|
CNC options for SINUMERIK 828D BASIC T PPU 240.2/PPU 241.2 |
|
|---|---|
|
Description |
Order No. |
|
Manufacturer options |
|
|
Axis/spindle, each additional |
6FC5800 0AC20 0YB0 |
|
Positioning axis/auxiliary spindle, each additional |
6FC5800 0AC30 0YB0 |
|
TRANSMIT/Peripheral surface transformation |
6FC5800 0AM27 0YB0 |
|
Pair of synchronized axes (gantry axes), basic |
6FC5800 0AS51 0YB0 |
|
Travel to fixed stop with Force Control |
6FC5800 0AM01 0YB0 |
|
Generic coupling basic CP Basic1) |
6FC5800 0AM72 0YB0 |
|
Sag compensation, multi-dimensional (bidirectional error compensation) |
6FC5800 0AM55 0YB0 |
|
Master/slave for drives, basic |
6FC5800 0AS52 0YB0 |
|
Evaluation of internal drive variables |
6FC5800 0AS53 0YB0 |
|
SINUMERIK Operate runtime license OA Easy Screen |
6FC5800 0AP64 0YB0 |
|
Safety Integrated Extended Functions |
6FC5800 0AC50 0YB0 |
|
User options |
|
|
Advanced Technology |
6FC5800-0AP58-0YB0 |
|
Extended operator functions3) |
6FC5800 0AP16 0YB0 |
|
Machining step programming ShopTurn/ShopMill |
6FC5800 0AP17 0YB0 |
|
Residual material detection and machining for contour pockets and cutting |
6FC5800 0AP13 0YB0 |
|
3D simulation of the finished part |
6FC5800 0AP25 0YB0 |
|
Simultaneous recording (real-time simulation of current machining operation) |
6FC5800 0AP22 0YB0 |
|
Measuring cycles for drilling/milling and turning |
6FC5800 0AP28 0YB0 |
|
Network drive management |
6FC5800 0AP01 0YB0 |
|
Replacement tools for tool management |
6FC5800 0AM78 0YB0 |
|
RCS Host remote diagnostics function |
6FC5800-0AP30-0YB0 |
|
Contour handwheel |
6FC5800 0AM08 0YB0 |
|
Spline interpolation (A, B and C splines) |
6FC5800 0AS16 0YB0 |
1) For multi-edge turning in turning machines.
2)The CNC option extended technology functions provides you with the following technology cycles for the additional machining operations listed below:
- Asymmetric grooves
- Drill and thread milling
- Thread milling
- Multi-edge milling
- Engraving
- Extended stock removal along contour with segmentation of blank
- Contour grooving and plunge turning
- Milling of contour pockets and spigots (with up to 12 islands)
3) The operator functions in the basic scope of the SINUMERIK 828D BASIC T are dimensioned for standard applications. With the CNC option extended operator functions, the following additional operator functions can be enabled:
- Overstoring
- Teach-in
- DRF offset
- Extended block search
- Save workpiece setup data
- Display of active synchronous actions in HMI
- Number of levels for skip blocks 10
- Load/save MDA program