SIPLUS digital outputs . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS digital outputs

| | | | | |

SIPLUS digital outputs

Article number	6AG1132-6BD20-7BA0	6AG1132-6BF00-7BA0	6AG1132-6BH00-7BA0
	SIPLUS ET200SP DQ 4x24VDC/2A ST	SIPLUS ET 200SP DQ 8x24VDC/0,5A ST	SIPLUS ET 200SP DQ 16x24VDC/0,5A ST
General information
Product type designation	DQ 4x24VDC/2A ST	DQ 8x24VDC/0.5A ST	DQ 16x24VDC/0.5A ST
Product function
? I&M data	Yes		Yes
Engineering with
? STEP 7 TIA Portal configurable/integrated as of version	V11 SP2 with HSP0024 / -		V11 SP2 with HSP0024 / -
? STEP 7 configurable/integrated as of version	V5.5 SP2 with GSD file / -		V5.5 SP2 with GSD file / -
Supply voltage
Type of supply voltage	DC		DC
Rated value (DC)	24 V	24 V	24 V
Reverse polarity protection	Yes		Yes
Digital outputs
Number of digital outputs	4; > +60 °C number of simultaneously controllable outputs max. 2 x 0.25 A or max. 4 x 0.125 A, max. total current 0.5 A	8; > +60 °C max. total current 1.0 A	16; > +60 °C max. total current 1.0 A
Short-circuit protection	Yes		Yes
Limitation of inductive shutdown voltage to	Typ. L+ (-50 V)	Typ. L+ (-50 V)	Typ. L+ (-50 V)
Controlling a digital input	Yes	Yes	Yes
Switching capacity of the outputs
? with resistive load, max.	2 A	0.5 A	0.5 A
? on lamp load, max.	10 W	5 W	5 W
Load resistance range
? lower limit	12 ?	48 ?	48 ?
? upper limit	3 400 ?	12 k?	12 k?
Output current
? for signal "1" rated value	2 A	0.5 A	0.5 A
? for signal "0" residual current, max.	0.1 mA		0.1 mA
Output delay with resistive load
? "0" to "1", max.	50 µs	50 µs	50 µs
? "1" to "0", max.	100 µs	100 µs	100 µs
Parallel switching of two outputs
? for uprating	No	No	No
? for redundant control of a load	Yes	Yes	Yes
Switching frequency
? with resistive load, max.	100 Hz	100 Hz	100 Hz
? with inductive load, max.	2 Hz	2 Hz	2 Hz
? on lamp load, max.	10 Hz	10 Hz	10 Hz
Total current of the outputs
? Current per module, max.	8 A		8 A
Cable length
? shielded, max.	1 000 m	1 000 m	1 000 m
? unshielded, max.	200 m	200 m	200 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes		Yes
Interrupts/diagnostics/status information
Substitute values connectable	Yes		Yes
Alarms
? Diagnostic alarm	Yes		Yes
Diagnostic messages
? Monitoring the supply voltage	Yes	Yes	Yes
? Wire-break	Yes	Yes	Yes
? Short-circuit	Yes	Yes	Yes
? Group error		Yes
Diagnostics indication LED
? Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED		Yes; green PWR LED
? Channel status display	Yes; Green LED		Yes; Green LED
? for module diagnostics	Yes; green/red DIAG LED		Yes; green/red DIAG LED
Potential separation
Potential separation channels
? between the channels and backplane bus	Yes		Yes
Isolation
Isolation tested with	707 V DC	707 V DC	707 V DC
Highest safety class achievable in safety mode
? Performance level according to ISO 13849-1	d		d
? SIL acc. to IEC 61508	2		2
Ambient conditions
Ambient temperature during operation
? horizontal installation, min.	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C
? horizontal installation, max.	70 °C; = Tmax; > +60 °C number of simultaneously controllable outputs max. 2 x 0.25 A or max. 4 x 0.125 A, max. total current 0.5 A	70 °C; = Tmax; > +60 °C max. total current 1.0 A	70 °C; = Tmax; > +60 °C max. total current 1.0 A
? vertical installation, min.	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C
? vertical installation, max.	50 °C; = Tmax	50 °C; = Tmax	50 °C; = Tmax
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width	15 mm	15 mm	15 mm
Height		73 mm
Depth		58 mm
Weights
Weight, approx.	30 g	28 g	28 g

Article number	6AG1132-6BF00-7CA0	6AG1132-6GD50-2BA0
	SIPLUS ET 200SP DQ 8X24VDC/0,5A HF	SIPLUS ET 200SP RQ 4X24VDC/2A CO ST
General information
Product type designation	DQ 8x24VDC/0.5A HF	RQ 4x24VUC/2A CO ST
Product function
? I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Engineering with
? STEP 7 TIA Portal configurable/integrated as of version	V13 / V13	V13 / V13
? STEP 7 configurable/integrated as of version	V5.5 SP3 / -	V5.5 SP3 / -
? PCS 7 configurable/integrated as of version	V8.1 SP1
? PROFIBUS as of GSD version/GSD revision	GSD Revision 5	GSD Revision 5
? PROFINET as of GSD version/GSD revision	GSDML V2.3	GSDML V2.3
Operating mode
? DQ	Yes	Yes
? DQ with energy-saving function	No	No
? PWM	No	No
? Oversampling	No	No
? MSO	Yes	No
Supply voltage
Type of supply voltage	DC	DC
Rated value (DC)	24 V	24 V
Reverse polarity protection	Yes
Digital outputs
Type of digital output		Relays
Number of digital outputs	8	4
Current-sinking	No
Current-sourcing	Yes
Digital outputs, parameterizable	Yes
Short-circuit protection		No
Limitation of inductive shutdown voltage to	Typ. L+ (-50 V)
Controlling a digital input	Yes
Switching capacity of the outputs
? with resistive load, max.	0.5 A
? on lamp load, max.	5 W
Load resistance range
? lower limit	48 ?
? upper limit	12 k?
Output current
? for signal "1" rated value	0.5 A
? for signal "0" residual current, max.	0.1 mA
Output delay with resistive load
? "0" to "1", typ.	50 µs
? "1" to "0", typ.	100 µs
Parallel switching of two outputs
? for uprating	No
? for redundant control of a load	Yes
Switching frequency
? with resistive load, max.	100 Hz	2 Hz
? with inductive load, max.	2 Hz
? on lamp load, max.	10 Hz
Total current of the outputs
? Current per channel, max.	0.5 A	2 A
? Current per module, max.	4 A	8 A
Total current of the outputs (per module)
horizontal installation
— up to 60 °C, max.	4 A	8 A
vertical installation
— up to 60 °C, max.	4 A	8 A
Relay outputs
? Number of relay outputs		4
? Rated supply voltage of relay coil L+ (DC)		24 V
? Current consumption of relays (coil current of all relays), max.		40 mA
Switching capacity of contacts
— with resistive load, max.		2 A
— Thermal continuous current, max.		2 A
— Switching current, min.		1 mA; 5 V DC
— Rated switching voltage (DC)		24 V
— Rated switching voltage (AC)		24 V
Cable length
? shielded, max.	1 000 m	1 000 m
? unshielded, max.	600 m	200 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes	No
Execution and activation time (TCO), min.	48 µs
Bus cycle time (TDP), min.	500 µs
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes
Substitute values connectable	Yes	Yes
Alarms
? Diagnostic alarm	Yes	Yes
Diagnostic messages
? Monitoring the supply voltage	Yes	Yes
? Wire-break	Yes; channel by channel	No
? Short-circuit	Yes; channel by channel	No
? Group error	Yes	Yes
Diagnostics indication LED
? Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED	Yes; green PWR LED
? Channel status display	Yes; Green LED	Yes; Green LED
? for channel diagnostics	Yes; Red LED	No
? for module diagnostics	Yes; green/red DIAG LED	Yes; green/red DIAG LED
Potential separation
Potential separation channels
? between the channels and backplane bus	Yes	Yes
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)
Ambient conditions
Ambient temperature during operation
? horizontal installation, min.	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C
? horizontal installation, max.	70 °C; = Tmax; > +60 °C max. total current 1.0 A	60 °C; = Tmax
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width	15 mm	15 mm
Weights
Weight, approx.	30 g	30 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания