Siemens
СРЕДСТВА ПРОМЫШЛЕННОЙ АВТОМАТИЗАЦИИ
официальный партнер Сименс
Каталог СА01 2013
архивный
(4872) 700-366
skenergo@mail.ru
Двигатели только для работы от преобразователя
Converter-fed operation up to 500 V +10 % line voltage

The standard insulation of the 1LA and 1LG motors is designed such that operation on the converter is possible at line voltages up to 500 V +10 % in motorized operation (for motor series 1LA8, up to 500 V +10 % generally). This also applies for operation with a pulse-controlled AC converter with voltage rise times of ts > 0.1 μs at the motor terminals (IGBT transistors). At higher voltages, the motors require increased insulation resistance. Please inquire in the case of converter-fed operation with motors with protruding connection cables (order codes L44, L45, L47, L48, L49, L51 and L52).

The 1LA8 non-standard motors of the types specially identified for converter-fed operation (the 9th and 10th position of the Order No. is filled with "PB", "PC" or "PE") have an insulated motor bearing as standard at the non-drive end NDE. The motors are equipped with standard insulation and standard rotors and are suitable for mains-fed and converter-fed operation. For further information, see "SIMOTICS N-compact Non-Standard Motors".

Converter-fed operation up to 690 V +10 % line voltage

1LA5, 1LA7 and 1LG6 standard motors as well as 1LA8 and 1PQ8 non-standard motors are also available with a higher insulation resistance of the winding system for operation on the converter with supply voltages from 500 to 690 V (+10 %), and do not usually require a filter. These motors are identified by an "M" in the 10th digit of the Order No. (e.g. 1LA83152PM).

With the reinforced insulating system, there is less space in the grooves in motor series 1LA8 and 1PQ8 for the same number of windings compared to the normal version, which slightly reduces the rated output of these motors. For further information, see Part 3 of this catalog "SIMOTICS N-compact Non-Standard Motors".

Note:
The configuration tool SIZER for Siemens Drives is available for configuring converter-fed motors.

Category

Motors for converter-fed operation only

Series version

Cast-iron series 1LG6
with special insulation up to 690 V

Cooling

Self-ventilated (IC 411)

Degree of protection

IP55, optionally IP56 or IP65

Insulation

Thermal class 155 (F)

Utilization

Thermal class 130 (B)

Number of poles

2, 4, 6, 8

Frame sizes (FS)

180 M ... 315 L

Rated output at 50 Hz

11 ... 200 kW

Synchronous speed

750 ... 3600 rpm

Rated torque at 50 Hz

71 ... 1704 Nm

Efficiency

High Efficiency

Range of motors with Order No. for type of construction IM B3

 

Prated, 
50 Hz

IE
class

Frame size

Order No.

kW

 

FS

 

2‑pole: 3000 rpm at 50 Hz

22

180 M

1LG6183‑2PM..

30

200 L

1LG6206‑2PM..

37

200 L

1LG6207‑2PM..

45

225 M

1LG6223‑2PM..

55

250 M

1LG6253‑2PM..

75

280 S

1LG6280‑2PM..

90

280 M

1LG6283‑2PM..

110

315 S

1LG6310‑2PM..

132

315 M

1LG6313‑2PM..

160

315 L

1LG6316‑2PM..

200

315 L

1LG6317‑2PM..

4‑pole: 1500 rpm at 50 Hz

18.5

180 M

1LG6183‑4PM..

22

180 L

1LG6186‑4PM..

30

200 L

1LG6207‑4PM..

37

225 S

1LG6220‑4PM..

45

225 M

1LG6223‑4PM..

55

250 M

1LG6253‑4PM..

75

280 S

1LG6280‑4PM..

90

280 M

1LG6283‑4PM..

110

315 S

1LG6310‑4PM..

132

315 M

1LG6313‑4PM..

160

315 L

1LG6316‑4PM..

200

315 L

1LG6317‑4PM..

6‑pole: 1000 rpm at 50 Hz

15

180 L

1LG6186‑6PM..

18.5

200 L

1LG6206‑6PM..

22

200 L

1LG6207‑6PM..

30

225 M

1LG6223‑6PM..

37

250 M

1LG6253‑6PM..

45

280 S

1LG6280‑6PM..

55

280 M

1LG6283‑6PM..

75

315 S

1LG6310‑6PM..

90

315 M

1LG6313‑6PM..

110

315 L

1LG6316‑6PM..

132

315 L

1LG6317‑6PM..

160

315 L

1LG6318‑6PM..

8‑pole: 750 rpm at 50 Hz

11

180 L

1LG6186‑8PM..

15

200 L

1LG6207‑8PM..

18.5

225 S

1LG6220‑8PM..

22

225 M

1LG6223‑8PM..

30

250 M

1LG6253‑8PM..

37

280 S

1LG6280‑8PM..

45

280 M

1LG6283‑8PM..

55

315 S

1LG6310‑8PM..

75

315 M

1LG6313‑8PM..

90

315 L

1LG6316‑8PM..

110

315 L

1LG6317‑8PM..

132

315 L

1LG6318‑8PM..
























































Каталог оборудования 2013
Каталог продуктов Siemens Industry Приводная техника Преобразователи Двигатели переменного тока Низковольтные электродвигатели (стандартные промышленные двигатели) Введение Стандартные электродвигатели IEC Нестандартные электродвигатели, размера 315 и выше Ex электродвигатели Двигатели для определенных секторов промышленности Приложения IEC двигатели Рекомендованные и экспресс двигатели SIMOTICS GP двигатели общего назначения SIMOTICS SD Двигатели для тяжелых условий работы SIMOTICS SD Стандартные двигатели 1LE1 SIMOTICS SD 1LA/1LG/1LP/1PP Стандартные двигатели Двигатели с классом эффективности IE2 Двигатели с классом эффективности IE3 Двигатели с классом эффективности IE1 Двигатели класса эффективности NEMA Energy Efficient MG1, Table 12-11 Двигатели класса эффективности NEMA Premium Efficient MG1, Таблица 12-12 Многоскоростные двигатели Двигатели только для работы от преобразователя Двигатели в чугунном корпусе, серия 1LG6 со специальной изоляцией - Самовентилируемые Дополнительный код заказа и специальные исполнения Размеры SIMOTICS DP Двигатели специального применения Нестандартные двигатели SIMOTICS XP Взрывозащищенные двигатели Серводвигатели и двигатели главного движения Прямые двигатели Высоковольтные двигатели Двигатели постоянного тока Системы измерения Мотор-редукторы Инструментальное программное обеспечение Дополнительные компоненты Технологии приводов для экстремальных условий Техника автоматизации Автоматизация зданий Низковольтная коммутационная техника Технология безопасности Системные решения и продукты для отраслей Сервис ... и все, что Вам еще необходимо

  © ООО "СК ЭНЕРГО" 2007-2022
  (4872) 700-366  skenergo@mail.ru
Яндекс.Метрика