The 3SF1 safety switches with safety-oriented communication can be directly connected using the AS-Interface bus system. The safety functions no longer have to be conventionally wired up.

With the 3SF1 safety switches the ASIsafe electronics are integrated in the switch enclosure.

3SF1 safety switches with separate actuator have the same enclosures as the 3SF1 position switches.

Actuation

The actuator head is included in the scope of supply. For actuation from four directions it can be adjusted through 4 Г— 90°. The switches can also be approached from above.

The actuators are not included in the scope of supply of the safety switch and must be ordered separately from a choice of different versions to suit the application.

The actuator is encoded. Simple overruling by hand or auxiliary devices is impossible.

A high-grade steel blocking insert for attaching up to eight padlocks is available for even more safety.

A rubber cap to protect the actuator head from contamination is available for operation in dusty environments.

Display

The 3SF1 switches have a status display with three LEDs:

LED 1 (yellow): F-IN1

LED 2 (yellow): F-IN2

LED 3 (green/red): AS-i/FAULT

Connection

Connection to the AS-Interface is by means of a 4-pole M12 connector socket (plastic version) connected to the yellow AS-Interface bus cable.

The wide enclosures (50 or 56 mm) also have an M12 socket for connecting a second safety switch. Category 4 according to ISO 13849-1 is thus achieved.