Siemens
ÑÐÅÄÑÒÂÀ ÏÐÎÌÛØËÅÍÍÎÉ ÀÂÒÎÌÀÒÈÇÀÖÈÈ
îôèöèàëüíûé ïàðòíåð Ñèìåíñ
Êàòàëîã ÑÀ01 2017
àðõèâíûé
(4872) 700-366
skenergo@mail.ru

Liquid-cooled units
General technical specifications

Unless clearly specified otherwise, the following technical data are valid for all the following components of the liquid-cooled SINAMICS S120 drive system in the chassis format.

Electrical specifications

Rated voltages

380 ... 480 V 3 AC ±10 % (-15 % <1 min)

500 ... 690 V 3 AC ±10 % (-15 % <1 min)

Line supply types

Grounded TN/TT systems and non-grounded IT systems

Line frequency

47 ... 63 Hz

Overvoltage category

III to EN 61800?5?1

Electronics power supply

24 V DC, -15 % +20 %
implemented as PELV circuit in accordance with EN 61800-5-1
Ground = negative pole grounded via the electronics

Rated short-circuit current

per IEC, in conjunction with the specified fuses or circuit breakers

 

  • 1.1 ... 447 kW

65 kA

  • 448 ... 671 kW

84 kA

  • 672 ... 1193 kW

170 kA

  • > 1194 kW

200 kA

Rated short-circuit current SCCR
(Short Circuit Current Rating)

according to UL508C (up to 600 V), in conjunction with the specified fuses or circuit breakers

 

  • 1.1 ... 447 kW

65 kA

  • 448 ... 671 kW

84 kA

  • 672 ... 1193 kW

170 kA

  • > 1194 kW

200 kA

Control method

Vector/Servo control with and without encoder or V/f control

Fixed speeds

15 fixed speeds plus 1 minimum speed, parameterizable (in the default setting, 3 fixed setpoints plus 1 minimum speed are selectable using terminal block/PROFIBUS/PROFINET)

Skippable speed ranges

4, parameterizable

Setpoint resolution

0.001 rpm digital (14 bits + sign)
12 bits analog

Braking operation

With Active Line Modules, four-quadrant operation as standard (energy recovery).

With Basic Line Modules, two-quadrant operation as standard, braking by means of an optional braking chopper, or alternatively by a Motor Module.

Mechanical specifications

Degree of protection

IP00 (IP20, without taking into account the connecting busbars)

Protection class

I acc. to EN 61800?5?1

Touch protection

EN 50274/DGUV regulation 3 when used as intended

Cooling method

Liquid cooling with integrated heat exchanger in aluminum or stainless steel version

Ambient conditions

Storage 1)

Transport 1)

Operation

Ambient temperature (air)

-25 ... +55 °C (-13 ... +131 °F)

Class 1K4
acc. to EN 60721?3?1

-25 ... +70 °C (-13 ... +158 °F)

Class 2K4
acc. to EN 60721?3?2

Line-side components, Power Modules, Line Modules and Motor Modules:
0 ... 45 °C (32 ... 113 °F)without derating
>45 ... 50 °C (113 ... 122 °F) see derating characteristics

Control Units, supplementary system components, and Sensor Modules:
0 ... 55 °C (32 ... 131 °F) (for operation in a control cabinet)

DC link components and motor-side components:
0 ... 55 °C (32 ... 131 °F)

Relative humidity

Condensation, splashwater, and ice formation not permitted (EN 60204, Part 1)

5 ... 95 %

Class 1K4
acc. to EN 60721?3?1

Max. 95 % at 40 °C (104 °F)

Class 2K4
acc. to EN 60721?3?2

5 ... 95 %

Class 3K3
acc. to EN 60721?3?3

Environmental class/harmful chemical substances

Class 1C2
acc. to EN 60721?3?1

Class 2C2
acc. to EN 60721?3?2

Class 3C2
acc. to EN 60721?3?3

Organic/biological influences

Class 1B1
acc. to EN 60721?3?1

Class 2B1
acc. to EN 60721?3?2

Class 3B1
acc. to EN 60721?3?3

Degree of pollution

2 acc. to IEC/EN 61800?5?1

Installation altitude

Up to 2000 m (6562 ft) above sea level without derating,
> 2000 m (6562 ft) above sea level, refer to the derating data

Mechanical stability

Storage 1)

Transport 1)

Operation

Vibratory load

 

Class 2M2
acc. to EN 60721-3-2

Test values
acc. to EN 60068?2?6 test Fc:

  • 10 ... 58 Hz with constant deflection 0.075 mm
  • 58 ... 150 Hz with constant acceleration 9.81 m/s2 (1 ? g)

Shock load

 

Class 2M2
acc. to EN 60721-3-2

Test values
acc. to EN 60068?2?27 test Ea:
98 m/s2 (10 ? g)/20 ms

Compliance with standards

Certificates of suitability

CE (EMC Directive No. 2014/30/EU, Low Voltage Directive No. 2014/35/EU and Machinery Directive 2006/42/EC for functional safety)
RCM
cULus (only for devices connected to line supply voltages 380 ... 480 V 3 AC and 500 ... 600 V 3 AC)

Electromagnetic compatibility

Built-in units SINAMICS S120 chassis format can be operated in the second environment, Category C3/C2 according to EMC product standard EN 61800?3.

For further information, see section Tools and configuring.



1) In transport packaging.

Deviations from the specified class are underlined.

Cooling circuit and coolant quality

The following tables and sections describe the quality requirements of the coolant used in the liquid-cooled SINAMICS S120 drive system in chassis format.

Cooling circuit

  • System pressure with reference to atmospheric pressure, max.

600 kPa

  • Pressure drop at rated volumetric flow

70 kPa

  • Recommended pressure range

80 ... 200 kPa

  • Inlet temperature of liquid coolant

Dependent on ambient temperature, no condensation permitted

0 ... 45° C (32 ... 113 °F) without derating

>45 … 50 °C (113 ... 122 °F), see derating data

Anti-freeze essential for temperature range between 0 °C (32 °F) and 5 °C (41 °F)

Coolant quality

  • Coolant basis for aluminum heat sinks

Distilled, demineralized, completely desalinated water or deionized water with reduced electrical conductivity ISO 3696, quality 3 or based on IEC 60993

  • Electrical conductivity

<30 ?S/cm (3 mS/m)

  • pH value

5 ... 8

  • Components that can be oxidized as oxygen content

< 30 mg/l

  • Residue after vaporization and drying at 110 °C

<10 mg/kg

  • Coolant basis for stainless steel heat sinks

Filtered drinking water

  • Electrical conductivity

<2000 ?S/cm

  • pH value

6.5 ... 9

  • Chloride ions

<200 mg/l

  • Sulfate ions

<240 mg/l

  • Nitrate ions

< 50 mg/l

  • Total hardness

< 1.7 mmol/l

  • Dissolved substances

< 340 mg/l

  • Size of entrained particles

< 100 ?m

 

The coolant definition specified here should only be considered as recommendation. For units that have been shipped, the information and data provided in the equipment manual supplied should be observed!



Antifreeze and inhibitors

Antifreeze

Antifrogen N

Antifrogen L

DOWCAL 100

Manufacturer

Clariant

Clariant

DOW

Chemical base

Ethylene glycol

Propylene glycol

Ethylene glycol

Minimum concentration

20 %

25 %

20 %

Anti-freeze agent with minimum concentration

-10 °C

-10 °C

-10 °C

Maximum concentration

45 %

48 %

44 %

Anti-freeze agent with maximum concentration

-30 °C

-30 °C

-30 °C

Inhibitor content

Contains inhibitors with nitrites

Contains inhibitors that are free of nitrates, amines, borates and phosphates

Contains inhibitors that are free of nitrates, amines and phosphates

Biocide action with a concentration of

> 20 %

> 30 %

> 20 %



Biocides prevent corrosion that is caused by slime-forming, corrosive or iron-depositing bacteria. These can occur in closed cooling circuits with low water hardness and in open cooling circuits. Biocides must always be selected according to the relevant bacterial risks. Compatibility with inhibitors or antifreeze used with them must be checked on a case-by-case basis.

Inhibitors

Antifrogen N

ANTICORIT S 2000 A

Manufacturer

Clariant

Fuchs

Chemical base

Ethylene glycol

Minimum concentration

20 %

4 %

Maximum concentration

45 %

5 %



Recommended service

The manufacturer of the antifreeze/inhibitor should analyze the coolant at least once per annum. The concentration and boundary conditions of the antifreeze/inhibitor should be checked. It may be necessary to correct the concentration on the plant side.

Protection against condensation

With liquid-cooled units, warm air can condense on the cold surfaces of heat sinks, pipes and hoses. This condensation depends on the air humidity and the temperature difference between the ambient air and the coolant.

The water which is produced as a result of condensation can cause corrosion as well as electrical damage such as creepage shorts and flashovers. As the SINAMICS units cannot prevent condensation if it is caused by the prevailing climatic conditions, any potential risk of condensation must be prevented by appropriate engineering or by precautionary measures implemented by the customer. These measures include the following:

  • a fixed coolant temperature that has been adjusted to the expected air humidity or ambient temperature ensures that critical differences between the coolant and ambient air temperatures do not develop or
  • temperature regulation of the coolant as a function of the ambient air temperature

The temperature at which water vapor contained in the air condenses into water is known as the dew point. To prevent condensation reliably, the coolant temperature must always be higher than the dew point.

The table below specifies the dew point as a function of room temperature T and relative air humidity ? for an atmospheric pressure of 100 kPa (1 bar). This corresponds to an installation altitude of 0 up to approximately 500 m (1640 ft) above sea level. Since the dew point drops as the air pressure decreases, the dew point values at higher installation altitudes are lower than the specified table values. It is therefore the safest approach to engineer the coolant temperature according to the values in the table for an installation altitude of zero.

Ambient temperature

Relative air humidity ?

T

20 %

30 %

40 %

50 %

60 %

70 %

80 %

85 %

90 %

95 %

100 %

10 °C (50 °F)

<0 °C (32 °F)

<0 °C (32 °F)

<0 °C (32 °F)

0.2 °C (32.4 °F)

2.7 °C (36.9 °F)

4.8 °C (40.6 °F)

6.7 °C (44.1 °F)

7.6 °C (45.7 °F)

8.4 °C (47.1 °F)

9.2 °C (48.6 °F)

10 °C (50 °F)

20 °C (68 °F)

<0 °C (32 °F)

2 °C (35.6 °F)

6 °C (42.8 °F)

9.3 °C (48.7 °F)

12 °C (53.6 °F)

14.3 °C (57.7 °F)

16.4 °C (61.5 °F)

17.4 °C (63.3 °F)

18.3 °C (64.9 °F)

19.1 °C (66.4 °F)

20 °C (68 °F)

25 °C (77 °F)

0.6 °C (33.1 °F)

6.3 °C (43.3 °F)

10.5 °C (50.9 °F)

13.8 °C (56.8 °F)

16.7 °C (62.1 °F)

19.1 °C (66.4 °F)

21.2 °C (70.2 °F)

22.2 °C (72 °F)

23.2 °C (73.8 °F)

24.1 °C (75.4 °F)

24.9 °C (76.8 °F)

30 °C (86 °F)

4.7 °C (40.5 °F)

10.5 °C (50.9 °F)

14.9 °C (58.8 °F)

18.4 °C (65.1 °F)

21.3 °C (70.3 °F)

23.8 °C (74.8 °F)

26.1 °C (79 °F)

27.1 °C (80.8 °F)

28.1 °C (82.6 °F)

29 °C (84.2 °F)

29.9 °C (85.8 °F)

35 °C (95 °F)

8.7 °C (47.7 °F)

14.8 °C (58.6 °F)

19.3 °C (66.7 °F)

22.9 °C (73.2 °F)

26 °C (78.8 °F)

28.6 °C (83.5 °F)

30.9 °C (87.6 °F)

32 °C (89.6 °F)

33 °C (91.4 °F)

34 °C (93.2 °F)

34.9 °C (94.8 °F)

40 °C (104 °F)

12.8 °C (55 °F)

19.1 °C (66.4 °F)

23.7 °C (74.7 °F)

27.5 °C (81.5 °F)

30.6 °C (87.1 °F)

33.4 °C (92.1 °F)

35.8 °C (96.4 °F)

36.9 °C (98.4 °F)

37.9 °C (100.2 °F)

38.9 °C (102 °F)

39.9 °C (103.8 °F)

45 °C (113 °F)

16.8 °C (62.2 °F)

23.3 °C (73.9 °F)

28.2 °C (82.8 °F)

32 °C (89.6 °F)

35.3 °C (95.5 °F)

38.1 °C (101.6 °F)

40.6 °C (105.1 °F)

41.8 °C (107.2 °F)

42.9 °C (109.2 °F)

43.9 °C (111 °F)

44.9 °C (112.8 °F)

50 °C (122 °F)

20.8 °C (69.4 °F)

27.5 °C (81.5 °F)

32.6 °C (90.7 °F)

36.6 °C (97.9 °F)

40 °C (104 °F)

42.9 °C (109.2 °F)

45.5 °C (113.9 °F)

46.6 °C (115.9 °F)

47.8 °C (118 °F)

48.9 °C (120 °F)

49.9 °C (121.8 °F)



A detailed description of the cooling circuits and the recommended coolant is given in the SINAMICS Low Voltage Engineering Manual.

















skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Àðìàòóðà DENDOR

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Äàò÷èêè è èçìåðèòåëè

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ðåãóëÿòîðû è ðåãèñòðàòîðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ïíåâìàòè÷åñêîå îáîðóäîâàíèå

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Êðàíû è Êëàïàíû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Èçìåðèòåëüíûå ïðèáîðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ñèñòåìû áåñïðîâîäíîãî óïðàâëåíèÿ «óìíûé äîì»

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Áåñêîíòàêòíûå âûêëþ÷àòåëè Êîíå÷íûå âûêëþ÷àòåëè Îïòè÷åñêèå äàò÷èêè Ýíêîäåðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Óñòàíîâêà óìÿã÷åíèÿ

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Óñòàíîâêà îáåçæåëåçèâàíèÿ

  © ÎÎÎ "ÑÊ ÝÍÅÐÃÎ" 2007-2022
  (4872) 700-366  skenergo@mail.ru
ßíäåêñ.Ìåòðèêà