SIMOTION CX32-2 Controller Extension . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIMOTION CX32-2 Controller Extension

| | | | |

Article number		6AU1432-2AA00-0AA0
Product brand name		SIMOTION
Product type designation		CX32-2
Version of the motion control system		Controller Extension
Integrated drive control
Maximum number of axes for integrated drive control
в—Џ servo		6
в—Џ vector		6
в—Џ V/f		12
в—Џ note		Alternative control modes; drive control based on SINAMICS S120 CU320-2, firmware version V4.x
Communication
DRIVE-CLiQ Interfaces		4
General technical data
Fan		No fan
DC supply voltage
в—Џ rated value	V	24
в—Џ permissible range	V	20.4 ... 28.8
Consumed current typical	mA	300
в—Џ Note		with no load on inputs/outputs, no 24 V supply via DRIVE-CLiQ interface
Making current, typ.	A	1.6
Power loss [W] typical	W	7
Ambient temperature, during
в—Џ long-term storage	°C (°F)	-25 ... +55 (-13 ... +131)
в—Џ transport	°C (°F)	-40 ... +70 (-40 ... +158)
в—Џ operation	°C (°F)	0 ... 55 (32 ... 131)
вЂ” note		Maximum installation altitude 4000 m (13124 ft) above sea level. Above an altitude of 2000 m (6562 ft), the maximum ambient temperature decreases by 7 °C (12.6 °F) per 1000 m (3281 ft).
Relative humidity during operation	%	5 ... 95
Air pressure	hPa	620 ... 1 060
Degree of protection		IP20
Height	mm (in)	380 (14.96063)
Width	mm (in)	25 (0.98425)
Depth	mm (in)	270 (10.62992)
в—Џ Note		When the spacer is removed 230 mm (9.05 in) deep
Net weight	g (lb)	2 600 (5.73202)
Digital inputs
Number of digital inputs		6
DC input voltage
в—Џ rated value	V	24
в—Џ for signal "1"	V	15 ... 30
в—Џ for signal "0"	V	-3 ... +5
Electrical isolation		Yes
в—Џ note		Yes, in groups of 6
Current consumption for "1" signal level, typ.	mA	3.5
Input delay time for
в—Џ signal "0" в†’ "1", typ.	µs	50
в—Џ signal "1" в†’ "0", typ.	µs	150
Digital inputs/outputs
Number of digital I/Os		4
Parameterization possibility of the digital I/Os		parameterizable as DI, as DO, as probe input (max. 4)
If used as an input
DC input voltage
в—Џ rated value	V	24
в—Џ for signal "1"	V	15 ... 30
в—Џ for signal "0"	V	-3 ... +5
Electrical isolation		No
Current consumption for "1" signal level, typ.	mA	3.5
Input delay time for
в—Џ signal "0" в†’ "1", typ.	µs	5
в—Џ signal "1" в†’ "0", typ.	µs	50
Measuring input reproducibility	µs	5
Measuring input resolution	µs	1
If used as an output
Load voltage
в—Џ rated value	V	24
в—Џ permissible range	V	20.4 ... 28.8
Electrical isolation		No
Current carrying capacity for each output, max.	mA	500
Leakage current, max.	mA	2
Output delay for
в—Џ signal "0" в†’ "1", typ.	µs	150
в—Џ signal "0" в†’ "1", max.	µs	400
в—Џ signal "1" в†’ "0", typ.	µs	75
в—Џ signal "1" в†’ "0", max.	µs	100
вЂ” note		Data for Vcc = 24 V; load 48 Ohm; "1" = 90 % VOut, "0" = 10 % VOut
Switching frequency of the outputs for
в—Џ resistive load, max.	Hz	4 000
в—Џ inductive load, max.	Hz	2
в—Џ lamp load, max.	Hz	11
Short-circuit protection		Yes
Additional technical data
Back-up of non-volatile data of retentive data		unlimited buffer duration
Approvals
в—Џ USA		cULus
в—Џ Canada		cULus
в—Џ Australia		RCM (formerly C-Tick)
в—Џ Korea		KCC
в—Џ Russia, Belarus and Kazakhstan		EAC