8MF3528195
Внимание! Указаны цены архивного каталога СА01. Для уточнения актуальной цены перейдите по ссылке заказного номера товара или перейдите в каталог СА01 2016
Заказной номер Вес PG Описание продукта Цена
Roof Panel
Roof panel for cable entry in place of a standard closed roof panel
A rectangular cutout (with an angled panel fold along the rear edge) enables cables to be routed into the cubicle. With the aid of a similarly angled slide plate, the remaining gap can be closed down to the maximum cable diameter.
This optional roof panel (without routed cables) provides protection to IP40. If a higher degree of protection is required, it is recommended to incorporate a foam rubber profile or else to foam out the remaining gap.
Foam rubber profile
The foam rubber profile serves as a seal for cubicle cable entry cut-outs. It is provided with adhesive tape on one side.
Roof panel to accommodate busbars in place of a standard closed roof panel
Where it is necessary to mount busbars on the top of system cubicle frame, e.g. for space reasons, this roof panel version serves as an ideal cover.
The cubicle height is increased by 200 mm.
The clear passage provided for the busbars is:
- Height = 170 mm
- Depth = Cubicle depth minus 70 mm.
The panel is perforated in the area of the busbars to permit heat dissipation. The degree of protection provided is IP20.
Side cover panel for busbar roofs
This cover panel serves to prevent impermissible or accidental contact with the busbars. The same cover panel must be fitted on both sides of the roof.
Other versions on request.
Каталог оборудования 2012
Каталог продуктов Siemens Industry
Приводная техника
Техника автоматизации
Автоматизация зданий
Аппаратура модульного исполнения BETA
Распределительные шкафы ALPHA
Распределительные установки /Центры управления двигателями (МСС) SIVACON
Шинопровод
System Cubicles and Cubicle Lighting
8MF System Cubicles
8MC System Cubicles
Degrees of Protection
Cubicles, Non-Ventilated
Cubicles, Ventilated
Cubicle Interconnection
Cubicle Modifications
Front Cover/Locking Attachment
Back cover/Locking attachment
Roof Panel
Ventilation Slots and Gills
Perforated Roof Panel
Enclosure Parts
Cubicles Parts for Extension
Accessories
Specific Cubicles
Individual System Cubicle Solutions
Special Colours
Климатизация шкафа
Распределительные шкафы ALPHA
Устройства защиты
Выключатели и разъединители нагрузки
Коммутационные устройства
Источники питания
Система сборных шин SR60
Измерительные устройства и E-счетчики
Мониторы
Клеммы
Электроустановочное оборудование DELTA
Системы автоматизации зданий с instabus EIB
Программное обеспечение
Измерительные приборы BETA
Система сборных шин SR60
Устройства защиты от перенапряжений и молниезащита
Низковольтная коммутационная техника
Технология безопасности
Системные решения и продукты для отраслей
Сервис
... и все, что Вам еще необходимо
© ООО "СК ЭНЕРГО" 2007-2022
(4872) 700-366
Внимание! Указаны цены архивного каталога СА01. Для уточнения актуальной цены перейдите по ссылке заказного номера товара или перейдите в каталог СА01 2016
Заказной номер | Вес | PG | Описание продукта | Цена |
Roof panel for cable entry in place of a standard closed roof panel
A rectangular cutout (with an angled panel fold along the rear edge) enables cables to be routed into the cubicle. With the aid of a similarly angled slide plate, the remaining gap can be closed down to the maximum cable diameter.
This optional roof panel (without routed cables) provides protection to IP40. If a higher degree of protection is required, it is recommended to incorporate a foam rubber profile or else to foam out the remaining gap.
Foam rubber profile
The foam rubber profile serves as a seal for cubicle cable entry cut-outs. It is provided with adhesive tape on one side.
Roof panel to accommodate busbars in place of a standard closed roof panel
Where it is necessary to mount busbars on the top of system cubicle frame, e.g. for space reasons, this roof panel version serves as an ideal cover.
The cubicle height is increased by 200 mm.
The clear passage provided for the busbars is:
- Height = 170 mm
- Depth = Cubicle depth minus 70 mm.
The panel is perforated in the area of the busbars to permit heat dissipation. The degree of protection provided is IP20.
Side cover panel for busbar roofs
This cover panel serves to prevent impermissible or accidental contact with the busbars. The same cover panel must be fitted on both sides of the roof.
Other versions on request.
© ООО "СК ЭНЕРГО" 2007-2022 (4872) 700-366 |