|
Motors: |
AH.K / Order No.: 1PS1 |
|---|---|
|
Shaft heights: |
355, 400, 450, 500, 560 |
|
Power range: |
80 kW - 2800 kW |
|
Number of poles: |
2 - 16 poles, higher pole numbers on request |
|
Voltage range: |
3000 V - 11000 V |
|
Rated voltage: |
3.3 kV / 4.16 kV / 6 kV / 6.6 kV / 10 kV / 11 kV |
|
Frequency converter: |
Line and converter operation |
|
Degree of protection: |
IP55, IP56, IP65, IP67 |
|
Cooling type: |
IC 411, IC 416, IC 71W |
|
Type of construction: |
IM B3, IM B35, IM V1 |
|
Enclosure: |
Welded steel |
|
Bearings: |
Roller bearings, sleeve bearings |
|
Standards: |
IEC, EN, DIN, VDE |
|
Explosion protection: |
II3G Ex nA II T3 |
|
Type of protection: |
N.A. |
|
Noise level: |
max. 85 dB(A) (load, 50 Hz), lower noise versions are available |
Features
- Also available for exceptional requirements such as dust explosion protection.
- Corrosion protection using special paint finishes according to the manufacturer's standard or customer's specification.
- The motors are available as special version for polar regions down to -40 °C (without pre-heating of the motor) or desert regions up to +60 °C.
- When required, vertical motors can also be equipped with thrust bearings for high axial and radial loads.
- Wide range of connection systems for large cable cross-sections, high short-circuit strength or phase-segregated version.
- Optimized starting and operating parameters and high efficiency by using copper bar rotors as standard.
- With water jacket cooling IC 71W up to 60 % higher power density - compact and low noise. Admirably suited for converter operation with constant load torque.