SIPLUS extreme RAIL CM 4x IO-Link . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS extreme RAIL CM 4x IO-Link

| | | | | |

SIPLUS extreme RAIL CM 4x IO-Link

Article number		6AG2137-6BD00-1BA0
		SIPLUS ET 200SP CM 4XIO-LINK ST T1 RAIL
General information
Product type designation		ET 200SP, CM 4xIO-Link
Product function
? I&M data		Yes
Supply voltage
Rated value (DC)		24 V
Reverse polarity protection		Yes
Input current
Current consumption, max.		45 mA; without load
Encoder supply
Number of outputs		4
Output current
? Rated value		200 mA
Power loss
Power loss, typ.		1 W
Isochronous mode
Equidistance		Yes
Interrupts/diagnostics/status information
Diagnostics function		Yes
Alarms
? Diagnostic alarm		Yes; The port diagnosis is available in the IO-Link mode only.
Diagnostic messages
? Monitoring the supply voltage		Yes
Diagnostics indication LED
? Monitoring of the supply voltage (PWR-LED)		Yes; green PWR LED
? Channel status display		Yes; one green LED for channel status Qn (SIO mode) and port status Cn (IO-Link mode) per channel
? for channel diagnostics		Yes; red Fn LED
? for module diagnostics		Yes; green/red DIAG LED
Potential separation
Potential separation channels
? between the channels		No
? between the channels and backplane bus		Yes
Isolation
Isolation tested with		707 V DC (type test) and according to EN 50155 (routine test)
Standards, approvals, certificates
Railway application
? EN 50121-3-2		Yes; EMC for rail vehicles
? EN 50121-4		Yes; EMC for signal and telecommunications systems
? EN 50124-1		Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC
? EN 50125-1		Yes; Rail vehicles - see ambient conditions
? EN 50125-2		Yes; Stationary electrical equipment - see ambient conditions
? EN 50125-3		Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)
? EN 50155		Yes; Rail vehicles - temperature class T1, horizontal mounting position, salt spray Class ST2
? EN 61373		Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B
? Fire protection acc. to EN 45545-2		Yes; Rail vehicles - verification on request
Ambient conditions
Ambient temperature during operation
? horizontal installation, min.		-40 °C; = Tmin; Startup @ -25 °C
? horizontal installation, max.		60 °C; = Tmax; +70 °C for 10 min (T1 acc. to EN 50155)
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against biologically active substances/conformity with EN 60721-3-5		Yes; Class 5B2 mold and fungal spores (excluding fauna). The supplied plug covers must remain in place over the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances/conformity with EN 60721-3-5		Yes; Class 5C3 (RH < 75%) including salt spray according to EN 50155 (ST2). The supplied plug covers must remain in place over the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances/conformity with EN 60721-3-5		Yes; Class 5S3 including sand and dust. The supplied plug covers must remain in place over the unused interfaces during operation!
Dimensions
Width		15 mm
Weights
Weight, approx.		30 g
Other
Note:		For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания