Siemens
ÑÐÅÄÑÒÂÀ ÏÐÎÌÛØËÅÍÍÎÉ ÀÂÒÎÌÀÒÈÇÀÖÈÈ
îôèöèàëüíûé ïàðòíåð Ñèìåíñ
Êàòàëîã ÑÀ01 2018
(4872) 700-366
skenergo@mail.ru

6GK1905-0FA00

Öåíà íà ñàéòå óêàçàíà ðîçíè÷íàÿ â ÅÂÐÎ áåç ó÷åòà ÍÄÑ.
Äëÿ óòî÷íåíèÿ öåíû è ðàçìåðà ïðåäîñòàâëÿåìîé ñêèäêè - çâîíèòå èëè ïðèñûëàéòå çàÿâêè

Çàêàçíîé íîìåðÂåñPGÎïèñàíèå ïðîäóêòàÖåíà
6GK1905-0FA000.265K2SIMATIC NET, ÑÎÅÄÈÍÈÒÅËÜ 7/8' ÄËß ÅÒ200ÅÑÎ: ÑÎÅÄÈÍÈÒÅËÜ Ñ ØÒÅÊÅÐÀÌÈ, ÎÑÅÂÎÉ ÎÒÂÎÄ ÊÀÁÅËß, ÓÏÀÊÎÂÊÀ ÈÇ 5 ØÒÓÊÏî çàïðîñó



For SINAMICS G120D distributed frequency inverters, the following supplementary system components are always required or are available depending on the intended application.

Description

Order

Intelligent Operator Panel IOP‑2 Handheld 1)

Application-dependent

  • RS232 connecting cable 1)

Application-dependent

Memory cards

Application-dependent

PC inverter connection kit 2

(mini USB interface cable for communication with a PC)

Application-dependent

STARTER commissioning tool

Application-dependent

SINAMICS Startdrive commissioning tool

Application-dependent

Connecting cables for the Control Unit

 

  • PROFINET connecting cable

Application-dependent

  • PROFIBUS connecting cable

Application-dependent

  • Connecting cables/connectors for supplying the Control Unit with 24 V DC power

Always required

  • Connecting cables and connectors for digital inputs and outputs

Application-dependent

  • Connecting cables and connectors for encoders and analog inputs

Application-dependent

Connecting cables for Power Modules

 

  • Connecting cables pre-assembled at one end and connector sets to connect to the line supply

Always required

  • Motor cables pre-assembled at one end and connector sets to connect the Power Module to the motor

Always required

  • Power bus distribution 400 V in IP65 degree of protection

Application-dependent



1) For use of the IOP‑2 Handheld in combination with SINAMICS G110D, SINAMICS G120D, SINAMICS G110M and SIMATIC ET 200pro FC‑2, the RS232 connecting cable with optical interface is required (Article No.: 3RK1922‑2BP00). The cable must be ordered separately.

Intelligent Operator Panel IOP‑2 Handheld

IOP‑2 Handheld for mobile use

The Intelligent Operator Panel IOP‑2 Handheld is a very user-friendly and powerful operator panel for commissioning and diagnostics as well as local operator control and monitoring of SINAMICS G110D, SINAMICS G120D, SINAMICS G110M and SIMATIC ET 200pro FC‑2 distributed inverters.

The IOP‑2 Handheld supports both newcomers and drive experts. Thanks to the membrane keyboard with a central sensor control field, the high-contrast color displays, the menu-based operation and the application wizards, it is easy to commission standard drives. A drive can be essentially commissioned without having to use a printed parameter list – as the parameters are displayed in plain text, and explanatory help texts and a parameter filtering function are provided.

Application wizards interactively guide you when commissioning important applications such as conveyor technology, pumps, fans and compressors. There is a basic commissioning wizard for general commissioning.

Up to two process values can be graphically visualized and up to four process values can be numerically visualized on the status screen/display. Process values can also be displayed in technological units.

The IOP‑2 Handheld supports standard commissioning of identical drives. For this purpose, a parameter list can be copied from an inverter into the IOP‑2 Handheld and downloaded into other drive units of the same type as required.

In addition to the IOP‑2, the IOP‑2 Handheld includes a housing with rechargeable batteries, a charging unit, an RS232 connecting cable, and a USB cable. The charging unit is supplied with connector adapters for Europe, the US and UK. When the batteries are fully charged, the operating time is up to 10 hours.

To connect the IOP‑2 Handheld to SINAMICS G110D, SINAMICS G120D, SINAMICS G110M and SIMATIC ET 200pro FC‑2, the RS232 connecting cable with optical interface is required in addition.

Updating the IOP‑2 Handheld

The IOP‑2 Handheld can be updated and expanded using the integrated USB interface.

Data to support future drive systems can be transferred from the PC to the IOP‑2 Handheld. Further, the USB interface allows user languages and wizards that will become available in the future to be subsequently downloaded and the firmware to be updated for the IOP‑2 Handheld 1).

1) Information on updates for the IOP‑2 Handheld is available at
https://support.industry.siemens.com/cs/document/67273266

Selection and ordering data

Description

Article No.

IOP‑2 Handheld

For use with
SINAMICS G120
SINAMICS G120C
SINAMICS G120P
SINAMICS G110D
SINAMICS G120D
SINAMICS G110M
SIMATIC ET 200pro FC‑2

Included in the scope of delivery:

  • IOP‑2
  • Handheld housing
  • Rechargeable batteries (4 × AA)
  • Charging unit (international)
  • RS232 connecting cable
    3 m (9.84 ft) long,
    can be used in combination with
    SINAMICS G120
    SINAMICS G120C
    SINAMICS G120P
  • USB cable
    1 m (3.28 ft) long

6SL3255-0AA00-4HA1

RS232 connecting cable

2.5 m (8.20 ft) long,
with optical interface for connecting the IOP‑2 Handheld to
SINAMICS G110D
SINAMICS G120D
SINAMICS G110M
SIMATIC ET 200pro FC‑2

3RK1922-2BP00



Technical specifications

 

IOP‑2 Handheld
6SL3255-0AA00-4HA1

Display

High-contrast color display, a variety of display options

  • Resolution

320 × 240 pixels

Operator panel

Membrane keyboard with central sensor control field

Operating languages

English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Russian, Czech, Polish, Turkish, Chinese Simplified

Ambient temperature

 

  • During transport and storage

-20 ... +55 °C (-4 ... +131 °F)

  • During operation

0 ... 40 °C (32 ... 104 °F)

Humidity

Relative humidity < 95 %, non-condensing

Degree of protection

IP20

Dimensions (H × W × D)

195.04 × 70 × 37.58 mm (7.68 × 2.76 × 1.48 in)

Weight, approx.

0.724 kg (1.6 lb)

Compliance with standards

CE, RCM, cULus, EAC, KCC-REM-S49-SINAMICS



Memory cards

SINAMICS SD memory card

The parameter settings for an inverter can be stored on the SINAMICS SD memory card. When service is required, e.g. after the inverter has been replaced and the data have been downloaded from the memory card, the drive system is immediately ready for use again.

  • Parameter settings can be written from the memory card to the inverter or saved from the inverter to the memory card.
  • Up to 100 parameter sets can be stored.
  • The memory card supports standard commissioning without the use of the Intelligent Operator Panel IOP‑2 Handheld or the STARTER and SINAMICS Startdrive commissioning tools.
  • If firmware is stored on the memory card and a Control Unit is installed, the firmware can be upgraded/downgraded during power-up 1).

Note:

The memory card is optional, but it facilitates inverter replacement.

1) You can find more information about firmware upgrades/downgrades on the Internet at 
https://support.industry.siemens.com/cs/document/67364620

Selection and ordering data

Description

 

Article No.

SINAMICS SD card
512 MB

 

6SL3054-4AG00-2AA0

Optional firmware memory cards

SINAMICS SD card
512 MB + firmware V4.7 SP3

(Multicard V4.7 SP3)

 

6SL3054-7TB00-2BA0

SINAMICS SD card
512 MB + firmware V4.7 SP6

(Multicard V4.7 SP6)

 

6SL3054-7TD00-2BA0

SINAMICS SD card                                                                        
512 MB + firmware V4.7 SP9

(Multicard V4.7 SP9)

NEW

6SL3054-7TE00-2BA0



For an overview and more information on all available firmware versions, see https://support.industry.siemens.com/cs/document/67364620

PC inverter connection kit 2 (mini USB interface cable for communication with a PC)

For controlling and commissioning an inverter directly from a PC via a point-to-point connection if the appropriate software (STARTER commissioning tool 1), V4.3 and higher, or SINAMICS Startdrive) has been installed.

Selection and ordering data

Description

Article No.

PC inverter connection kit 2

USB cable (3 m/9.84 ft long) for

  • SINAMICS G120C
  • SINAMICS G120 Control Units
    • CU230P-2
    • CU240E-2
    • CU250S-2
  • SINAMICS G110M Control Units
    • CU240M
  • SINAMICS G120D Control Units
    • CU240D-2
    • CU250D-2

6SL3255-0AA00-2CA0



STARTER commissioning tool

The STARTER commissioning tool (V4.3 and higher) supports the commissioning and maintenance of SINAMICS G120D inverters. The operator guidance combined with comprehensive, user-friendly functions for the relevant drive solution allow you to commission the device quickly and easily.

Selection and ordering data

Description

Article No.

STARTER commissioning tool 1)

on DVD‑ROM

6SL3072-0AA00-0AG0



1) The STARTER commissioning tool is also available on the Internet at http://www.siemens.com/starter

An overview of all available accessories (e.g. connectors and cables) can be found under the following link: 
http://www.siemens.com/distributeddrives-supplementaryproducts

SINAMICS Startdrive commissioning tool

The SINAMICS Startdrive commissioning tool (V13 and higher) supports the commissioning and maintenance of SINAMICS G120D inverters. SINAMICS Startdrive is part of the TIA Portal engineering platform. It supports the intuitive integration of SINAMICS drives in automation. The same operator control concept, the elimination of interfaces and a high degree of user-friendliness make it possible to quickly integrate SINAMICS into an automation process and start it up with the TIA Portal. The TIA Portal with SINAMICS Startdrive offers you a totally integrated engineering platform for the complete application from the project engineering phase through to commissioning and diagnostics.

Selection and ordering data

Description

Article No.

SINAMICS Startdrive commissioning tool 1)

on DVD‑ROM

6SL3072-4DA02-0XG0



1) The SINAMICS Startdrive commissioning tool is also available on the Internet at https://support.industry.siemens.com/cs/document/68034568

 

An overview of all available accessories (e.g. connectors and cables) can be found under the following link:
http://www.siemens.com/distributeddrives-supplementaryproducts

Connecting cables for the Control Unit
PROFINET connecting cable

Flexible plug-in cables and plug-in connectors that can be assembled in the field for transmission of data (up to 100 Mbit/s) between Industrial Ethernet stations with IP65 degree of protection.

Selection and ordering data

Description

Article No.

IE connecting cable M12‑180/M12‑180

Pre-assembled IE FC TP trailing cable GP 2 x 2 PROFINET type C with two 4-pole M12 plugs (4-pole, D-coded), IP65/IP67 degree of protection, UL, plug/plug connector (IN/OUT)
Length:

 

  • 0.3 m (0.98 ft)

6XV1870-8AE30

  • 0.5 m (1.64 ft)

6XV1870-8AE50

  • 1 m (3.28 ft)

6XV1870-8AH10

  • 1.5 m (4.92 ft)

6XV1870-8AH15

  • 2 m (6.56 ft)

6XV1870-8AH20

  • 3 m (9.84 ft)

6XV1870-8AH30

  • 5 m (16.41 ft)

6XV1870-8AH50

  • 10 m (32.81 ft)

6XV1870-8AN10

  • 15 m (49.22 ft)

6XV1870-8AN15

IE M12 Plug PRO

For assembly in the field, M12 plug-in connector (D-coded), metal enclosure, UL, fast connection method, plug connector

 

  • 1 unit

6GK1901-0DB20-6AA0

  • 8 units

6GK1901-0DB20-6AA8

  • 1 unit (angled)

3RK1902-2DA00

RJ45 PLUG PRO connector

For on-site assembly for CU240D‑2 PN‑F PP or CU250D‑2 PN‑F PP Control Unit, UL
1 package = 1 unit

 

  • 1 unit

6GK1901-1BB10-6AA0

SIMATIC NET POF/PCF cables (fiber optic)

For CU240D‑2 PN‑F FO and CU250D‑2 PN‑F FO

Coded cables for assembly in the field (sold by the meter)

 

  • POF standard cable GP 980/1000
    Minimum order quantity: 20 m (66 ft)

6XV1874-2A

  • POF trailing cable 980/1000
    Minimum order quantity: 20 m (66 ft)

6XV1874-2B

  • PCF standard cable GP 200/230
    With UL approval
    Minimum order quantity: 20 m (66 ft)

6XV1861-2D

  • PCF trailing cable 200/230
    With UL approval
    Minimum order quantity: 20 m (66 ft)

6XV1861-2C

Connectors for fiber-optic cables

POF/PCF plug-in connectors for assembly in the field

 

  • IE SC RJ POF PLUG PRO (1 unit)

6GK1900-0MB00-6AA0

  • IE SC RJ PCF PLUG PRO (1 unit)

6GK1900-0NB00-6AA0



PROFIBUS connecting cable

Flexible plug-in cables/connectors for transmission of data (up to 12 Mbit/s) from PROFIBUS stations.

Selection and ordering data

Description

Article No.

PROFIBUS M12 plug-in cable

Pre-assembled with two 5-pole M12 plug/socket connectors, UL
Length:

 

  • 0.3 m (0.98 ft)

6XV1830-3DE30

  • 0.5 m (1.64 ft)

6XV1830-3DE50

  • 1 m (3.28 ft)

6XV1830-3DH10

  • 1.5 m (4.92 ft)

6XV1830-3DH15

  • 2 m (6.56 ft)

6XV1830-3DH20

  • 3 m (9.84 ft)

6XV1830-3DH30

  • 5 m (16.41 ft)

6XV1830-3DH50

  • 10 m (32.81 ft)

6XV1830-3DN10

  • 15 m (49.22 ft)

6XV1830-3DN15

PROFIBUS M12 connector

5-pole, B-coded, metal enclosure, 1 package = 5 units

 

  • Pin insert

6GK1905-0EA00

  • Female contact insert

6GK1905-0EB00



Connecting cables/connectors for supplying the Control Unit with 24 V DC power

Selection and ordering data

Description

Article No.

7/8" plug-in cable

For power supply, pre-assembled with two 5-pole 7/8" plug/socket connectors, UL
5 × 1.5 mm2
Length:

 

  • 0.3 m (0.98 ft)

6XV1822-5BE30

  • 0.5 m (1.64 ft)

6XV1822-5BE50

  • 1 m (3.28 ft)

6XV1822-5BH10

  • 1.5 m (4.92 ft)

6XV1822-5BH15

  • 2 m (6.56 ft)

6XV1822-5BH20

  • 3 m (9.84 ft)

6XV1822-5BH30

  • 5 m (16.41 ft)

6XV1822-5BH50

  • 10 m (32.81 ft)

6XV1822-5BN10

  • 15 m (49.22 ft)

6XV1822-5BN15

7/8" plug-in connector

5-pole, B-coded, plastic enclosure, 1 package = 5 units

 

  • Pin insert (OUT)

6GK1905-0FA00

  • Female contact insert (IN)

6GK1905-0FB00

POWER PLUG PRO plug-in connector

For the CU2x0D-2 PN-F PP/FO
5-pole push‑pull power-plug for on-site assembly
1 Pack = 1 unit

 
  • 1 unit

6GK1907-0AB10-6AA0



Connecting cables and connectors for digital inputs and outputs

Selection and ordering data

Description

Article No.

M12 plug-in cable

With PUR sheath, to connect digital sensors and actuators, pre-assembled at one end, angled, plug connector, 5-pole, 5 × 0.34 mm2, UL
Length:

 

  • 1.5 m (4.92 ft)

3RK1902-4HB15-5AA0

  • 5 m (16.41 ft)

3RK1902-4HB50-5AA0

  • 10 m (32.81 ft)

3RK1902-4HC01-5AA0

M12 connector

For screw mounting, 5-pole
screw-type connection max. 0.75 mm2,
A-coded, max. 4 A, UL, plug connector

 

  • Straight

3RK1902-4BA00-5AA0

  • Angled

3RK1902-4DA00-5AA0



Connecting cables and connectors for encoders and analog inputs

Selection and ordering data

Description

Ordering (see Solution Partner)

M12 cable connector

8-pole plug connector

 

  • Straight cable outlet

Ordered from and supplied by KnorrTec

  • Angled cable outlet

Ordered from and supplied by KnorrTec

M12 plug-in cable

Pre-assembled at one end, straight, plug connector, 8-pole, 4 × 2 × AWG24, shielded, PUR gray, suitable for trailing cables, for HTL and SSI encoders

Length:

 

  • 1.5 m (4.92 ft)

Ordered from and supplied by KnorrTec

  • 5 m (16.41 ft)

Ordered from and supplied by KnorrTec

  • 10 m (32.81 ft)

Ordered from and supplied by KnorrTec

M12 plug-in cable

Pre-assembled at both ends, 8-pole M12 male connector to 12-pole M23 socket, 4 × 2 × AWG24, shielded, PUR gray, suitable for trailing cables

  • HTL plug-in cable
  • SSI plug-in cable

Length:

 

  • 1.5 m (4.92 ft)

Ordered from and supplied by KnorrTec

  • 5 m (16.41 ft)

Ordered from and supplied by KnorrTec

  • 10 m (32.81 ft)

Ordered from and supplied by KnorrTec

T distribution piece

To connect two analog inputs

8-pole M12 male connector to 2 × 4-pole M12 socket, angled

Ordered from and supplied by KnorrTec



Connecting cables for Power Modules
Connecting cables pre-assembled at one end and connector sets to connect to the line supply

Selection and ordering data

Description

Article No.

Connecting cable pre-assembled at one end

Power supply cable, open at one end, for HAN Q4/2, angled, 4 × 4 mm2

 

  • 1.5 m (4.92 ft) long

3RK1911-0DB13

  • 5 m (16.41 ft) long

3RK1911-0DB33

Connector set for the power supply

HAN Q4/2

 

  • 2.5 mm2

3RK1911-2BE50

  • 4 mm2

3RK1911-2BE10

  • 6 mm2

3RK1911-2BE30



Motor cables pre-assembled at one end and connector sets to connect the Power Module to the motor

Selection and ordering data

Motor cables pre-assembled at one end

For motors with brake and temperature sensor
with HAN Q8 connector, shielded

Article No.

(HTG: supplied by Harting)
(ZKT: supplied by KnorrTec)

Cross-section

4 × 1.5 mm2
2 × (2 × 0.75 mm2)

4 × 2.5 mm2
2 × (2 × 0.75 mm2)

4 × 4 mm2
2 × 1 mm2 + 2 × 1.5 mm2

  • 1.5 m (4.92 ft) long

HTG: 61 88 201 0288

HTG: 61 88 201 0291

HTG: 61 88 201 0303

 

ZKT: 70020501000150

ZKT: 70009601000150

ZKT: 70017001000150

  • 3 m (9.84 ft) long

HTG: 61 88 201 0289

HTG: 61 88 201 0292

HTG: 61 88 201 0304

 

ZKT: 70020501000300

ZKT: 70009601000300

ZKT: 70017001000300

  • 5 m (16.41 ft) long

HTG: 61 88 201 0290

HTG: 61 88 201 0293

HTG: 61 88 201 0305

 

ZKT: 70020501000500

ZKT: 70009601000500

ZKT: 70017001000500

  • 10 m (32.81 ft) long

HTG: 61 88 201 0299

HTG: 61 88 201 0301

HTG: 61 88 201 0306

 

ZKT: 70020501001000

ZKT: 70009601001000

ZKT: 70017001001000

Connector set for motor cable

HAN Q8, shielded

 

 

HTG: 61 83 401 0131

HTG: 61 83 401 0132

HTG: 61 83 401 0133

 

ZKT: 10032001

ZKT: 10032011

ZKT: 10032021



Power bus distribution 400 V in IP65 degree of protection

Selection and ordering data

Description

Ordering (see Solution Partner)

Power T clamp connector for 2.5 ... 6 mm2

With attached 7-pole connector, female contact insert, grommet housing, UL

Seals for various cable cross-sections must be ordered separately

Ordered from and supplied by Harting

T clamp connector

Completely pre-assembled

Ordered from and supplied by KnorrTec

T distributor box, IDC connection power cable

Pre-assembled, UL, uncut power cable, 2.5 ... 6 mm2

Push-in connection: 1.5 ... 6 mm2

Seals for various cable cross-sections must be ordered separately

Ordered from and supplied by Weidmüller

Y distributor

For direct connection of 400 V supply line, HAN Q4/2, conductor cross-section 1.5 ... 4 mm2

Ordered from and supplied by Harting



















skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Àðìàòóðà DENDOR

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Äàò÷èêè è èçìåðèòåëè

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ðåãóëÿòîðû è ðåãèñòðàòîðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ïíåâìàòè÷åñêîå îáîðóäîâàíèå

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Êðàíû è Êëàïàíû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Èçìåðèòåëüíûå ïðèáîðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ñèñòåìû áåñïðîâîäíîãî óïðàâëåíèÿ «óìíûé äîì»

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Áåñêîíòàêòíûå âûêëþ÷àòåëè Êîíå÷íûå âûêëþ÷àòåëè Îïòè÷åñêèå äàò÷èêè Ýíêîäåðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Óñòàíîâêà óìÿã÷åíèÿ

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Óñòàíîâêà îáåçæåëåçèâàíèÿ

  © ÎÎÎ "ÑÊ ÝÍÅÐÃÎ" 2007-2022
  (4872) 700-366  skenergo@mail.ru
ßíäåêñ.Ìåòðèêà