For satisfactory and reliable operation of the drive, original components of the SINAMICS system and the original Siemens accessories as described in Catalog D 31 and the Configuration Manuals, in the functional descriptions or user manuals should be used.

The user must observe the configuring instructions.

Combinations that differ from the configuring instructions (also in conjunction with non-Siemens products) require a special agreement.

If non-original components are used, for example, even in the case of a repair, approvals such as UL, EN and Safety Integrated may become invalid. This may also result in the operating authorization for the machine in which the non-Siemens components are installed becoming invalid.

All of the approvals, certificates, declarations of conformity, test certificates, e.g. CE, UL, Safety Integrated, have been performed with the associated system components as they are described in the Catalogs and Configuration Manuals. The certificates are only valid if the products are used with the described system components, are installed according to the Installation Guidelines and are used for their intended purpose. In other cases, the vendor of these products is responsible for arranging that new certificates are issued.

Note:

The products described in Catalog D 31 may cause high-frequency disturbances in a residential environment and necessitate the implementation of interference-suppression measures.