The SMC30 Sensor Module Cabinet‑Mounted features the following connections and interfaces as standard:

• 1 encoder connection including motor temperature sensing (KTY84‑130, Pt1000 or PTC) either via D‑sub connector or via terminals
• 1 DRIVE-CLiQ interface
• 1 connection for the electronics power supply via the 24 V DC supply connector
• 1 PE connection

The status of the SMC30 Sensor Module Cabinet-Mounted is indicated using a multi-color LED.

The SMC30 Sensor Module Cabinet-Mounted can be snapped onto a TH 35 standard mounting rail in accordance with EN 60715 (IEC 60715).

The maximum encoder cable length between SMC30 modules and encoders is 100 m. For HTL encoders, this length can be increased to 300 m if the A+/A- and B+/B- signals are evaluated and the power supply cable has a minimum cross-section of 0.5 mm².

The signal cable shield can be connected to the SMC30 Sensor Module Cabinet‑Mounted via a shield connection terminal, e.g., Phoenix Contact type SK8 or WeidmГјller type KLBГњ CO 1. The shield connection terminal must not be used as a strain relief mechanism.