Mains voltage and power ranges

380 V to 480 V 3 AC  ±10 %

7.5 kW to 250 kW (variable torque)

Power frequency

47 Hz to 63 Hz

Output frequency

for inverter 7.5 kW to 90 kW

0 ... 650 Hz, (limitation to 550 Hz in production to comply with legal requirements) ¹⁾

for inverter 110 kW to 250 kW

0 Hz to 267 Hz

Power factor

≥ 0.95

Inverter efficiency

for inverter 7.5 kW to 90 kW

96 % to 97 %

for inverter 110 kW to 250 kW

97 % to 98 %

(Further information is available on the Internet at:
http://support.automation.siemens.com/WW/view/en/22978972)

Overload capability

for inverter 7.5 kW to 90 kW

Overload current 1.4 x rated output current (i.e. 140 % overload capability) for 3 s and 1.1 x rated output current (i.e. 110 % overload capability) for 60 s, cycle time 300 s

for inverter 110 kW to 250 kW

Overload current 1.5 x rated output current (i.e. 150 % overload capability) for 1 s and 1.1 x rated output current (i.e. 110 % overload capability) for 60 s, cycle time 300 s

Inrush current

less than rated input current

Control method

linear V/f characteristic; quadratic V/f characteristic; multipoint characteristic (programmable V/f characteristic); flux current control (FCC); energy saving mode

Pulse frequency

for inverter 7.5 kW to 90 kW

4 kHz (standard)
2 kHz to 16 kHz (in 2-kHz-steps)

for inverter 110 kW to 250 kW

2 kHz (standard)
2 kHz to 4 kHz (in 2-kHz-steps)

Fixed frequencies

15, programmable

Skip frequency ranges

4, programmable

Setpoint resolution

0.01 Hz digital
0.01 Hz serial
10 bit analog

Digital inputs

6 fully programmable isolated digital inputs; switchable PNP/NPN

Analog inputs

2 programmable analog inputs

• 0 V to 10 V, 0 mA to 20 mA and –10 V to +10 V (AIN1)
• 0 V to 10 V and 0 mA to 20 mA (AIN2)
• both can be used as 7th/8th digital input

Relay outputs

3, programmable
30 V DC/5 A (resistive load),
250 V AC/2 A (inductive load)

Analog outputs

2, programmable (0/4 mA to 20 mA)

Serial interfaces

RS-485, option RS-232

Motor cable length

for inverter 7.5 kW to 90 kW

Without output choke

max. 50 m (shielded)
max. 100 m (unshielded)

With output choke

See variant dependent options

for inverter 110 kW to 250 kW

Without output choke

max. 200 m (shielded)
max. 300 m (unshielded)

With output choke

See variant dependent options

Electromagnetic compatibility

for inverter 7.5 kW to 90 kW

Inverter with internal filter Class A available

for inverter without filter

7.5 kW to 15 kW

EMC filter Class B to EN 55 011 available as an option

18.5 kW to 90 kW

EMC filter Class B from Schaffner available as an option

110 kW to 250 kW

EMC filter Class A available as an option

Braking

DC braking, compound braking

Degree of protection

IP20

Operating temperature range

for inverter 7.5 kW to 90 kW

-10 °C to +40 °C (+14 °F to +104 °F)

for inverter 110 kW to 250 kW

0 °C to +40 °C (+32 °F to +104 °F)

Storage temperature

-40 °C to +70 °C (-40 °F to +158 °F)

Relative humidity

95 % (non-condensing)

Installation altitude

for inverter 7.5 kW to 90 kW

up to 1000 m above sea level without derating

for inverter 110 kW to 250 kW

up to 2000 m above sea level without derating

Standard SCCR
(Short Circuit Current Rating) ²⁾

FSC: 100 kA
FSD, FSE, FSF, FSFX, FSGX: 65 kA

Protection features for

undervoltage, overvoltage, overload, earth faults, short-circuits, stall prevention, locked motor protection, motor overtemperature, inverter overtemperature, parameter change protection

Conformity with standards

for inverter 7.5 kW to 90 kW

 U_L, cU_L, CE, c-tick

for inverter 110 kW to 250 kW

U_L available soon, cU_L available soon, CE

CE marking

Conformity with low-voltage directive 73/23/EEC

Cooling-air volumetric flow required, dimensions and weights (without options)

Frame size (FS)

Cooling-air volumetric flow required (l/s)/(CFM)

H x W x D (mm)

Weight, approx. (kg)

C

54.9/116.3

245 x 185 x 195

5.7

D

2 x 54.9/2 x 116.3

520 x 275 x 245

17

E

2 x 54.9/2 x 116.3

650 x 275 x 245

22

F without filter

150/317.79

850 x 350 x 320

56

F with filter

150/317.79

1150 x 350 x 320

75

FX

225/478.13

1400 x 326 x 356

116

GX

440/935

1533 x 326 x 545

174

CFM:
Cubic Feet per Minute

kW

2 kHz

4 kHz

6 kHz

8 kHz

10 kHz

12 kHz

14 kHz

16 kHz

7.5

19.0

19.0

17.1

15.2

13.3

11.4

9.5

7.6

11.0

26.0

26.0

24.7

23.4

20.8

18.2

15.6

13.0

15.0

32.0

32.0

28.8

25.6

22.4

19.2

16.0

12.8

18.5

38.0

38.0

36.1

34.2

30.4

26.6

22.8

19.0

22

45.0

45.0

40.5

36.0

31.5

27.0

22.5

18.0

30

62.0

62.0

55.8

49.6

43.4

37.2

31.0

24.8

37

75.0

75.0

71.3

67.5

60.0

52.5

45.0

37.5

45

90.0

90.0

81.0

72.0

63.0

54.0

45.0

36.0

55

110.0

110.0

93.5

77.0

63.3

49.5

41.3

33.0

75

145.0

145.0

123.3

101.5

83.4

65.3

54.4

43.5

90

178.0

178.0

138.0

97.9

84.6

71.2

62.3

53.4

110

205.0

180.4

-

-

-

-

-

-

132

250.0

220.0

-

-

-

-

-

-

160

302.0

265.8

-

-

-

-

-

-

200

370.0

325.6

-

-

-

-

-

-

250

477.0

419.8

-

-

-

-

-

-

First environment
(residential, commercial)

Category C1
Unfiltered devices plus external Class B filter with low leakage currents

Category C2
Devices with an integrated Class B filter
or devices with an integrated Class A filter plus external supplementary filter Class B
or devices with an integrated Class A filter plus warning information
or unfiltered devices plus external Class A filter plus warning information

Second environment
(industrial)

Category C2
Devices with an integrated Class B filter
or devices with an integrated Class A filter plus external supplementary filter Class B
or devices with an integrated Class A filter
or unfiltered devices plus external Class A filter
Note:
The requirements of EN 61 800-3 are considerably exceeded if Class B filters are used.

Category C3
Devices with integrated Class A filter
or unfiltered devices plus external Class A filter
Warning information is necessary.
Note:
The requirements of EN 61 800-3 are considerably exceeded if Class A filters are used.

Category C4
Unfiltered devices plus external Class A filter
An EMC plan must be drawn up.
Note:
The requirements of EN 61 800-3 are considerably exceeded if Class A filters are used.

Emitted interference
EN 61 800-3

Conducted via mains cable

150 kHz to 30 MHz

Unfiltered devices, not tested.
All devices with an internal/external filter:
Depending on the type of filter and on the envisaged PDS installation:
Category C1:
Limit value complies with EN 55 011, Class B
Category C2:
Limit value complies with EN 55 011, Class A, Group 1.
In addition, all devices with an internal/external filter comply with the limit value for category C3 installations.
Limit value complies with EN 55 011, Class A, Group 2.

Emitted by the drive

30 MHz to 1 GHz

All devices.
Limit value complies with EN 55 011, Class A, Group 1.

ESD immunity
EN 61 000-4-2

ESD through air discharge

Test severity level 3

8 kV

ESD through contact discharge

Test severity level 3

6 kV

Immunity to electrical fields
EN 61 000-4-3

Electrical field applied to unit

Test severity level 3

80 MHz to 1 GHz

10 V/m

Immunity to burst interference
EN 61 000-4-4

Applied to all cable terminations

Test severity level 4

4 kV

Surge immunity
EN 61 000-4-5

Applied to mains cables

Test severity level 3

2 kV

Immunity to RFI emissions, conducted
EN 61 000-4-6

Applied to mains, motor and control cables

Test severity level 3
0.15 MHz to 80 MHz
80 % AM (1 kHz)

10 V