The SINAMICS G110D distributed inverters are compact frequency inverters for standard drives. Each SINAMICS G110D includes both the Control Unit as well as the Power Module in one unit.

SINAMICS G110D with integrated maintenance switch and manual local control with keyswitch

SINAMICS G110D features an integrated brake chopper and is suitable for distributed drives without energy recovery capability. If generator energy is produced then this is dissipated in the externally connected braking resistors. The communication is realized via the local inputs (digital and analog) or via the AS-Interface bus integrated as standard.

SINAMICS G110D with integrated maintenance switch

The inverter is available in two versions: With and without maintenance switch. Thanks to the optional maintenance switch (this cannot be retrofitted), when service is required, the inverter can be simply disconnected from the line supply without having to have any additional components or additional wiring costs when configuring.

Accessories

Braking resistors

Excess energy in the DC link is dissipated in the braking resistors. The braking resistors are designed for use with the SINAMICS G110D. This has an integrated brake chopper (electronic switch).

Intelligent Operator Panel IOP‑2 Handheld

User-friendly and powerful operator panel for commissioning and diagnostics as well as local operator control and monitoring of SINAMICS G110D.

Manual local control with keyswitch

Master control can be toggled between automatic mode (PLC) and manual local mode using the manual local control. This can also be used to switch off the inverter. Additional functions include switching over between continuous and jog mode, starting the motor including direction of rotation and deactivating the Quick Stop in the manual mode.

Memory card

The parameter settings for an inverter can be stored on the SINAMICS SD memory card. When service is required, e.g. after the inverter has been replaced and the data have been downloaded from the memory card, the drive system is immediately ready for use again. The associated memory card holder is not included in the scope of supply of the inverter and must be separately ordered.

Card holder for memory card

To use the SINAMICS SD memory card, a card holder is required that is inserted under the blanking cover or under the manual/automatic control operator panel on the inverter.

RS232 interface cable for communication with a PC

For controlling and commissioning an inverter directly from a PC if the appropriate software (STARTER commissioning tool V4.1.3 and higher) has been installed.

USB interface cable for communication with a PC

For controlling and commissioning an inverter directly from a PC if the appropriate software (STARTER commissioning tool V4.1.3 and higher) has been installed.

Adapter for mounting the SINAMICS G110D instead of a SIRIUS M200D motor starter

Connection board kit to mount a SINAMICS G110D inverter on the connection holes of the SIRIUS M200D motor starter (assuming that there is enough space).

Connector kit for braking resistor

Connector kit for using or connecting different braking resistors.

UL connector kit

Special UL connector kit for UL-compatible applications.

Protection bar

Protection bar for protecting the connector against shearing due to mechanical stress

Connecting cable

Connector sets to connect to the line supply and the outgoing motor feeder are available as accessories as well as pre-assembled motor cables for connection to the motor.

Flexible plug-in cables to transfer data between AS-Interface participants as well as to supply the Control Unit and the Power Module with power.

Spare Parts Kit

A Spare Parts Kit is available which comprises small parts such as seals, caps and screws.

Replacement fan

A replacement fan is available, which comprises a pre-mounted unit with cover, fan and screws.