Intelligent Operator Panel IOP‑2 Handheld

IOP‑2 Handheld for mobile use

The Intelligent Operator Panel IOP‑2 Handheld is a very user-friendly and powerful operator panel for commissioning and diagnostics as well as local operator control and monitoring of SINAMICS G110D, SINAMICS G120D, SINAMICS G110M and SIMATIC ET 200pro FC‑2 distributed inverters.

The IOP‑2 Handheld supports both newcomers and drive experts. Thanks to the membrane keyboard with a central sensor control field, the high-contrast color displays, the menu-based operation and the application wizards, it is easy to commission standard drives. A drive can be essentially commissioned without having to use a printed parameter list – as the parameters are displayed in plain text, and explanatory help texts and the parameter filtering function are provided.

Application wizards interactively guide you when commissioning important applications such as conveyor technology, pumps, fans and compressors. There is a basic commissioning wizard for general commissioning.

Up to two process values can be graphically visualized and up to four process values can be numerically visualized on the status screen/display. Process values can also be displayed in technological units.

The IOP‑2 Handheld supports standard commissioning of identical drives. For this purpose, a parameter list can be copied from a frequency converter into the IOP‑2 Handheld and downloaded into other drive units of the same type as required.

In addition to the IOP‑2, the IOP‑2 Handheld includes a housing with rechargeable batteries, a charging unit, an RS232 connecting cable, and a USB cable. The charging unit is supplied with connector adapters for Europe, the US and the UK. When the batteries are fully charged, the operating time is up to 10 hours.

To connect the IOP‑2 Handheld to SINAMICS G110D, SINAMICS G120D, SINAMICS G110M and SIMATIC ET 200pro FC‑2, the RS232 connecting cable with optical interface is required in addition.

Updating the IOP‑2 Handheld

The IOP‑2 Handheld can be updated and expanded using the integrated USB interface.

Data to support future drive systems can be transferred from the PC to the IOP‑2 Handheld. Further, the USB interface allows user languages and wizards that will become available in the future to be subsequently downloaded and the firmware to be updated for the IOP‑2 Handheld ¹⁾.

¹⁾ Information on updates for the IOP‑2 Handheld is available at
https://support.industry.siemens.com/cs/document/67273266/sinamics-g:-iop-version?lc=en-ww

Selection and ordering data

Technical specifications

Memory cards

SINAMICS SD memory card

The parameter settings for a converter can be stored on the SINAMICS SD memory card. When service is required, e. g. after the converter has been replaced and the data have been downloaded from the memory card, the drive system is immediately ready for use again.

• Parameter settings can be written from the memory card to the converter or saved from the converter to the memory card.
• Up to 100 parameter sets can be stored.
• The memory card supports standard commissioning without the use of the IOP‑2 Handheld Intelligent Operator Panel or the STARTER and SINAMICS Startdrive commissioning tools.
• If firmware is stored on the memory card and a Control Unit is installed, the firmware can be upgraded/downgraded during power-up ¹⁾.

Note:

The memory card is optional, but it facilitates converter replacement.

¹⁾ You can find more information about firmware upgrades/downgrades on the Internet at: 
https://support.industry.siemens.com/cs/document/67364620/sinamics-g%3A-currently-available-firmware-releases-and-the-upgrade-downgrade-options-?dti=0&lc=en-WW

Selection and ordering data

For an overview and more information on all available firmware versions, see https://support.industry.siemens.com/cs/document/67364620/sinamics-g%3A-currently-available-firmware-releases-and-the-upgrade-downgrade-options-?dti=0&lc=en-WW

STARTER commissioning tool

The STARTER commissioning tool (V4.4 and higher) plus SSP supports the commissioning and maintenance of SIMATIC ET 200pro FC‑2 frequency converters. The operator guidance combined with comprehensive, user-friendly functions for the relevant drive solution allow you to commission the device quickly and easily.

You can find further information about the STARTER commissioning tool in the section Engineering tools.

²⁾ The STARTER commissioning tool is also available on the Internet at http://www.siemens.com/starter

PC inverter connection kit 2

The mini USB interface cable is used to control and commission a converter directly from a PC via a point-to-point connection if the appropriate software (STARTER commissioning tool version 4.4 and higher, plus SSP) has been installed.

Connecting cables pre-assembled at one end and connector sets to connect to the line supply

Motor cables pre-assembled at one end and connector sets to connect the converter to the motor

Power jumper connector

The power jumper connector is used for 400 V power transmission to following 400 V modules.