J series from Loher have a modular cooling design featuring double-flow inner cooling for a high power density and a homogeneous temperature distribution.
2 versions are available:

Mounted air-water heat exchanger

(type JHWK–... for roller bearings / JHXK-... for sleeve bearings):
Optimum cooling is guaranteed specifically for these series due to the harmonized and coordinated heat exchanger. The motor power loss is dissipated through the cooling water and is therefore de-coupled from the ambient temperature. The heat exchangers are available in a wide variety of versions with single and double pipe types. The high quality heat exchanger materials used are adapted to the specific requirements.

Mounted air-air heat exchanger

(type JHRK–... for roller bearings / JHQK-... for sleeve bearings):
The motors are equipped with air-air heat exchangers. The cooling pipes are manufactured out of galvanized steel; stainless steel versions are available for especially aggressive atmospheres.