contact reliability

80 000 operating cycles at 1 A, inductive load

Mounting/fastening/dimensions

Installation position

Vertical, on horizontal standard mounting rail

Material of housing

Wellamid 6600-PA66-GV 30 HWV0CP

Lexan 915R

Type of mounting

Snap-on mounting on standard mounting rail TH 35 according to IEC 60715

Dimensions

• Width

mm

108

• Height

mm

91

• Depth

mm

72

Connections

Electrical connection version

• of inputs and outputs

Combicon connection GMSTB 2.5

• for auxiliary and control circuit

Combicon connection MSTB 2.5

Type of pin assignment

• of outputs

Combicon connection MSTB 2.5

• of inputs

Combicon connection MSTB 2.5

Product function Removable terminal for auxiliary and control circuit

yes

Connectable conductor cross section

• Solid

mm?

0,5 … 2,5

• Finely stranded

• Without core ends prepared

mm?

0,5 … 2,5

• With core ends prepared

mm?

0,5 … 2,5

AWG number

• As coded connectable conductor cross section

20 … 14