SIPLUS analog inputs . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS analog inputs

| | | | | |

SIPLUS analog inputs

Article number	6AG1134-6HD00-7BA1	6AG1134-6GD00-7BA1	6AG1134-6TD00-2CA1
	SIPLUS ET 200SP AI 4xU/I 2-wire ST	SIPLUS ET 200SP AI 4xI 2-/4-wire ST	SIPLUS ET 200SP AI 4XI 2-WIRE 4...20MA H
General information
Product type designation	AI 4xU/I 2-wire ST	AI 4xI 2-/4-wire ST	AI 4xI 2-wire 4 ... 20 mA HART
Product function
? I&M data	Yes	Yes	Yes; I&M0 to I&M3
? Measuring range scalable			No
Engineering with
? STEP 7 TIA Portal configurable/integrated as of version	V11 SP2 with HSP0024 / -	V11 SP2 with HSP0024 / -	V13 SP1
? STEP 7 configurable/integrated as of version	V5.5 SP2 with GSD file / -	V5.5 SP2 with GSD file / -	V5.5 SP4 and higher
? PCS 7 configurable/integrated as of version			V8.1 SP1
? PROFIBUS as of GSD version/GSD revision			GSD Revision 5
? PROFINET as of GSD version/GSD revision			GSDML V2.3
Operating mode
? Oversampling			No
? MSI			No
CiR – Configuration in RUN
Reparameterization possible in RUN			Yes
Calibration possible in RUN			No
Supply voltage
Type of supply voltage			DC
Rated value (DC)	24 V	24 V	24 V
Reverse polarity protection	Yes	Yes	Yes
Analog inputs
Number of analog inputs	4; > 60 °C max. 1x +/- 20 mA or 4x +/- 10 V permissible	4; > 60 °C max. 1x +/- 20 mA permissible	4; Differential inputs
permissible input voltage for voltage input (destruction limit), max.	30 V
permissible input current for current input (destruction limit), max.	50 mA	50 mA	50 mA
Cycle time (all channels), min.	Sum of the basic conversion times and additional processing times (depending on the parameterization of the active channels)	Sum of the basic conversion times and additional processing times (depending on the parameterization of the active channels)
Input ranges (rated values), voltages
? 0 to +10 V	Yes; 15 bit
? 1 V to 5 V	Yes; 15 bit
? -10 V to +10 V	Yes; 16 bit incl. sign
? -5 V to +5 V	Yes; 16 bit incl. sign
Input ranges (rated values), currents
? 0 to 20 mA	Yes; 15 bit	Yes; 15 bit	No
? -20 mA to +20 mA		Yes; 16 bit incl. sign	No
? 4 mA to 20 mA	Yes; 15 bit	Yes; 15 bit	Yes; 15 bit + sign
Cable length
? shielded, max.	200 m	200 m	800 m
Analog value generation for the inputs
Integration and conversion time/resolution per channel
? Resolution with overrange (bit including sign), max.	16 bit	16 bit	16 bit
? Integration time, parameterizable	Yes	Yes	Yes; channel by channel
? Interference voltage suppression for interference frequency f1 in Hz	16.6 / 50 / 60 Hz	16.6 / 50 / 60 Hz	10 / 50 / 60 Hz
? Conversion time (per channel)	180 / 60 / 50 ms	180 / 60 / 50 ms
Smoothing of measured values
? Number of smoothing levels			4; None; 4/8/16 times
? parameterizable	Yes	Yes	Yes
Encoder
Connection of signal encoders
? for voltage measurement	Yes		No
? for current measurement as 2-wire transducer	Yes	Yes	Yes
— Burden of 2-wire transmitter, max.	650 ?	650 ?
? for current measurement as 4-wire transducer		Yes
Errors/accuracies
Basic error limit (operational limit at 25 °C)
? Voltage, relative to input range, (+/-)	0.3 %
? Current, relative to input range, (+/-)	0.3 %	0.3 %	0.3 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
? Series mode interference (peak value of interference < rated value of input range), min.	70 dB	70 dB	60 dB
? Common mode voltage, max.	10 V	10 V
? Common mode interference, min.	90 dB	90 dB
Isochronous mode
Isochronous operation (application synchronized up to terminal)			No
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes	Yes
Alarms
? Diagnostic alarm	Yes	Yes	Yes
? Limit value alarm			Yes
Diagnostic messages
? Monitoring the supply voltage	Yes	Yes	Yes
? Wire-break	Yes; at 4 to 20 mA	Yes; at 4 to 20 mA	Yes; channel by channel
? Short-circuit	Yes; with 1 to 5 V or 2-wire mode: Short-circuit of the encoder supply to ground or of an input to the encoder supply	Yes; 2-wire mode: Short-circuit of the encoder supply to ground or of an input to the encoder supply	Yes; Channel-by-channel, short-circuit of the encoder supply to ground or of an input to the encoder supply
? Group error			Yes
? Overflow/underflow	Yes	Yes	Yes; channel by channel
Diagnostics indication LED
? Monitoring of the supply voltage (PWR-LED)	Yes; Green LED	Yes; Green LED	Yes; green PWR LED
? Channel status display	Yes; Green LED	Yes; Green LED	Yes; Green LED
? for channel diagnostics			Yes; Red LED
? for module diagnostics	Yes; Green/red LED	Yes; Green/red LED	Yes; green/red DIAG LED
Potential separation
Potential separation channels
? between the channels and backplane bus	Yes	Yes	Yes
Isolation
Isolation tested with	707 V DC	707 V DC	707 V DC (type test)
Ambient conditions
Ambient temperature during operation
? horizontal installation, min.	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C
? horizontal installation, max.	70 °C; = Tmax; > 60 °C max. 1x +/- 20 mA or 4x +/- 10 V permissible	70 °C; = Tmax; > 60 °C max. 1x +/- 20 mA permissible	60 °C
? vertical installation, min.	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C
? vertical installation, max.	50 °C; = Tmax	50 °C; = Tmax	50 °C
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude			Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width	15 mm	15 mm	15 mm
Height	73 mm	73 mm
Depth	58 mm	58 mm
Weights
Weight, approx.	31 g	31 g	31 g

Article number	6AG1134-6HB00-2CA1	6AG1134-6HB00-2DA1	6AG1134-6JF00-2CA1	6AG1134-6JD00-2CA1
	SIPLUS ET 200SP AI 2 X U/I 2-, 4-WIRE HF	SIPLUS ET 200SP AI 2 X U/I 2-, 4-WIRE HS	SIPLUS ET 200SP AI 8XRTD/TC 2-WIRE HF	SIPLUS ET 200SP AI 4xRTD/TC HF
General information
Product type designation	AI 2xU/I 2-/4-wire HF		AI 8xRTD/TC 2-wire HF	AI 4xRTD/TC 2-/3-/4-wire HF
Product function
? I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes
? Measuring range scalable	No	No
Engineering with
? STEP 7 TIA Portal configurable/integrated as of version	V13	V13 SP1	V13	V11 SP2 with HSP0024 / -
? STEP 7 configurable/integrated as of version	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 / -	V5.5 SP2 with GSD file / -
? PCS 7 configurable/integrated as of version	V8.1 SP1
? PROFIBUS as of GSD version/GSD revision	GSD Revision 5	GSD Revision 5	GSD Revision 5
? PROFINET as of GSD version/GSD revision	GSDML V2.3	GSDML V2.3	GSDML V2.3
Operating mode
? Oversampling	No	Yes; 2 channels per module	No
? MSI	No	No	No
CiR – Configuration in RUN
Reparameterization possible in RUN	Yes	Yes	Yes
Calibration possible in RUN	Yes	No	Yes
Supply voltage
Type of supply voltage	DC	DC	DC
Rated value (DC)	24 V	24 V	24 V	24 V
Reverse polarity protection	Yes	Yes	Yes	Yes
Analog inputs
Number of analog inputs	2; Differential inputs	2; Differential inputs	8	4
permissible input voltage for voltage input (destruction limit), max.	30 V	30 V	30 V	30 V
permissible input current for current input (destruction limit), max.	50 mA	50 mA
Constant measurement current for resistance-type transmitter, typ.			2 mA	2 mA
Cycle time (all channels), min.		125 µs	Sum of the basic conversion times and additional processing times (depending on the parameterization of the active channels)	Sum of the basic conversion times and additional processing times (depending on the parameterization of the active channels); for line compensation in case of a three-wire connection, an additional cycle is necessary
Technical unit for temperature measurement adjustable			Yes; °C/°F/K	Yes; °C/°F/K
Analog input with oversampling		Yes
? Values per cycle, max.		16
? Resolution, min.		50 µs
Input ranges (rated values), voltages
? 0 to +10 V	Yes; 15 bit	Yes; 15 bit
? 1 V to 5 V	Yes; 15 bit	Yes; 13 bit
? -1 V to +1 V			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? -10 V to +10 V	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? -250 mV to +250 mV			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? -5 V to +5 V	Yes; 16 bit incl. sign	Yes; 15 bit incl. sign
? -50 mV to +50 mV			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? -80 mV to +80 mV			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
Input ranges (rated values), currents
? 0 to 20 mA	Yes; 15 bit	Yes; 15 bit
? -20 mA to +20 mA	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? 4 mA to 20 mA	Yes; 15 bit	Yes; 14 bit
Input ranges (rated values), thermocouples
? Type B			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? Type C			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? Type E			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? Type J			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? Type K			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? Type L			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? Type N			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? Type R			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? Type S			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? Type T			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? Type U			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? Type TXK/TXK(L) to GOST			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
Input ranges (rated values), resistance thermometer
? Cu 10				Yes; 16 bit incl. sign
? Ni 100			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? Ni 1000			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? LG-Ni 1000			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? Ni 120			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? Ni 200			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? Ni 500			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? Pt 100			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? Pt 1000			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? Pt 200			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
? Pt 500			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
Input ranges (rated values), resistors
? 0 to 150 ohms			Yes; 15 bit	Yes; 15 bit
? 0 to 300 ohms			Yes; 15 bit	Yes; 15 bit
? 0 to 600 ohms			Yes; 15 bit	Yes; 15 bit
? 0 to 3000 ohms			Yes; 15 bit	Yes; 15 bit
? 0 to 6000 ohms			Yes; 15 bit	Yes; 15 bit
? PTC			Yes; 15 bit	Yes; 15 bit
Thermocouple (TC)
Temperature compensation
— parameterizable			Yes	Yes
Cable length
? shielded, max.	1 000 m; 200 m for voltage measurement	1 000 m; 200 m for voltage measurement	200 m; 50 m with thermocouples	200 m; 50 m with thermocouples
Analog value generation for the inputs
Integration and conversion time/resolution per channel
? Resolution with overrange (bit including sign), max.	16 bit	16 bit	16 bit	16 bit
? Integration time, parameterizable	Yes		Yes	Yes
? Basic conversion time, including integration time (ms)
— additional processing time for wire-break check			2 ms; In the ranges resistance thermometers, resistors and thermocouples	2 ms; In the ranges resistance thermometers, resistors and thermocouples
— additional power line wire-break check				2 ms; for 3/4 wire transducer (resistance thermometer and resistor)
? Interference voltage suppression for interference frequency f1 in Hz	16.6 / 50 / 60 / 300 / 600 / 1 200 / 2 400 / 4 800	No	16.6 / 50 / 60 Hz	16.6 / 50 / 60 Hz
? Conversion time (per channel)		10 µs	180 / 60 / 50 ms	180 / 60 / 50 ms
? Basic execution time of the module (all channels released)	1 ms
Smoothing of measured values
? Number of smoothing levels	6; none; 2-/4-/8-/16-/32-fold	7; none; 2-/4-/8-/16-/32-/64-fold	4; None; 4/8/16 times
? parameterizable	Yes	Yes	Yes	Yes
Encoder
Connection of signal encoders
? for voltage measurement	Yes	Yes	Yes	Yes
? for current measurement as 2-wire transducer	Yes	Yes
— Burden of 2-wire transmitter, max.	650 ?	650 ?
? for current measurement as 4-wire transducer	Yes	Yes
? for resistance measurement with two-wire connection			Yes	Yes
? for resistance measurement with three-wire connection			No	Yes
? for resistance measurement with four-wire connection			No	Yes
Errors/accuracies
Basic error limit (operational limit at 25 °C)
? Voltage, relative to input range, (+/-)	0.05 %; 0.1 % at SFU 4.8 kHz	0.2 %	0.05 %	0.05 %
? Current, relative to input range, (+/-)	0.05 %; 0.1 % at SFU 4.8 kHz	0.2 %
? Resistance, relative to input range, (+/-)			0.05 %	0.05 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
? Series mode interference (peak value of interference < rated value of input range), min.			70 dB	70 dB
? Common mode voltage, max.	35 V	35 V	10 V	10 V
? Common mode interference, min.	90 dB	90 dB	90 dB	90 dB
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes	Yes	No
Filtering and processing time (TCI), min.	800 µs	80 µs
Bus cycle time (TDP), min.	1 ms	125 µs
Interrupts/diagnostics/status information
Diagnostics function	Yes		Yes	Yes
Alarms
? Diagnostic alarm	Yes	Yes	Yes	Yes
? Limit value alarm	Yes; two upper and two lower limit values in each case	Yes; two upper and two lower limit values in each case	Yes; two upper and two lower limit values in each case	Yes; two upper and two lower limit values in each case
Diagnostic messages
? Monitoring the supply voltage	Yes		Yes	Yes
? Wire-break	Yes; Measuring range 4 to 20 mA only	Yes; channel-by-channel, at 4 to 20 mA only	Yes; channel by channel	Yes
? Short-circuit	Yes; For 1 to 5 V or for current measuring ranges short-circuit in encoder supply	Yes; channel-by-channel, at 1 to 5 V or for current measuring ranges short-circuit in encoder supply
? Group error	Yes	Yes	Yes
? Overflow/underflow	Yes	Yes	Yes; channel by channel	Yes
Diagnostics indication LED
? Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED	Yes; Green LED
? Channel status display	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
? for channel diagnostics	Yes; Red LED	Yes; Red LED	Yes; Red LED	Yes; Red LED
? for module diagnostics	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; Green/red LED
Potential separation
Potential separation channels
? between the channels and backplane bus	Yes	Yes	Yes	Yes
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)	707 V DC
Ambient conditions
Ambient temperature during operation
? horizontal installation, min.	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C
? horizontal installation, max.	60 °C; = Tmax	60 °C; = Tmax	60 °C	60 °C; = Tmax
? vertical installation, min.			-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C
? vertical installation, max.			50 °C	50 °C; = Tmax
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width	15 mm	15 mm	15 mm	15 mm
Height				73 mm
Depth				58 mm
Weights
Weight, approx.	32 g	32 g	32 g	30 g

Article number		6AG1134-6PA00-7BD0
		SIPLUS ET 200SP AI Energy Meter
General information
Product type designation		AI energy meter 400VAC ST
Product function
? Voltage measurement		Yes
? Current measurement		Yes
? Energy measurement		Yes
? Frequency measurement		Yes
? Active power measurement		Yes
? Reactive power measurement		Yes
? I&M data		Yes
? Isochronous mode		No
Operating mode
? cyclic measurement		Yes
? acyclic measurement		Yes
Installation type/mounting
Mounting position		Horizontal
Supply voltage
Design of the power supply		Supply via voltage measurement channel L1
Type of supply voltage		100 - 240 V AC
permissible range, lower limit (AC)		90 V
permissible range, upper limit (AC)		264 V
relative symmetrical tolerance of the supply voltage		10 %
Line frequency
? permissible range, lower limit		47 Hz
? permissible range, upper limit		63 Hz
Power
Power consumption without expansion module, typ.		0.6 V·A
Address area
Address space per module
? Address space per module, max.		44 byte; 32 byte input / 12 byte output
Analog inputs
Cycle time (all channels), typ.		50 ms
Analog value generation for the inputs
Integration and conversion time/resolution per channel
? Resolution with overrange (bit including sign), max.		24 bit; Sigma-delta converter, 1.024 MHz
Interrupts/diagnostics/status information
Alarms
? Diagnostic alarm		Yes
? Limit value alarm		No
Diagnostics indication LED
? Monitoring of the supply voltage (PWR-LED)		Yes
? Channel status display		Yes
? for channel diagnostics		Yes
? for module diagnostics		Yes
Integrated Functions
Measuring functions
? Measuring procedure for voltage measurement		TRMS
? Measuring procedure for current measurement		TRMS
? Type of measured value acquisition		seamless
? Curve shape of voltage		Sinusoidal or distorted
? Buffering of measured variables		No
? Parameter length		44 byte
Operating mode for measured value acquisition
— automatic detection of line frequency		No; Parameterizable
— Fixation to 50 Hz		No; Default setting
— Fixation to 60 Hz		No
Measuring range
— Frequency measurement, min.		45 Hz
— Frequency measurement, max.		65 Hz
Measuring inputs for voltage
— Measurable line voltage between phase and neutral conductor		230 V
— Measurable line voltage between the line conductors		400 V
— Measurable line voltage between phase and neutral conductor, min.		90 V
— Measurable line voltage between phase and neutral conductor, max.		264 V
— Measurable line voltage between the line conductors, min.		155 V
— Measurable line voltage between the line conductors, max.		460 V
— Measurement category for voltage measurement		CAT III acc. to IEC 61010 Part 1
— Power consumption per phase		20 mW
Measuring inputs for current
— measurable relative current (AC), min.		5 %; Relative to the secondary rated current; 1 A, 5 A
— measurable relative current (AC), max.		100 %; Relative to the secondary rated current; 1 A, 5 A
— Continuous current with AC, maximum permissible		5 A
— Apparent power consumption per phase for measuring range 5 A		0.6 V·A
— Rated value short-time withstand current restricted to 1 s		100 A
— Zero point suppression		50 mA
— Surge strength		10 A; for 1 minute
Error limits
— Reference condition for measurement accuracy		Symmetric load, rated current: 20-100%, 50 Hz; active power: LF = 1, reactive power: LF = 0
— for measured variable voltage		±0.5%
— for measured variable current		±0.5%
— for measured variable power		±0.5%
— for measured variable active power		±0.5%
— for measured variable reactive power		±0.5%
— for measured variable total active energy		Class 1 acc. to IEC 62053-21:2003
— for measured variable total reactive energy		Class 2 acc. to IEC 62053-23:2003
Ambient conditions
Ambient temperature during operation
? horizontal installation, min.		-40 °C; = Tmin; Startup @ -25 °C
? horizontal installation, max.		70 °C; = Tmax; > +60 °C max. permissible current 1 A per phase
? vertical installation, min.		-40 °C; = Tmin; Startup @ -25 °C
? vertical installation, max.		50 °C; = Tmax
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width		20 mm
Weights
Weight (without packaging)		45 g
Data for selecting a current transformer
? Burden power current transformer x/1A, min.		1.25 V·A
? Burden power current transformer x/5A, min.		1.5 V·A
? Cable length (terminal-transformer) dependent on Zn and Imax		200 m

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания