More information

UP 525/31

Universal dimmer UP 525/31, 210 VA, AC 230 V, 50 Hz (R,L,C load)

• One output for switching and dimming resistive, inductive or capacitive loads
• With semiconductor output for switching and dimming of lamps
• Rated operational voltage AC 230 V, 50/60 Hz
• Connected load 50...210 VA
• Settable switching and dimming behaviour
• Selectable mode of operation (normal mode, timer mode)
• Soft on, Soft off
• Dimming or jumping to a new dimming value
• Time-delayed switch-off when dimming below a settable dimming value
• Status objects for switching and dimming value
• Short-circuit message
• Message of a load failure
• Integrated 8-bit scene control
• Object for blocking the output
• Configurable brightness value at start and end of a blocking phase
• Adjustable behaviour of the output after bus voltage recovery
• 2 binary inputs for potential-free contacts
• Selectable function of the binary inputs: acting as secondary inputs directly on the switching outputs or acting as independant binary inputs with bus communication
• Free allocation of the functions switching, dimming, solar protection control, send value and scene control to the inputs
• Two independent switching objects per input
• Blocking object for each input
• Separately selectable behaviour per input at bus voltage recovery
• Telegram rate limitation for both inputs
• About 20 cm long wires for connecting phase conductor, output, inputs and bus
• Bus-powered electronics
• Integrated bus coupling unit, bus connection via bus terminal
• For installation in a flush-mounting wall or ceiling box with Гё 60 mm