Overall dimensions
|
Frame size |
Type |
Dimension |
|
|
|
|
|---|---|---|---|---|---|---|
|
100 L |
1LE15.., 1LE16.. |
388.5 |
193 |
100 |
196 |
2 x M32 x 1.5 |
|
1LE1523, 1LE1623 |
425 |
193 |
100 |
196 |
2 x M32 x 1.5 |
|
|
112 M |
1LE15.., 1LE16.. |
382 |
195 |
112 |
226 |
2 x M32 x 1.5 |
|
1LE1523, 1LE1623 |
408.5 |
195 |
112 |
226 |
2 x M32 x 1.5 |
|
|
132 S/ |
1LE15.., 1LE16.. |
456.5 |
214.5 |
132 |
256 |
2 x M32 x 1.5 |
|
1LE1523-, LE1623- |
||||||
|
1CA0, 1CC0, 1CC2 |
458 |
214.5 |
132 |
256 |
2 x M32 x 1.5 |
|
|
1CA1, 1CB0, 1CB2, 1CC3 |
508 |
214.5 |
132 |
256 |
2 x M32 x 1.5 |
|
|
160 M/ |
1LE15.., 1LE16.. |
594 |
261 |
160 |
300 |
2 x M40 x 1.5 |
|
160 M |
1LE1523, 1LE1623 |
596 |
261 |
160 |
300 |
2 x M40 x 1.5 |
|
160 L |
1LE1523, 1LE1623 |
656 |
261 |
160 |
300 |
2 x M40 x 1.5 |
|
180 M |
1LE15.1-, 1LE16.1- |
|||||
|
1EA2, 1EB2 |
668 |
286 |
180 |
339 |
2 x M40 x 1.5 |
|
|
1EA6 |
698 |
|||||
|
1LE15.3-, 1LE16.3- |
||||||
|
1EB2 |
668 |
286 |
180 |
339 |
2 x M40 x 1.5 |
|
|
1EA2 |
698 |
|||||
|
180 L |
1LE15.1-, 1LE16.1- |
|||||
|
1EB4, 1EC4, 1EC6 |
668 |
286 |
180 |
339 |
2 x M40 x 1.5 |
|
|
1EB6 |
698 |
|||||
|
1LE15.3-, 1LE16.3- |
||||||
|
1EC4 |
668 |
286 |
180 |
339 |
2 x M40 x 1.5 |
|
|
1EB4 |
698 |
|||||
|
200 L |
1LE15.1-, 1LE16.1- |
|||||
|
2AA4, 2AA5, 2AB5, 2AC4, 2AC5 |
721 |
315 |
200 |
378 |
2 x M50 x 1.5 |
|
|
2AA6 |
746 |
|||||
|
1LE15.3-, 1LE16.3- |
||||||
|
2AA4, 2AC4 |
721 |
315 |
200 |
378 |
2 x M50 x 1.5 |
|
|
2AA5, 2AB5, 2AC5 |
746 |
|||||
|
225 S |
1LE15.1-, 1LE16.1- |
|||||
|
2BB0 |
788 |
338 |
225 |
436 |
2 x M50 x 1.5 |
|
|
1LE15.3-, 1LE16.3- |
||||||
|
2BB0 |
788 |
338 |
225 |
436 |
2 x M50 x 1.5 |
|
|
225 M |
1LE15.1-, 1LE16.1- |
|||||
|
2BA2, 2BA6 |
818 |
338 |
225 |
436 |
2 x M50 x 1.5 |
|
|
2BB2, 2BB6, 2BC2, 2BC6 |
848 |
|||||
|
1LE15.3-, 1LE16.3- |
||||||
|
2BA2 |
818 |
338 |
225 |
436 |
2 x M50 x 1.5 |
|
|
2BB2, 2BC2 |
848 |
|||||
|
250 M |
1LE15.1-, 1LE16.1- |
|||||
|
2CA2, 2CA6, 2CB2, 2CB6, 2CC2, 2CC6 |
887 |
410 |
250 |
490 |
2 x M63 x 1.5 |
|
|
1LE15.3-, 1LE16.3- |
||||||
|
2CA2, 2CB2, 2CC2 |
887 |
410 |
250 |
490 |
2 x M63 x 1.5 |
|
|
280 S |
1LE15.1-, 1LE16.1- |
|||||
|
2DA0, 2DB0, 2DC0 |
960 |
433 |
280 |
540 |
2 x M63 x 1.5 |
|
|
1LE15.3-, 1LE16.3- |
||||||
|
2DA0, 2DB0, 2DC0 |
960 |
433 |
280 |
540 |
2 x M63 x 1.5 |
|
|
280 M |
1LE15.1-, 1LE16.1- |
|||||
|
2DA2, 2DB2, 2DC2, 2DC6 |
960 |
433 |
280 |
540 |
2 x M63 x 1.5 |
|
|
2DA6, 2DB6 |
1070 |
|||||
|
1LE15.3-, 1LE16.3- |
||||||
|
2DC2 |
960 |
433 |
280 |
540 |
2 x M63 x 1.5 |
|
|
2DA2, 2DB2 |
1070 |
|||||
|
315 S |
1LE15.1-, 1LE16.1- |
|||||
|
3AA0 |
1052 |
515 |
315 |
610 |
2 x M63 x 1.5 |
|
|
3AB0, 3AC0 |
1082 |
|||||
|
1LE15.3-, 1LE16.3- |
||||||
|
3AA0 |
1052 |
515 |
315 |
610 |
2 x M63 x 1.5 |
|
|
3AB0, 3AC0 |
1082 |
|||||
|
315 M |
1LE15.1-, 1LE16.1- |
|||||
|
3AC2 |
1082 |
515 |
315 |
610 |
2 x M63 x 1.5 |
|
|
3AA2 |
1217 |
|||||
|
3AB2 |
1247 |
|||||
|
1LE15.3-, 1LE16.3- |
||||||
|
3AA2 |
1217 |
515 |
315 |
610 |
2 x M63 x 1.5 |
|
|
3AB2, 3AC2 |
1247 |
|||||
|
315 L |
1LE15.1-, 1LE16.1- |
|||||
|
3AA4 |
1217 |
515 |
315 |
610 |
2 x M63 x 1.5 |
|
|
3AB4, 3AC4, 3AC5 |
1247 |
|||||
|
3AA5, 3AA6 |
1372 |
|||||
|
3AB5, 3AB6, 3AC6 |
1402 |
|||||
|
1LE15.3-, 1LE16.3- |
||||||
|
3AA4 |
1217 |
515 |
315 |
610 |
2 x M63 x 1.5 |
|
|
3AB4, 3AC4 |
1247 |
515 |
315 |
610 |
2 x M63 x 1.5 |
|
|
3AA5 |
1372 |
|||||
|
3AB5, 3AC5, 3AC6 |
1402 |
Notes on the dimensions
- Dimension designations according to DIN EN 50347 and IEC 60072.
- Fits
The shaft extensions specified in the dimension tables (DIN 748) and centering spigot diameters (DIN EN 50347) are machined with the following fits:
|
Dimension designation |
ISO fit DIN ISO 286-2 |
|
|---|---|---|
|
D, DA |
to 30 |
j6 |
|
N |
to 250 |
j6 |
|
F, FA |
h9 |
|
|
K |
H17 |
|
|
S |
flange (FF) |
H17 |
The drilled holes of couplings and belt pulleys should have an ISO fit of at least H7.
- Dimension tolerances
For the following dimension designations, the admissible deviations are given below:
|
Dimension designation |
Dimension |
Admissible deviation |
|---|---|---|
|
H |
to 250 |
–0.5 |
|
E, EA |
–0.5 |
Keyways and feather keyways (dimensions GA, GC, F and FA) are made in compliance with DIN 6885 Part 1.
- All dimensions are specified in mm.
Dimension sheet generator
(part of the DT Configurator)
A dimension drawing can be created in the DT Configurator for every configurable motor. A dimension drawing can be requested for every other motor.
When a complete Order No. is entered with or without order codes, a dimension drawing can be called up under the "Documentation" tab.
These dimension drawings can be presented in different views and sections and printed.
The corresponding dimension sheets can be exported, saved and processed further in DXF format (interchange/import format for CAD systems) or as bitmap graphics.
Online access in the Siemens Industry Mall
The DT Configurator is integrated into the Siemens Industry Mall and can be used on the Internet without installation.
German: http://www.siemens.de/dt-konfigurator
English: http://www.siemens.com/dt-configurator
Offline access in the Interactive Catalog CA 01
The DT Configurator is also integrated on the DVD of the Interactive Catalog CA 01, the offline version of the Siemens Industry Mall. You can order the CA 01 with your respective Siemens sales person or in the Internet: http://www.siemens.com/automation/CA01