|
| | | | |
Motors: | AN.K / MLFB: 1PS1 |
|---|
Shaft heights: | 355, 400, 450, 500, 560 | Power range: | 90 kW - 2100 kW | Number of poles: | 2 - 16 poles,
higher pole numbers on request | Voltage range: | 380 V - 950 V | Rated voltage: | 380 V / 400 V / 415 V / 500 V / 660 V / 690 V | Frequency converter: | Line and converter operation | Degree of protection: | IP55, IP56, IP65, IP67 | Cooling type: | IC 411, IC 416, IC 71W | Type of construction: | IM B3, IM B35, IM V1 | Enclosure: | Welded steel | Bearings: | Roller bearings, sleeve bearings | Standards: | IEC, EN, DIN, VDE | Explosion protection: | II3G Ex nA II T3 | Type of protection:
without explosion protection | N.A. | Noise level: | max. 85 dB(A) (load, 50 Hz), lower noise versions are available |
Features- Also available for exceptional requirements such as dust explosion protection.
- Corrosion protection using special paint finishes according to the manufacturer's standard or customer's specification.
- The motors are available as special version for polar regions down to -40 °C (without pre-heating of the motor) or desert regions up to +60 °C.
- When required, vertical motors can also be equipped with thrust bearings for high axial and radial loads.
- Wide range of connection systems for large cable cross-sections, high short-circuit strength or phase-segregated version.
- Optimized starting and operating parameters and high efficiency by using copper bar rotors as standard.
- With water jacket cooling IC 71W up to 60 % higher power density - compact and low noise. Admirably suited for converter operation with constant load torque.
|
|
