Basic Operator Panel (BOP)

The BOP can be used to make individual parameter settings.

Values and units are displayed via a 5-digit display.

One BOP can be used for several inverters. It is plugged directly into the inverter.

The BOP provides a function for time-saving copying of parameters. A parameter set of one inverter can be saved and then loaded to another inverter.

PC inverter connection kit

For controlling and commissioning an inverter directly from a PC if the appropriate software (STARTER commissioning tool ¹⁾) has been installed.

Isolated RS232 adapter module for a reliable point-to-point connection to a PC.

The scope of supply includes a 9-pin SUB-D connector and an RS232 standard cable (3 m (9.84 ft)).

STARTER commissioning tool

STARTER is a commissioning tool with a graphic user interface for commissioning SINAMICS G110 inverters in Windows NT/2000/XP Professional and Windows 7. It can be used to read, change, store, enter, and print parameter lists.

Selection and ordering data

Accessories

The options listed here are suitable for all SINAMICS G110 inverters.

¹⁾ The STARTER commissioning tool is also available on the internet at http://support.automation.siemens.com/WW/view/en/10804985/133100

Documentation

A Getting Started Guide is supplied in hard copy for the Controlled Power Modules. The operating instructions and parameter list can be downloaded free of charge from the Internet at:
http://support.automation.siemens.com/WW/view/en/13740464/133300