| | |

6XV1822-5BE30

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

Заказной номер	Вес	PG	Описание продукта	Цена
6XV1822-5BE30	0.14	5K1	SIMATIC NET, 7/8 ПРИСОЕДИНИТЕЛЬНЫЙ КАБЕЛЬ ДЛЯ ПИТАНИЯ ET200, СОБРАННЫЙ КАБЕЛЬ С ДВУМЯ 7/8 ШТЕККЕРАМИ, 5-PIN, 0.3 M	По запросу

п»ї

For SINAMICSВ G120D distributed frequency inverters, the following supplementary system components are always required or are available depending on the intended application.

Description	Order
Intelligent Operator Panel IOPвЂ‘2 Handheld ¹⁾	Application-dependent
RS232 connecting cable ¹⁾	Application-dependent
Memory cards	Application-dependent
PC inverter connection kit 2 (mini USB interface cable for communication with a PC)	Application-dependent
STARTER commissioning tool	Application-dependent
SINAMICS Startdrive commissioning tool	Application-dependent
Connecting cables for the Control Unit	В
PROFINET connecting cable	Application-dependent
PROFIBUS connecting cable	Application-dependent
Connecting cables/connectors for supplying the Control Unit with 24 V DC power	Always required
Connecting cables and connectors for digital inputs and outputs	Application-dependent
Connecting cables and connectors for encoders and analog inputs	Application-dependent
Connecting cables for Power Modules	В
Connecting cables pre-assembled at one end and connector sets to connect to the line supply	Always required
Motor cables pre-assembled at one end and connector sets to connect the Power Module to the motor	Always required
Power bus distribution 400В V in IP65 degree of protection	Application-dependent

¹⁾ For use of the IOPвЂ‘2 Handheld in combination with SINAMICSВ G110D, SINAMICSВ G120D, SINAMICSВ G110M and SIMATICВ ETВ 200proВ FCвЂ‘2, the RS232 connecting cable with optical interface is required (Article No.: 3RK1922вЂ‘2BP00). The cable must be ordered separately.

Intelligent Operator Panel IOPвЂ‘2 Handheld

IOPвЂ‘2 Handheld for mobile use

The Intelligent Operator Panel IOPвЂ‘2 Handheld is a very user-friendly and powerful operator panel for commissioning and diagnostics as well as local operator control and monitoring of SINAMICSВ G110D, SINAMICSВ G120D, SINAMICSВ G110M and SIMATICВ ETВ 200proВ FCвЂ‘2 distributed inverters.

The IOPвЂ‘2 Handheld supports both newcomers and drive experts. Thanks to the membrane keyboard with a central sensor control field, the high-contrast color displays, the menu-based operation and the application wizards, it is easy to commission standard drives. A drive can be essentially commissioned without having to use a printed parameter list вЂ“ as the parameters are displayed in plain text, and explanatory help texts and a parameter filtering function are provided.

Application wizards interactively guide you when commissioning important applications such as conveyor technology, pumps, fans and compressors. There is a basic commissioning wizard for general commissioning.

Up to two process values can be graphically visualized and up to four process values can be numerically visualized on the status screen/display. Process values can also be displayed in technological units.

The IOPвЂ‘2 Handheld supports standard commissioning of identical drives. For this purpose, a parameter list can be copied from an inverter into the IOPвЂ‘2 Handheld and downloaded into other drive units of the same type as required.

In addition to the IOPвЂ‘2, the IOPвЂ‘2 Handheld includes a housing with rechargeable batteries, a charging unit, an RS232 connecting cable, and a USB cable. The charging unit is supplied with connector adapters for Europe, the US and UK. When the batteries are fully charged, the operating time is up to 10В hours.

To connect the IOPвЂ‘2 Handheld to SINAMICSВ G110D, SINAMICSВ G120D, SINAMICSВ G110M and SIMATICВ ETВ 200proВ FCвЂ‘2, the RS232 connecting cable with optical interface is required in addition.

Updating the IOPвЂ‘2 Handheld

The IOPвЂ‘2 Handheld can be updated and expanded using the integrated USB interface.

Data to support future drive systems can be transferred from the PC to the IOPвЂ‘2 Handheld. Further, the USB interface allows user languages and wizards that will become available in the future to be subsequently downloaded and the firmware to be updated for the IOPвЂ‘2 Handheld ¹⁾.

¹⁾ Information on updates for the IOPвЂ‘2 Handheld is available at
https://support.industry.siemens.com/cs/document/67273266

Selection and ordering data

Description

Article No.

IOPвЂ‘2 Handheld

For use with
SINAMICSВ G120
SINAMICSВ G120C
SINAMICSВ G120P
SINAMICSВ G110D
SINAMICSВ G120D
SINAMICSВ G110M
SIMATICВ ETВ 200proВ FCвЂ‘2

Included in the scope of delivery:

IOPвЂ‘2
Handheld housing
Rechargeable batteries (4В Г—В AA)
Charging unit (international)
RS232 connecting cable
3В m (9.84В ft) long,
can be used in combination with
SINAMICSВ G120
SINAMICSВ G120C
SINAMICSВ G120P
USB cable
1В m (3.28В ft) long

6SL3255-0AA00-4HA1

RS232 connecting cable

2.5В m (8.20В ft) long,
with optical interface for connecting the IOPвЂ‘2 Handheld to
SINAMICSВ G110D
SINAMICSВ G120D
SINAMICSВ G110M
SIMATICВ ETВ 200proВ FCвЂ‘2

3RK1922-2BP00

Technical specifications

В	IOPвЂ‘2 Handheld 6SL3255-0AA00-4HA1
Display	High-contrast color display, a variety of display options
Resolution	320В Г—В 240В pixels
Operator panel	Membrane keyboard with central sensor control field
Operating languages	English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Russian, Czech, Polish, Turkish, Chinese Simplified
Ambient temperature	В
During transport and storage	-20В ...В +55В В°C (-4В ...В +131В В°F)
During operation	0В ...В 40В В°C (32В ...В 104В В°F)
Humidity	Relative humidity < 95В %, non-condensing
Degree of protection	IP20
Dimensions (HВ Г—В WВ Г—В D)	195.04В Г—В 70В Г—В 37.58В mm (7.68В Г—В 2.76В Г—В 1.48В in)
Weight, approx.	0.724В kg (1.6В lb)
Compliance with standards	CE, RCM, cULus, EAC, KCC-REM-S49-SINAMICS

Memory cards

SINAMICS SD memory card

The parameter settings for an inverter can be stored on the SINAMICS SD memory card. When service is required, e.g. after the inverter has been replaced and the data have been downloaded from the memory card, the drive system is immediately ready for use again.

Parameter settings can be written from the memory card to the inverter or saved from the inverter to the memory card.
Up to 100В parameter sets can be stored.
The memory card supports standard commissioning without the use of the Intelligent Operator Panel IOPвЂ‘2 Handheld or the STARTER and SINAMICS Startdrive commissioning tools.
If firmware is stored on the memory card and a Control Unit is installed, the firmware can be upgraded/downgraded during power-up ¹⁾.

Note:

The memory card is optional, but it facilitates inverter replacement.

¹⁾ You can find more information about firmware upgrades/downgrades on the Internet atВ
https://support.industry.siemens.com/cs/document/67364620

Selection and ordering data

Description	В	Article No.
SINAMICSВ SD card 512В MB	В	6SL3054-4AG00-2AA0
Optional firmware memory cards
SINAMICS SD card 512В MB + firmware V4.7 SP3 (Multicard V4.7 SP3)	В	6SL3054-7TB00-2BA0
SINAMICS SD card 512В MB + firmware V4.7 SP6 (Multicard V4.7 SP6)	В	6SL3054-7TD00-2BA0
SINAMICSВ SD card В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В В 512В MB + firmware V4.7В SP9 (Multicard V4.7В SP9)	NEW	6SL3054-7TE00-2BA0

For an overview and more information on all available firmware versions, see https://support.industry.siemens.com/cs/document/67364620

PC inverter connection kit 2 (mini USB interface cable for communication with a PC)

For controlling and commissioning an inverter directly from a PC via a point-to-point connection if the appropriate software (STARTER commissioning tool ¹⁾, V4.3 and higher, or SINAMICS Startdrive) has been installed.

Selection and ordering data

Description

Article No.

PC inverter connection kit 2

USB cable (3 m/9.84 ft long) for

SINAMICSВ G120C
SINAMICSВ G120 Control Units
- CU230P-2
- CU240E-2
- CU250S-2
SINAMICSВ G110M Control Units
- CU240M
SINAMICSВ G120D Control Units
- CU240D-2
- CU250D-2

6SL3255-0AA00-2CA0

STARTER commissioning tool

The STARTER commissioning tool (V4.3 and higher) supports the commissioning and maintenance of SINAMICSВ G120D inverters. The operator guidance combined with comprehensive, user-friendly functions for the relevant drive solution allow you to commission the device quickly and easily.

Selection and ordering data

Description

Article No.

STARTER commissioning tool ¹⁾

on DVDвЂ‘ROM

6SL3072-0AA00-0AG0

¹⁾ The STARTER commissioning tool is also available on the Internet atВ http://www.siemens.com/starter

An overview of all available accessories (e.g. connectors and cables) can be found under the following link:В
http://www.siemens.com/distributeddrives-supplementaryproducts

SINAMICS Startdrive commissioning tool

The SINAMICS Startdrive commissioning tool (V13 and higher) supports the commissioning and maintenance of SINAMICSВ G120D inverters. SINAMICS Startdrive is part of the TIA Portal engineering platform. It supports the intuitive integration of SINAMICS drives in automation. The same operator control concept, the elimination of interfaces and a high degree of user-friendliness make it possible to quickly integrate SINAMICS into an automation process and start it up with the TIA Portal. The TIA Portal with SINAMICS Startdrive offers you a totally integrated engineering platform for the complete application from the project engineering phase through to commissioning and diagnostics.

Selection and ordering data

Description

Article No.

SINAMICS Startdrive commissioning tool ¹⁾

on DVDвЂ‘ROM

6SL3072-4DA02-0XG0

¹⁾ The SINAMICS Startdrive commissioning tool is also available on the Internet at https://support.industry.siemens.com/cs/document/68034568

An overview of all available accessories (e.g. connectors and cables) can be found under the following link:
http://www.siemens.com/distributeddrives-supplementaryproducts

Connecting cables for the Control Unit

PROFINET connecting cable

Flexible plug-in cables and plug-in connectors that can be assembled in the field for transmission of data (up to 100В Mbit/s) between Industrial Ethernet stations with IP65 degree of protection.

Selection and ordering data

Description	Article No.
IEВ connectingВ cable M12вЂ‘180/M12вЂ‘180 Pre-assembled IEВ FCВ TP trailing cable GPВ 2В xВ 2 PROFINET typeВ C with two 4-pole M12 plugs (4-pole, D-coded), IP65/IP67 degree of protection, UL, plug/plug connector (IN/OUT) Length:	В
0.3В m (0.98В ft)	6XV1870-8AE30
0.5В m (1.64В ft)	6XV1870-8AE50
1В m (3.28В ft)	6XV1870-8AH10
1.5В m (4.92В ft)	6XV1870-8AH15
2В m (6.56В ft)	6XV1870-8AH20
3В m (9.84 ft)	6XV1870-8AH30
5В m (16.41 ft)	6XV1870-8AH50
10В m (32.81 ft)	6XV1870-8AN10
15В m (49.22В ft)	6XV1870-8AN15
IEВ M12В PlugВ PRO For assembly in the field, M12 plug-in connector (D-coded), metal enclosure, UL, fast connection method, plug connector	В
1В unit	6GK1901-0DB20-6AA0
8В units	6GK1901-0DB20-6AA8
1В unit (angled)	3RK1902-2DA00
RJ45В PLUGВ PROВ connector For on-site assembly for CU240DвЂ‘2В PNвЂ‘FВ PP or CU250DвЂ‘2В PNвЂ‘FВ PP Control Unit, UL 1В package = 1В unit	В
1В unit	6GK1901-1BB10-6AA0
SIMATIC NET POF/PCF cables (fiberВ optic) For CU240DвЂ‘2В PNвЂ‘FВ FO and CU250DвЂ‘2В PNвЂ‘FВ FO Coded cables for assembly in the field (sold by the meter)	В
POF standard cable GP 980/1000 Minimum order quantity: 20В m (66В ft)	6XV1874-2A
POF trailing cable 980/1000 Minimum order quantity: 20В m (66В ft)	6XV1874-2B
PCF standard cable GP 200/230 With UL approval Minimum order quantity: 20В m (66В ft)	6XV1861-2D
PCF trailing cable 200/230 With UL approval Minimum order quantity: 20В m (66В ft)	6XV1861-2C
Connectors for fiber-optic cables POF/PCF plug-in connectors for assembly in the field	В
IE SC RJ POF PLUG PRO (1В unit)	6GK1900-0MB00-6AA0
IE SC RJ PCF PLUG PRO (1В unit)	6GK1900-0NB00-6AA0

PROFIBUS connecting cable

Flexible plug-in cables/connectors for transmission of data (up to 12В Mbit/s) from PROFIBUS stations.

Selection and ordering data

Description	Article No.
PROFIBUS M12 plug-in cable Pre-assembled with two 5-pole M12 plug/socket connectors, UL Length:	В
0.3В m (0.98В ft)	6XV1830-3DE30
0.5В m (1.64В ft)	6XV1830-3DE50
1В m (3.28В ft)	6XV1830-3DH10
1.5В m (4.92В ft)	6XV1830-3DH15
2В m (6.56В ft)	6XV1830-3DH20
3В m (9.84 ft)	6XV1830-3DH30
5В m (16.41 ft)	6XV1830-3DH50
10В m (32.81 ft)	6XV1830-3DN10
15В m (49.22В ft)	6XV1830-3DN15
PROFIBUS M12 connector 5-pole, B-coded, metal enclosure, 1В packageВ =В 5 units	В
Pin insert	6GK1905-0EA00
Female contact insert	6GK1905-0EB00

Connecting cables/connectors for supplying the Control Unit with 24 V DC power

Selection and ordering data

Description	Article No.
7/8" plug-in cable For power supply, pre-assembled with two 5-pole 7/8" plug/socket connectors, UL 5В Г—В 1.5В mm² Length:	В
0.3В m (0.98В ft)	6XV1822-5BE30
0.5В m (1.64В ft)	6XV1822-5BE50
1В m (3.28В ft)	6XV1822-5BH10
1.5В m (4.92В ft)	6XV1822-5BH15
2В m (6.56В ft)	6XV1822-5BH20
3В m (9.84 ft)	6XV1822-5BH30
5В m (16.41 ft)	6XV1822-5BH50
10В m (32.81 ft)	6XV1822-5BN10
15В m (49.22В ft)	6XV1822-5BN15
7/8" plug-in connector 5-pole, B-coded, plastic enclosure, 1В package =В 5В units	В
Pin insert (OUT)	6GK1905-0FA00
Female contact insert (IN)	6GK1905-0FB00
POWERВ PLUGВ PROВ plug-in connector For the CU2x0D-2 PN-F PP/FO 5-pole pushвЂ‘pull power-plug for on-site assembly 1В Pack = 1В unit	В
1В unit	6GK1907-0AB10-6AA0

Connecting cables and connectors for digital inputs and outputs

Selection and ordering data

Description	Article No.
M12 plug-in cable With PUR sheath, to connect digital sensors and actuators, pre-assembled at one end, angled, plug connector, 5-pole, 5В Г—В 0.34В mm², UL Length:	В
1.5В m (4.92В ft)	3RK1902-4HB15-5AA0
5В m (16.41 ft)	3RK1902-4HB50-5AA0
10В m (32.81 ft)	3RK1902-4HC01-5AA0
M12 connector For screw mounting, 5-pole screw-type connection max. 0.75В mm², A-coded, max. 4 A, UL, plug connector	В
Straight	3RK1902-4BA00-5AA0
Angled	3RK1902-4DA00-5AA0

Connecting cables and connectors for encoders and analog inputs

Selection and ordering data

Description	Ordering (see Solution Partner)
M12 cable connector 8-pole plug connector	В
Straight cable outlet	Ordered from and supplied by KnorrTec
Angled cable outlet	Ordered from and supplied by KnorrTec
M12 plug-in cable Pre-assembled at one end, straight, plug connector, 8-pole, 4В Г—В 2В Г—В AWG24, shielded, PUR gray, suitable for trailing cables, for HTL and SSI encoders Length:	В
1.5В m (4.92В ft)	Ordered from and supplied by KnorrTec
5В m (16.41 ft)	Ordered from and supplied by KnorrTec
10В m (32.81 ft)	Ordered from and supplied by KnorrTec
M12 plug-in cable Pre-assembled at both ends, 8-pole M12 male connector to 12-pole M23 socket, 4В Г—В 2В Г—В AWG24, shielded, PUR gray, suitable for trailing cables HTL plug-in cable SSI plug-in cable Length:	В
1.5В m (4.92В ft)	Ordered from and supplied by KnorrTec
5В m (16.41 ft)	Ordered from and supplied by KnorrTec
10В m (32.81 ft)	Ordered from and supplied by KnorrTec
T distribution piece To connect two analog inputs 8-pole M12 male connector to 2В Г—В 4-pole M12 socket, angled	Ordered from and supplied by KnorrTec

Connecting cables for Power Modules

Connecting cables pre-assembled at one end and connector sets to connect to the line supply

Selection and ordering data

Description	Article No.
Connecting cable pre-assembled at one end Power supply cable, open at one end, for HANВ Q4/2, angled, 4В Г—В 4В mm²	В
1.5В m (4.92 ft) long	3RK1911-0DB13
5В m (16.41 ft) long	3RK1911-0DB33
Connector set for the power supply HANВ Q4/2	В
2.5В mm²	3RK1911-2BE50
4В mm²	3RK1911-2BE10
6В mm²	3RK1911-2BE30

Motor cables pre-assembled at one end and connector sets to connect the Power Module to the motor

Selection and ordering data

Motor cables pre-assembled at one end For motors with brake and temperature sensor with HANВ Q8 connector, shielded	Article No. (HTG: supplied by Harting) (ZKT: supplied by KnorrTec)
Cross-section	4В Г—В 1.5В mm² 2В Г—В (2В Г—В 0.75В mm²)	4В Г—В 2.5В mm² 2В Г—В (2В Г—В 0.75В mm²)	4В Г—В 4В mm² 2В Г—В 1В mm² + 2В Г—В 1.5В mm²
1.5В m (4.92 ft) long	HTG: 61В 88В 201В 0288	HTG: 61В 88В 201В 0291	HTG: 61В 88В 201В 0303
В	ZKT: 70020501000150	ZKT: 70009601000150	ZKT: 70017001000150
3В m (9.84 ft) long	HTG: 61В 88В 201В 0289	HTG: 61В 88В 201В 0292	HTG: 61В 88В 201В 0304
В	ZKT: 70020501000300	ZKT: 70009601000300	ZKT: 70017001000300
5В m (16.41 ft) long	HTG: 61В 88В 201В 0290	HTG: 61В 88В 201В 0293	HTG: 61В 88В 201В 0305
В	ZKT: 70020501000500	ZKT: 70009601000500	ZKT: 70017001000500
10В m (32.81 ft) long	HTG: 61В 88В 201В 0299	HTG: 61В 88В 201В 0301	HTG: 61В 88В 201В 0306
В	ZKT: 70020501001000	ZKT: 70009601001000	ZKT: 70017001001000
Connector set for motor cable HANВ Q8, shielded	В
В	HTG: 61В 83В 401В 0131	HTG: 61В 83В 401В 0132	HTG: 61В 83В 401В 0133
В	ZKT: 10032001	ZKT: 10032011	ZKT: 10032021

Power bus distribution 400В V in IP65 degree of protection

Selection and ordering data

Description	Ordering (see Solution Partner)
Power T clamp connector for 2.5В ...В 6В mm² With attached 7-pole connector, female contact insert, grommet housing, UL Seals for various cable cross-sections must be ordered separately	Ordered from and supplied by Harting
T clamp connector Completely pre-assembled	Ordered from and supplied by KnorrTec
T distributor box, IDC connection power cable Pre-assembled, UL, uncut power cable, 2.5 ... 6В mm² Push-in connection: 1.5В ...В 6В mm² Seals for various cable cross-sections must be ordered separately	Ordered from and supplied by WeidmГјller
Y distributor For direct connection of 400В V supply line, HAN Q4/2, conductor cross-section 1.5В ...В 4В mm²	Ordered from and supplied by Harting