Overview

SIMOREG cabinet units can be assembled in a modular fashion using standardized open-loop control and function options. This allows them to be adapted to technological as well as to user-specific applications.

When ordering a SIMOREG cabinet unit with integrated circuit options, the Order No. of the associated unit must be supplemented with a “-Z“ and the appropriate Order Codes should be specified for the required options (several Order Codes can be specified in any sequence).

In addition to the options with codes, SIMOREG cabinet units can be equipped with additional options, e.g. drive converters can be connected in parallel to increase the output (max. 6), 12-pulse versions, the commutating reactors and/or switchgear can be adapted to the motor data, output smoothing reactors, adaptation to plants and systems with drive converter transformers, devices for field supply, different degrees of protection.

The Order No. must be supplemented with a “-Z“ and the required option specified in plain text.

Ordering example:

Drive converter cabinet for single-/two-quadrant operation, rated input voltage 3-ph. 500 V 50 Hz, rated input current 663 A, PTC thermistor evaluation for alarm and fault, anti-condensation heating, output smoothing reactors, degree of protection IP23.

When ordering, specify:

6RM7087-6GS02-0-Z

A12 + E22

Degree of protection IP23

Output smoothing reactor

I_th = 780 A

L₀₁ = 0.4 mH at I₁ = 370 A

L₀₂ = 0.2 mH at I₂ = 800 A

Certain circuit options require additional equipment (e.g. temperature sensor, motor fan, motor brake, motor anticondensation heating, horn, pushbutton, etc.). These are not part of the scope of the supply of the cabinet unit. External devices can be connected to the terminal strip in the SIMOREG cabinet unit. Display and operator control elements which are internally required (e.g. pushbutton, signaling lamps, measuring instruments), are mounted in the door of the SIMOREG cabinet unit.