SM 336 F analog input modules - Safety Integrated . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SM 336 F analog input modules

| | | | | | |

Article number		6ES7336-4GE00-0AB0
		SM 336, F.AI 6 X 0/4 ... 20MA HART
Supply voltage
Rated value (DC)		24 V
Reverse polarity protection		Yes
Input current
From power supply L+, typ.		150 mA
from backplane bus 5 V DC, max.		90 mA
Power loss
Power loss, typ.		4.5 W
Analog inputs
Number of analog inputs		6
permissible input current for current input (destruction limit), max.		40 mA
Input ranges
в—Џ Voltage		No
в—Џ Current		Yes
Input ranges (rated values), currents
в—Џ 0 to 20 mA		Yes
в—Џ Input resistance (0 to 20 mA)		150 в„¦; typ. 150 ohms max. 175 ohms
в—Џ 4 mA to 20 mA		Yes
в—Џ Input resistance (4 mA to 20 mA)		150 в„¦; typ. 150 ohms max. 175 ohms
Cable length
в—Џ shielded, max.		1 000 m
Analog value generation for the inputs
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.		16 bit; 15 bit + sign
в—Џ Integration time (ms)		20 ms @ 50 Hz, 16.7 ms @ 60 Hz
в—Џ Interference voltage suppression for interference frequency f1 in Hz		f=n x (f1 ±0.5 %)
Encoder
Connection of signal encoders
в—Џ for current measurement as 2-wire transducer		Yes
в—Џ for current measurement as 4-wire transducer		Yes
Errors/accuracies
Operational error limit in overall temperature range
в—Џ Current, relative to input range, (+/-)		0.2 %; 40 µA
Basic error limit (operational limit at 25 °C)
в—Џ Current, relative to input range, (+/-)		0.1 %
Interrupts/diagnostics/status information
Diagnostic functions		Yes
Alarms
в—Џ Diagnostic alarm		Yes
Diagnostic messages
в—Џ Diagnostic information readable		Yes
Diagnostics indication LED
в—Џ Fail-safe operation		Yes
в—Џ Group error SF (red)		Yes
в—Џ Encoder supply Vs (green)		No
Potential separation
Potential separation analog inputs
в—Џ between the channels		Yes
в—Џ between the channels and backplane bus		Yes
в—Џ between the channels and the power supply of the electronics		Yes
Isolation
Isolation tested with		370V for 1 min
Standards, approvals, certificates
Highest safety class achievable in safety mode
в—Џ acc. to EN 954		4
в—Џ SIL acc. to IEC 61508		SIL 3
Connection method
required front connector		20-pin
Dimensions
Width		40 mm
Height		125 mm
Depth		120 mm
Weights
Weight, approx.		350 g