Basic Line Modules . Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Basic Line Modules

| | | | | |

General technical specifications

Electrical specifications
Line power factor at rated power
Basic fundamental (cos П†₁)	>0.96
Total (О»)	0.75 ... 0.93
Efficiency	>99 %
DC link voltage, approx. ¹⁾	1.35 Г— line voltage under partial load 1.32 Г— line voltage under full load
Main contactor control
Terminal block -X9/5-6	240 V AC, max. 8 A 30 V DC, max. 1 A

¹⁾ The DC link voltage is unregulated and load-dependent. For additional information, please refer to the SINAMICS Low Voltage Engineering Manual.

Line voltage 380 ... 480 V 3 AC		Basic Line Modules
		6SL3330-1TE34-2AA3	6SL3330-1TE35-3AA3	6SL3330-1TE38-2AA3	6SL3330-1TE41-2AA3	6SL3330-1TE41-5AA3	6SL3330-1TE41-8AA3
Rated power
At I_rated DC (50 Hz 400 V)	kW	200	250	400	560	710	900
At I_H DC (50 Hz 400 V)	kW	160	200	315	450	560	705
At I_rated DC (60 Hz 460 V)	hp	305	385	615	860	1090	1390
At I_H DC (60 Hz 460 V)	hp	245	305	485	690	860	1090
DC link current
Rated current I_rated DC	A	420	530	820	1200	1500	1880
Base-load current I_H DC¹⁾	A	328	413	640	936	1170	1467
Maximum current I_max DC	A	630	795	1230	1800	2250	2820
Input current
Rated current I_rated I	A	365	460	710	1010	1265	1630
Maximum current I_max I	A	547	690	1065	1515	1897	2380
вЂў Max. pre-charging current (max. 3 s)	A	Internal	Internal	Internal	Internal	Internal	308
Current demand
24 V DC auxiliary power supply	A	1.1	1.1	1.1	1.1	1.1	1.1
DC link capacitance
Basic Line Module	ОјF	7200	9600	14600	23200	29000	34800
Drive line-up, max.	ОјF	57600	76800	116800	185600	232000	139200/278400 ²⁾
Power loss, max. ³⁾
At 50 Hz 400 V	kW	1.9	2.1	3.2	4.6	5.5	6.9
At 60 Hz 460 V	kW	1.9	2.1	3.2	4.6	5.5	6.9
Cooling air requirement	m³/s (ft³/s)	0.17 (6.00)	0.17 (6.00)	0.17 (6.00)	0.36 (12.7)	0.36 (12.7)	0.36 (12.7)
Sound pressure level L_pA (1 m) at 50/60 Hz	dB	66/68	66/68	66/68	71/73	71/73	71/73
Line connection U1, V1, W1		Flat connector for M10 screw	Flat connector for M10 screw	Flat connector for M10 screw	Flat connector for M12 screw	Flat connector for M12 screw	Flat connector for M12 screw
Conductor cross-section, max. (IEC)	mm²	2 Г— 240	2 Г— 240	2 Г— 240	6 Г— 185	6 Г— 185	6 Г— 185
DC link connection DCP, DCN		M10 screw	M10 screw	M10 screw	3 Г— hole for M12	3 Г— hole for M12	3 Г— hole for M12
Conductor cross-section, max. (IEC)	mm²	2 Г— 240	2 Г— 240	2 Г— 240	6 Г— 185	6 Г— 185	6 Г— 185
PE/GND connection		2 Г— hole for M10	2 Г— hole for M10	2 Г— hole for M10	2 Г— hole for M12	2 Г— hole for M12	2 Г— hole for M12
Conductor cross-section, max. (IEC)	mm²	2 Г— 240	2 Г— 240	2 Г— 240	4 Г— 240	4 Г— 240	4 Г— 240
Cable length, max. ⁴⁾
Shielded	m (ft)	2600 (8530)	2600 (8530)	2600 (8530)	4000 (13123)	4000 (13123)	4800 (15748)
Unshielded	m (ft)	3900 (12795)	3900 (12795)	3900 (12795)	6000 (19685)	6000 (19685)	7200 (23622)
Degree of protection		IP00	IP00	IP00	IP00	IP00	IP00
Dimensions
Width	mm (in)	310 (12.2)	310 (12.2)	310 (12.2)	310 (12.2)	310 (12.2)	310 (12.2)
Height	mm (in)	1164 (45.8)	1164 (45.8)	1164 (45.8)	1653 (65.1)	1653 (65.1)	1653 (65.1)
Depth	mm (in)	352 (13.9)	352 (13.9)	352 (13.9)	550 (21.7)	550 (21.7)	550 (21.7)
Weight, approx.	kg (lb)	96 (212)	96 (212)	96 (212)	214 (472)	214 (472)	214 (472)
Frame size		FB	FB	FB	GB	GB	GD
Minimum short-circuit current ⁵⁾	A	4400	5200	10000	12400	18400	18600

¹⁾ The base-load current I_{H DC} is the basis for a duty cycle of 150 % for 60 s or I_{max DC} for 5 s with a duty cycle duration of 300 s.

²⁾ The first value applies for one pre-charging resistor for each phase, the second value for two pre-charging resistors connected in parallel for each phase.

³⁾ The specified power loss represents the maximum value at 100 % utilization. The value is lower under normal operating conditions.

⁴⁾ Total of all motor cables and DC link. Longer cable lengths for specific configurations are available on request. For additional information, please refer to the SINAMICS Low Voltage Engineering Manual.

⁵⁾ Current required for reliably triggering protective devices.

Line voltage 500 ... 690 V 3 AC		Basic Line Modules
		6SL3330-1TG33-0AA3	6SL3330-1TG34-3AA3	6SL3330-1TG36-8AA3	6SL3330-1TG41-1AA3	6SL3330-1TG41-4AA3	6SL3330-1TG41-8AA3
Rated power
At I_rated DC (50 Hz 690 V)	kW	250	355	560	900	1100	1500
At I_H DC (50 Hz 690 V)	kW	195	280	440	710	910	1220
At I_rated DC (50 Hz 500 V)	kW	175	250	390	635	810	1085
At I_H DC (50 Hz 500 V)	kW	165	235	365	595	755	1015
At I_rated DC (60 Hz 575 V)	hp	250	350	600	900	1250	1500
At I_H DC (60 Hz 575 V)	hp	200	300	450	800	1000	1250
DC link current
Rated current I_rated DC	A	300	430	680	1100	1400	1880
Base-load current I_H DC¹⁾	A	234	335	530	858	1092	1467
Maximum current I_max DC	A	450	645	1020	1650	2100	2820
Input current
Rated current I_rated I	A	260	375	575	925	1180	1580
Maximum current I_max I	A	390	563	863	1388	1770	2370
Max. pre-charging current (max. 3 s)	A	Internal	Internal	Internal	Internal	Internal	234
Current demand
24 V DC auxiliary power supply	A	1.1	1.1	1.1	1.1	1.1	1.1
DC link capacitance
Basic Line Module	ОјF	3200	4800	7300	11600	15470	19500
Drive line-up, max.	ОјF	25600	38400	58400	92800	123760	78000/156000 ²⁾
Power loss, max. ³⁾
At 50 Hz 690 V	kW	1.5	2.1	3.0	5.4	5.8	7.3
At 60 Hz 575 V	kW	1.5	2.1	3.0	5.4	5.8	7.3
Cooling air requirement	m³/s (ft³/s)	0.17 (6.00)	0.17 (6.00)	0.17 (6.00)	0.36 (12.7)	0.36 (12.7)	0.36 (12.7)
Sound pressure level L_pA (1 m) at 50/60 Hz	dB	66/68	66/68	66/68	71/73	71/73	71/73
Line connection U1, V1, W1		Flat connector for M10 screw	Flat connector for M10 screw	Flat connector for M10 screw	Flat connector for M12 screw	Flat connector for M12 screw	Flat connector for M12 screw
Conductor cross-section, max. (IEC)	mm²	2 Г— 240	2 Г— 240	2 Г— 240	6 Г— 185	6 Г— 185	6 Г— 185
DC link connection DCP, DCN		M10 screw	M10 screw	M10 screw	3 Г— hole for M12	3 Г— hole for M12	3 Г— hole for M12
Conductor cross-section, max. (IEC)	mm²	2 Г— 240	2 Г— 240	2 Г— 240	6 Г—185	6 Г— 185	6 Г— 185
PE/GND connection		2 Г— hole for M10	2 Г— hole for M10	2 Г— hole for M10	2 Г— hole for M12	2 Г— hole for M12	2 Г— hole for M12
Conductor cross-section, max. (IEC)	mm²	2 Г— 240	2 Г— 240	2 Г— 240	4 Г— 240	4 Г— 240	4 Г— 240
Cable length, max. ⁴⁾
Shielded	m (ft)	1500 (4921)	1500 (4921)	1500 (4921)	2250 (7382)	2250 (7382)	2750 (9022)
Unshielded	m (ft)	2250 (7382)	2250 (7382)	2250 (7382)	3375 (11073)	3375 (11073)	4125 (13533)
Degree of protection		IP00	IP00	IP00	IP00	IP00	IP00
Dimensions
Width	mm (in)	310 (12.2)	310 (12.2)	310 (12.2)	310 (12.2)	310 (12.2)	310 (12.2)
Height	mm (in)	1164 (45.8)	1164 (45.8)	1164 (45.8)	1653 (65.1)	1653 (65.1)	1653 (65.1)
Depth	mm (in)	352 (13.9)	352 (13.9)	352 (13.9)	550 (21.7)	550 (21.7)	550 (21.7)
Weight, approx.	kg (lb)	96 (212)	96 (212)	96 (212)	214 (472)	214 (472)	214 (472)
Frame size		FB	FB	FB	GB	GB	GD
Minimum short-circuit current ⁵⁾	A	3000	4400	8000	10400	16000	18600

¹⁾ The base-load current I_{H DC} is the basis for a duty cycle of 150 % for 60 s or I_{max DC} for 5 s with a duty cycle duration of 300 s.

²⁾ The first value applies for one pre-charging resistor for each phase, the second value for two pre-charging resistors connected in parallel for each phase.

³⁾The specified power loss represents the maximum value at 100 % utilization. The value is lower under normal operating conditions.

⁵⁾ Current required for reliably triggering protective devices.

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания