|
Built-in motor |
|
|
1PH2 |
|
|
Coolant inlet temperature |
Because of the formation of condensation, we recommend a coolant inlet temperature of approx. 25 °C (77 °F), depending on the ambient conditions. |
|
Cooling water pressure at inlet, max |
7 bar |
|
Coolant flow rate
|
8 l/min (2.11 US gallons) |
|
Connecting thread |
Dependent on cooler used |
|
Temperature monitoring |
2 KTY 84 temperature sensors in the stator winding, 1 as reserve |
|
Insulation of the stator winding |
Temperature class 155 (F) for a coolant inlet temperature of up to 25 °C (77 °F) |
|
Motor encoder, recommended |
Hollow-shaft measuring system (not included in scope of supply) |
|
Type of construction(cf.ISO) |
Individual components: Stator, rotor |
|
Motor connection type |
Free cable ends with 0.5 m (19.7 in) or 1.5 m (59.1 in) length |
|
Balance quality of rotor in accordance with ISO 1940 1 |
1PH2093 to 1PH2118: G 2.5 |
|
Degree of protection |
IP00 |
|
Rating plate |
1 unit supplied separately |
|
Approvals, according to |
cURus |
For a list of heat exchanger manufacturers, please refer to Liquid cooling.