Modular technology
The components of modular technology can be ordered as accessories. The brake, as a safety-related module, must not be retrofitted.
Cables for rotary pulse encoders can be ordered from Catalog DA 65.10.
|
Mounting of rotary pulse encoder and separately driven fan for 1LA5, 1LA6, 1LA7 and 1LG motors |
Weight |
||||
|---|---|---|---|---|---|
|
Version |
Frame size |
Number of poles |
Order No. |
kg |
|
|
Rotary pulse encoder 1) |
HTL version |
100 ... 225 |
All |
1XP8 001-1 |
0.3 |
|
TTL version |
100 ... 225 |
All |
1XP8 001-2 |
0.3 |
|
|
Separately driven fan
|
100 |
All |
2CW2180-8RF54-1AB0 |
3.9 |
|
|
112 |
All |
2CW2210-8RF54-1AB1 |
4.4 |
||
|
132 |
All |
2CW2250-8RF54-1AB2 |
6.7 |
||
|
160 |
All |
2CW2300-8RF54-1AB3 |
7.2 |
||
|
180 |
All |
2CW2300-8RF54-1AB4 |
9.8 |
||
|
200 |
All |
2CW2300-8RF54-1AB5 |
10.7 |
||
|
225 3) |
All |
2CW2300-8RF54-1AB6 |
10.7 |
||
|
250 |
All |
1PP9063-2LA12-ZA11+K50 4) |
On request |
||
|
280 |
All |
1PP9063-2LA12-ZA11+K50 4) |
On request |
||
|
315 |
2 |
1PP9070-2LA12-ZA11+K50 4) |
On request |
||
|
315 |
4 to 8 |
1PP9063-2LA12-ZA11+K50 4) |
On request |
||
|
Separately driven fan and rotary pulse encoder 1XP8001-1 |
100 |
All |
2CW2180-8RF54-2AB0 |
4.2 |
|
|
112 |
All |
2CW2210-8RF54-2AB1 |
4.7 |
||
|
132 |
All |
2CW2250-8RF54-2AB2 |
6.0 |
||
|
160 |
All |
2CW2300-8RF54-2AB3 |
7.5 |
||
|
180 |
All |
2CW2300-8RF54-2AB4 |
10.1 |
||
|
200 |
All |
2CW2300-8RF54-2AB5 |
11.0 |
||
|
225 3) |
All |
2CW2300-8RF54-2AB6 |
11.0 |
||
1) For motor series 1LG, the rotary pulse encoders are available on request. They are only available for motor series 1LA7 as accessories for spare parts.
2) The separately driven fan 2CW2 ... comprises a complete fan unit with impeller, the separately driven fan 1PP9 ... only comprises the fan motor without mounting components and impeller.
3) For 1LG motors with separately driven fan with Order No. 1PP9 063-2LA12-Z A11+K50 (weight 4.37 kg).
4) Only for replacement purposes.
Encoder mounting
In the case of mounting by the customer.
Options H79, H80
Baumer Hübner GmbH
Postfach 126943
10609 Berlin, Germany
Tel. +49 (0) 30-690 03-0
Fax +49 (0) 30-690 03-104
http://www.baumerhuebner.com
E-mail: info@baumerhuebner.com
Option H78
Leine & Linde (Deutschland) GmbH
Bahnhofstraße 36
73430 Aalen, Germany
Tel. +49 (0) 7361-78 093-0
Fax +49 (0) 7361-78 093-11
http://www.leinelinde.com
E-mail: info@leinelinde.se
Slide rails with fixing bolts and tensioning screws according to DIN 42923
Slide rails are used to tension the belt of a machine easily and conveniently when a belt tightener is not available. They are fixed to the base using stone bolts or foundation blocks.
The assignment of slide rails to motor size can be found in DIN 42923. For motors of frame sizes 355 to 450, there are no standardized slide rails (please inquire).
Source of supply:
Lütgert & Co. GmbH
Postfach 42 51
33276 Gütersloh, Germany
Tel. +49 (0)5241-74 07-0
Fax +49 (0)5241-74 07-90
http://www.luetgert-antriebe.de
E-mail: info@luetgert-antriebe.de
Foundation block according to DIN 799
The foundation blocks are inserted into the stone foundation and embedded in concrete. They are used for fixing machines of medium size, slide rails, pedestal bearings, baseframes, etc. After the fixing bolts have been unscrewed, the machine can be dragged without it having to be lifted.
When the machine is initially installed, the foundation block that is bolted to the machine (without washers) and fitted with tapered pins is not embedded with concrete until the machine has been fully aligned. The machine is set 2 to 3 mm deeper in this case. The difference in shaft height is compensated by inserting shims on final installation. The tapered pins safeguard the exact position of the machine when it is repeatedly removed and replaced without the need for realignment.
Source of supply:
Lütgert & Co. GmbH
Postfach 42 51
33276 Gütersloh, Germany
Tel. +49 (0)5241-74 07-0
Fax +49 (0)5241-74 07-90
http://www.luetgert-antriebe.de
E-mail: info@luetgert-antriebe.de
Taper pins to DIN 258 with threaded ends and constant taper lengths
Taper pins are used for components that are repeatedly removed. The drilled hole is ground conical using a conical reamer until the pin can be pushed in by hand until the cone shoulder lies approx. 3 to 4 mm above the rim of the hole.
It can then be driven in using a hammer until it is correctly seated. The pin is removed from the drilled hole by screwing on the nut and tightening it.
Standardized taper pins are available from general engineering suppliers.
Source of supply, for example:
Otto Roth GmbH & Co. KG
Rutesheimer Straße 22
70499 Stuttgart, Germany
Tel. +49 (0)711-13 88-0
Fax. +49 (0)711-13 88-233
http://www.ottoroth.de
E-mail: info@ottoroth.de
Couplings
The motor from Siemens is connected to the machine or gear unit through a coupling. Siemens is an important coupling manufacturer with a wide range of products.
For standard applications, Siemens recommends that elastic couplings of types N-EUPEX and RUPEX or torsionally rigid couplings of types ARPEX and ZAPEX are used. For special applications, FLUDEX and ELPEX-S couplings are recommended.
Source of supply:
Siemens contact partner - ordering from Catalog Siemens MD 10.1 "FLENDER Standard Couplings"
or
SIEMENS AG
Kupplungswerk Mussum
Industriepark Bocholt
Schlavenhorst 100
46395 Bocholt, Germany
Tel. +49 (0)2871-92 21 85
Fax +49 (0)2871-92 25 79
http://www.siemens.com
E-mail: flendercouplings@siemens.com