The Basic Line Modules in booksize format feature the following connections and interfaces as standard:

• 1 power connection
• 1 connection for the 24 V DC electronics power supply
• 1 DC link connection
• 3 DRIVE‑CLiQ sockets
• 1 connection for braking resistor
  (20 kW (25 hp) and 40 kW (50 hp) Basic Line Modules only)
• 1 temperature sensor input for KTY84‑130, Pt1000 or PTC (Pt1000 can be used from firmware V4.7 HF17)

The status of the Basic Line Modules is indicated via two multi-color LEDs.

The scope of supply of the Basic Line Modules includes:

• DRIVE-CLiQ cable for connection to the adjacent Control Unit on the left for drive control, length 0.11 m (4.33 in)
• DRIVE‑CLiQ cable (length depends on Basic Line Module width) for connection to the adjacent Motor Module, length = width of Basic Line Module + 0.11 m (4.33 in)
• Jumper for connecting the 24 V DC busbar to the adjacent Motor Module
• 24 V terminal adapter (X24)
• Connector X21
• 2 blanking plugs for sealing unused DRIVE‑CLiQ sockets
• 1 set of warning labels in 30 languages