Faster downloads save time
In every GAMMA instabus project, the devices are commissioned once they have been installed. Once the physical addresses have been assigned, application programs, parameters and addresses are loaded to the devices. Particularly in the case of larger projects with a large number of devices, this can be a time-consuming process. However, with the Siemens LAN connection, this can now all be carried out much faster. This saves you time and money.
Simply connect your notebook to the GAMMA instabus over the N 148/21 IP interface and start the download. By comparison: Using LAN, the download now only takes about half the time it required using RS232 or USB.
The solution
The benefits
- Planning, configuring, commissioning and diagnosis with ETS3 (KNX commissioning software)
- Simply connect your notebook and start the download
- Downloading twice as fast saves you considerable time during commissioning
Proceed as follows
- Connect the IP interface to the KNX
- Connect the notebook to the IP interface via the Ethernet cross cable – and start downloading.
You require the following
- N 148/21 IP interface (5WG1 148-1AB22)
- 24 V power supply for N 148/22 IP interface
(e.g. 4AC2 402, Power over Ethernet, unchoked bus voltage) - Ethernet cross cable
- LAN-capable notebook
- ETS3 (current versionseewww.knx.org)
Note:
LAN stands for Local Area Network. In LANs, data transport is organized over the IP (Internet Protocol) – the standard network protocol on the Internet.