Siemens
ÑÐÅÄÑÒÂÀ ÏÐÎÌÛØËÅÍÍÎÉ ÀÂÒÎÌÀÒÈÇÀÖÈÈ
îôèöèàëüíûé ïàðòíåð Ñèìåíñ
Êàòàëîã ÑÀ01 2018
(4872) 700-366
skenergo@mail.ru

General technical specifications

Electrical specifications

Line power factor

 

  • Basic fundamental (cos Ï†1)

1 (factory setting),
can be altered by inputting a reactive current setpoint

  • Total (λ)

1 (factory setting)

Efficiency

>97.5 % (including Active Interface Module)

DC link voltage

The DC link voltage is regulated and can be adjusted as a voltage decoupled from the line voltage.
Factory setting of the DC link voltage: 1.5 Ã— line voltage

Radio interference suppression

 
  • Standard (Active Line Module with Active Interface Module)

Category C3 to EN 61800‑3

  • With line filter

Category C2 to EN 61800‑3



Line voltage 380 ... 480 V 3 AC

Active Line Modules

 

6SL3330-7TE32-1AA3

6SL3330-7TE32-6AA3

6SL3330-7TE33-8AA3

6SL3330-7TE35-0AA3

6SL3330-7TE36-1AA3

Rated power

 

 

 

 

 

 

  • At Irated DC (50 Hz 400 V)

kW

132

160

235

300

380

  • At IH DC (50 Hz 400 V)

kW

115

145

210

270

335

  • At Irated DC (60 Hz 460 V)

hp

200

250

400

500

600

  • At IH DC (60 Hz 460 V)

hp

150

200

300

400

500

DC link current

 

 

 

 

 

 

  • Rated current Irated DC

A

235

291

425

549

678

  • Base-load current IH DC 1)

A

209

259

378

489

603

  • Maximum current Imax DC

A

352

436

637

823

1017

Infeed/regenerative feedback current

 

 

 

 

 

 

  • Rated current Irated I

A

210

260

380

490

605

  • Maximum current Imax I

A

315

390

570

735

907

Current demand

 

 

 

 

 

 

  • 24 V DC auxiliary power supply

A

1.1

1.1

1.35

1.35

1.4

  • 400 V AC

A

0.63

1.13

1.8

1.8

3.6

DC link capacitance

 

 

 

 

 

 

  • Active Line Module

μF

4200

5200

7800

9600

12600

  • Drive line-up, max.

μF

41600

41600

76800

76800

134400

Power loss, max. 2)

 

 

 

 

 

 

  • At 50 Hz 400 V

kW

2.2

2.7

3.9

4.8

6.2

  • At 60 Hz 460 V

kW

2.3

2.9

4.2

5.1

6.6

Cooling air requirement

m3/s (ft3/s)

0.17 (6.00)

0.23 (8.12)

0.36 (12.7)

0.36 (12.7)

0.78 (27.5)

Sound pressure level LpA 3)

(1 m) at 50/60 Hz

dB

64/67

71/71

69/73

69/73

70/73

Line supply connection

U1, V1, W1

 

Flat connector for M10 screw

Flat connector for M10 screw

Flat connector for M10 screw

Flat connector for M10 screw

Flat connector for M12 screw

  • Conductor cross-section, max. (IEC)

mm2

2 Ã— 185

2 Ã— 185

2 Ã— 240

2 Ã— 240

4 Ã— 240

DC link connection

DCP, DCN

 

M10 screw

M10 screw

M10 screw

M10 screw

4 Ã— hole for M12

  • Conductor cross-section, max. (IEC)

mm2

2 Ã— 185

2 Ã— 185

2 Ã— 240

2 Ã— 240

Busbar

PE1/GND connection

 

M10 screw

M10 screw

M10 screw

M10 screw

M12 screw

  • Conductor cross-section, max. (IEC)

mm2

2 Ã— 185

2 Ã— 185

2 Ã— 240

2 Ã— 240

240

PE2/GND connection

 

M10 screw

M10 screw

M10 screw

M10 screw

2 Ã— M12 screw

  • Conductor cross-section, max. (IEC)

mm2

2 Ã— 185

2 Ã— 185

2 Ã— 240

2 Ã— 240

2 Ã— 240

Cable length, max. 4)

 

 

 

 

 

 

  • Shielded

m (ft)

2700 (8858)

2700 (8858)

2700 (8858)

2700 (8858)

3900 (12795)

  • Unshielded

m (ft)

4050 (13287)

4050 (13287)

4050 (13287)

4050 (13287)

5850 (19193)

Degree of protection

 

IP20

IP20

IP20

IP20

IP00

Dimensions

 

 

 

 

 

 

  • Width

mm (in)

326 (12.8)

326 (12.8)

326 (12.8)

326 (12.8)

503 (19.8)

  • Height

mm (in)

1400 (55.1)

1400 (55.1)

1533 (60.4)

1533 (60.4)

1475 (58.1)

  • Depth

mm (in)

356 (14.0)

356 (14.0)

545 (21.5)

545 (21.5)

540 (21.3)

Weight, approx.

kg (lb)

95 (209)

95 (209)

136 (300)

136 (300)

290 (639)

Frame size

 

FX

FX

GX

GX

HX

Minimum short-circuit current 5)

A

6200

10500

10500

8000

9200



1) The base-load current IH DC is the basis for a duty cycle of 150 % for 60 s or Imax DC for 5 s with a duty cycle duration of 300 s.

2) The specified power loss represents the maximum value at 100 % utilization. The value is lower under normal operating conditions.

3) Total sound pressure level of Active Interface Module and Active Line Module.

4) Total of all motor cables and DC link. Longer cable lengths for specific configurations are available on request. For additional information, please refer to the SINAMICS Low Voltage Engineering Manual.

5) Current required for reliably triggering protective devices.

Line voltage 380 ... 480 V 3 AC

Active Line Modules

 

6SL3330-7TE37-5AA3

6SL3330-7TE38-4AA3

6SL3330-7TE41-0AA3

6SL3330-7TE41-2AA3

6SL3330-7TE41-4AA3

Rated power

 

 

 

 

 

 

  • At Irated DC (50 Hz 400 V)

kW

450

500

630

800

900

  • At IH DC (50 Hz 400 V)

kW

400

465

545

690

780

  • At Irated DC (60 Hz 460 V)

hp

600

700

900

1000

1250

  • At IH DC (60 Hz 460 V)

hp

600

700

800

900

1000

DC link current

 

 

 

 

 

 

  • Rated current Irated DC

A

835

940

1103

1412

1574

  • Base-load current IH DC 1)

A

700

837

982

1255

1401

  • Maximum current Imax DC

A

1252

1410

1654

2120

2361

Infeed/regenerative feedback current

 

 

 

 

 

 

  • Rated current Irated I

A

745

840

985

1260

1405

  • Maximum current Imax I

A

1117

1260

1477

1890

2107

Current demand

 

 

 

 

 

 

  • 24 V DC auxiliary power supply

A

1.4

1.4

1.5

1.7

1.7

  • 400 V AC

A

3.6

3.6

5.4

5.4

5.4

DC link capacitance

 

 

 

 

 

 

  • Active Line Module

μF

15600

16800

18900

26100

28800

  • Drive line-up, max.

μF

134400

134400

230400

230400

230400

Power loss, max. 2)

 

 

 

 

 

 

  • At 50 Hz 400 V

kW

7.3

7.7

10.1

12.1

13.3

  • At 60 Hz 460 V

kW

7.7

8.2

10.8

13.0

14.2

Cooling air requirement

m3/s (ft3/s)

0.78 (27.5)

0.78 (27.5)

1.08 (38.1)

1.08 (38.1)

1.08 (38.1)

Sound pressure level LpA 3)

(1 m) at 50/60 Hz

dB

70/73

70/73

71/73

71/73

71/73

Line supply connection

U1, V1, W1

 

Flat connector for M12 screw

Flat connector for M12 screw

Flat connector for M12 screw

Flat connector for M12 screw

Flat connector for M12 screw

  • Conductor cross-section, max. (IEC)

mm2

4 Ã— 240

4 Ã— 240

6 Ã— 240

6 Ã— 240

6 Ã— 240

DC link connection

DCP, DCN

 

4 Ã— hole for M12

4 Ã— hole for M12

4 Ã— hole for M12

4 Ã— hole for M12

4 Ã— hole for M12

  • Conductor cross-section, max. (IEC)

mm2

Busbar

Busbar

Busbar

Busbar

Busbar

PE1/GND connection

 

M12 screw

M12 screw

M12 screw

M12 screw

M12 screw

  • Conductor cross-section, max. (IEC)

mm2

240

240

240

240

240

PE2/GND connection

 

2 Ã— M12 screw

2 Ã— M12 screw

3 Ã— M12 screw

3 Ã— M12 screw

3 Ã— M12 screw

  • Conductor cross-section, max. (IEC)

mm2

2 Ã— 240

2 Ã— 240

3 Ã— 240

3 Ã— 240

3 Ã— 240

Cable length, max. 4)

 

 

 

 

 

 

  • Shielded

m (ft)

3900 (12795)

3900 (12795)

3900 (12795)

3900 (12795)

3900 (12795)

  • Unshielded

m (ft)

5850 (19193)

5850 (19193)

5850 (19193)

5850 (19193)

5850 (19193)

Degree of protection

 

IP00

IP00

IP00

IP00

IP00

Dimensions

 

 

 

 

 

 

  • Width

mm (in)

503 (19.8)

503 (19.8)

704 (27.7)

704 (27.7)

704 (27.7)

  • Height

mm (in)

1475 (58.1)

1475 (58.1)

1480 (58.3)

1480 (58.3)

1480 (58.3)

  • Depth

mm (in)

540 (21.3)

540 (21.3)

550 (21.7)

550 (21.7)

550 (21.7)

Weight, approx.

kg (lb)

290 (639)

290 (639)

450 (992)

450 (992)

450 (992)

Frame size

 

HX

HX

JX

JX

JX

Minimum short-circuit current 5)

A

8800

10400

16000

21000

21000



1) The base-load current IH DC is the basis for a duty cycle of 150 % for 60 s or Imax DC for 5 s with a duty cycle duration of 300 s.

2) The specified power loss represents the maximum value at 100 % utilization. The value is lower under normal operating conditions.

3) Total sound pressure level of Active Interface Module and Active Line Module.

4) Total of all motor cables and DC link. Longer cable lengths for specific configurations are available on request. For additional information, please refer to the SINAMICS Low Voltage Engineering Manual.

5) Current required for reliably triggering protective devices.

Line voltage 500 ... 690 V 3 AC

Active Line Modules

 

6SL3330-7TG35-8AA3

6SL3330-7TG37-4AA3

6SL3330-7TG41-0AA3

6SL3330-7TG41-3AA3

Rated power

 

 

 

 

 

  • At Irated DC (50 Hz 690 V)

kW

630

800

1100

1400

  • At IH DC (50 Hz 690 V)

kW

620

705

980

1215

  • At Irated DC (50 Hz 500 V)

kW

447

560

780

965

  • At IH DC (50 Hz 500 V)

kW

450

510

710

880

  • At Irated DC (60 Hz 575 V)

hp

675

900

1250

1500

  • At IH DC (60 Hz 575 V)

hp

506

600

1000

1250

DC link current

 

 

 

 

 

  • Rated current Irated DC

A

644

823

1148

1422

  • Base-load current IH DC 1)

A

573

732

1022

1266

  • Maximum current Imax DC

A

966

1234

1722

2133

Infeed/regenerative feedback current

 

 

 

 

 

  • Rated current Irated I

A

575

735

1025

1270

  • Maximum current Imax I

A

862

1102

1537

1905

Current demand

 

 

 

 

 

  • 24 V DC auxiliary power supply

A

1.4

1.5

1.7

1.7

  • 500 V AC

A

3.0

4.4

4.4

4.4

  • 690 V AC

A

2.1

3.1

3.1

3.1

DC link capacitance

 

 

 

 

 

  • Active Line Module

μF

7400

11100

14400

19200

  • Drive line-up, max.

μF

59200

153600

153600

153600

Power loss, max. 2)

 

 

 

 

 

  • At 50 Hz 690 V

kW

6.8

10.2

13.6

16.5

  • At 60 Hz 575 V

kW

6.2

9.6

12.9

15.3

Cooling air requirement

m3/s (ft3/s)

0.78 (27.5)

1.08 (38.1)

1.08 (38.1)

1.08 (38.1)

Sound pressure level LpA 3)

(1 m) at 50/60 Hz

dB

70/73

71/73

71/73

71/73

Line supply connection

U1, V1, W1

 

Flat connector for M12 screw

Flat connector for M12 screw

Flat connector for M12 screw

Flat connector for M12 screw

  • Conductor cross-section, max. (IEC)

mm2

4 Ã— 240

6 Ã— 240

6 Ã— 240

6 Ã— 240

DC link connection

DCP, DCN

 

4 Ã— hole for M12

4 Ã— hole for M12

4 Ã— hole for M12

4 Ã— hole for M12

  • Conductor cross-section, max. (IEC)

mm2

Busbar

Busbar

Busbar

Busbar

PE1/GND connection

 

M12 screw

M12 screw

M12 screw

M12 screw

  • Conductor cross-section, max. (IEC)

mm2

240

240

240

240

PE2/GND connection

 

2 Ã— M12 screw

3 Ã— M12 screw

3 Ã— M12 screw

3 Ã— M12 screw

  • Conductor cross-section, max. (IEC)

mm2

2 x 240

3 x 240

3 x 240

3 x 240

Cable length, max. 4)

 

 

 

 

 

  • Shielded

m (ft)

2250 (7382)

2250 (7382)

2250 (7382)

2250 (7382)

  • Unshielded

m (ft)

3375 (11073)

3375 (11073)

3375 (11073)

3375 (11073)

Degree of protection

 

IP00

IP00

IP00

IP00

Dimensions

 

 

 

 

 

  • Width

mm (in)

503 (19.8)

704 (27.7)

704 (27.7)

704 (27.7)

  • Height

mm (in)

1475 (58.1)

1480 (58.3)

1480 (58.3)

1480 (58.3)

  • Depth

mm (in)

540 (21.3)

550 (21.7)

550 (21.7)

550 (21.7)

Weight, approx.

kg (lb)

290 (639)

450 (992)

450 (992)

450 (992)

Frame size

 

HX

JX

JX

JX

Minimum short-circuit current 5)

A

8400

10500

16000

20000



1) The base-load current IH DC is the basis for a duty cycle of 150 % for 60 s or Imax DC for 5 s with a duty cycle duration of 300 s.

2) The specified power loss represents the maximum value at 100 % utilization. The value is lower under normal operating conditions.

3) Total sound pressure level of Active Interface Module and Active Line Module.

4) Total of all motor cables and DC link. Longer cable lengths for specific configurations are available on request. For additional information, please refer to the SINAMICS Low Voltage Engineering Manual.

5) Current required for reliably triggering protective devices.

















skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Àðìàòóðà DENDOR

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Äàò÷èêè è èçìåðèòåëè

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ðåãóëÿòîðû è ðåãèñòðàòîðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ïíåâìàòè÷åñêîå îáîðóäîâàíèå

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Êðàíû è Êëàïàíû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Èçìåðèòåëüíûå ïðèáîðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ñèñòåìû áåñïðîâîäíîãî óïðàâëåíèÿ «óìíûé äîì»

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Áåñêîíòàêòíûå âûêëþ÷àòåëè Êîíå÷íûå âûêëþ÷àòåëè Îïòè÷åñêèå äàò÷èêè Ýíêîäåðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Óñòàíîâêà óìÿã÷åíèÿ

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Óñòàíîâêà îáåçæåëåçèâàíèÿ
Êàòàëîã îáîðóäîâàíèÿ 2018
Siemens Industry Catalog Drive technology Automation technology Energy Building Technologies Low-Voltage controls and distribution Safety Systems - Safety Integrated Market-specific solutions Automotive industry Biofuels and bioenergy Chemical and petrochemical industries Food, drinks and tobacco industry Machine building Packaging machines Printing presses Textile machines Converting Tire production machines Metal forming technology Glass production machines Handling systems Solar production machines Ceramics and stone processing machines Cranes Plastics Machine Tools SINUMERIK 808 with SINAMICS V60/V70 SINUMERIK 828 with SINAMICS S120 SINUMERIK 840 with SINAMICS S120 Introduction SINUMERIK 840D sl with SINAMICS S120 SINUMERIK CNC control SINUMERIK Operate SINUMERIK Integrate SINAMICS S120 drive system System data Communication Engineering software Control Units Booksize format Chassis format Active Line Modules Active Interface Modules Recommended line-side components Motor Modules Braking Modules Braking resistors Blocksize format SINAMICS S120 Combi SINAMICS S120M distributed servo drive Supplementary system components Encoder system connection Motion Control Encoder measuring systems CAD CREATOR SIMOTICS motors MOTION-CONNECT connection systems Lifecycle Services SINUMERIK Partners Certificates of suitability (approvals) Glossary SINUMERIK 840 Glossary SINAMICS S120 drive system List of abbreviations Drive applications Mining and Metals Oil and gas industry Pharmaceutical industry Pulp and paper industry Water / wastewater Electrical wholesale Industry Services Software ... and everything else you need




  © ÎÎÎ "ÑÊ ÝÍÅÐÃÎ" 2007-2022
  (4872) 700-366  skenergo@mail.ru
ßíäåêñ.Ìåòðèêà