SIPLUS interface modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS interface modules

| | | | | |

SIPLUS interface modules

Article number	6AG1155-6AA00-7BN0	6AG1155-6AU00-4CN0	6AG1155-6BA00-7CN0
	SIPLUS ET 200SP IM155-6PN ST	SIPLUS ET 200SP IM155-6PN HF	SIPLUS ET 200SP IM155-6DP HF
General information
Product type designation	IM 155-6 PN ST with BA 2xRJ45 and server module	IM 155-6 PN HF with server module	IM155-6DP HF with PROFIBUS connector and server module
Product function
? I&M data		Yes; I&M0 to I&M4	Yes; I&M0 to I&M3
Engineering with
? STEP 7 TIA Portal configurable/integrated as of version		V13 SP1
? STEP 7 configurable/integrated as of version		V5.5 SP4 and higher	V5.5 SP3 / -
? PROFIBUS as of GSD version/GSD revision			GSD as of Revision 5
? PROFINET as of GSD version/GSD revision		V2.3 / -
Supply voltage
Type of supply voltage	DC	DC	DC
Rated value (DC)		24 V	24 V
Reverse polarity protection		Yes	Yes
Mains buffering
? Mains/voltage failure stored energy time		5 ms	5 ms
Hardware configuration
Rack
? Modules per rack, max.		64; + 16 ET 200AL modules
Interfaces
Number of PROFINET interfaces		1
Number of PROFIBUS interfaces			1
1. Interface
Interface types
? Number of ports		2
? integrated switch		Yes
? RS 485			Yes
? BusAdapter (PROFINET)		Yes; Applicable BusAdapter: BA 2x RJ45, BA 2x FC, BA 2x SCRJ (as from FS03)
? Output current of the interface, max.			90 mA
Functionality
? PROFINET IO Device		Yes
? PROFIBUS DP slave			Yes
? Media redundancy		Yes; As MRP or MRPD client; max. 50 or 30 devices in the ring
Interface types
RJ 45 (Ethernet)
? Transmission procedure		PROFINET with 100 Mbit/s full duplex (100BASE-TX)
? 10 Mbps		Yes; for Ethernet services
? 100 Mbps		Yes; PROFINET with 100 Mbit/s full duplex (100BASE-TX)
? Autonegotiation		Yes
? Autocrossing		Yes
RS 485
? Transmission rate, max.			12 Mbit/s
PROFINET IO Device
Services
— Isochronous mode		Yes; Bus cycle time: min. 250 µs
— Open IE communication		Yes
— IRT		Yes; 250 ?s, 500 ?s, 1 ms, 2 ms, 4 ms additionally with IRT with high performance: 250 µs to 4 ms in 125 µs frame
— MRP		Yes
— MRPD		Yes
— PROFINET system redundancy		Yes; NAP S2
— PROFIenergy		Yes
— Prioritized startup		Yes
— Shared device		Yes
— Number of IO Controllers with shared device, max.		4
Open IE communication
? TCP/IP	Yes	Yes
? SNMP		Yes; MIB2, LLDP-MIBm, MRP-MIB
? LLDP		Yes
PROFIBUS
Services
— SYNC capability			Yes
— FREEZE capability			Yes
— DPV0			No
— DPV1			Yes
Isochronous mode
Isochronous operation (application synchronized up to terminal)		Yes
Equidistance		Yes
shortest clock pulse		250 µs
max. cycle		4 ms
Bus cycle time (TDP), min.		250 µs
Interrupts/diagnostics/status information
Status indicator		Yes	Yes
Alarms	Yes	Yes	Yes
Diagnostic functions	Yes	Yes	Yes
Diagnostics indication LED
? RUN LED		Yes; Green LED	Yes; Green LED
? ERROR LED		Yes; Red LED	Yes; Red LED
? MAINT LED		Yes; yellow LED	Yes; yellow LED
? Monitoring of the supply voltage (PWR-LED)		Yes; Green LED	Yes; green PWR LED
? Connection display LINK TX/RX		Yes; 2x green LED
? Connection display DP			Yes; Green DP LED
Isolation
Isolation tested with	707 V DC between supply voltage and electronics; 1 500 V AC between Ethernet and electronics	707 V DC between supply voltage and electronics (type test); 1 500 V AC between Ethernet and electronics (type test)	707 V DC (type test)
Standards, approvals, certificates
Network loading class		3
Security level		According to Security Level 1 Test Cases V1.1.1
Ambient conditions
Ambient temperature during operation
? horizontal installation, min.	-40 °C; = Tmin; Startup @ -25 °C	0 °C	-40 °C; = Tmin; Startup @ -25 °C
? horizontal installation, max.	70 °C; = Tmax	60 °C	70 °C; = Tmax
? vertical installation, min.	-40 °C; = Tmin; Startup @ -25 °C	0 °C	-40 °C; = Tmin; Startup @ -25 °C
? vertical installation, max.	50 °C; = Tmax	50 °C	50 °C; = Tmax
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width	50 mm	50 mm	50 mm
Height	117 mm	117 mm	117 mm
Depth	74 mm	74 mm	74 mm
Weights
Weight, approx.	191 g; IM155PN ST with BA 2x RJ45 (mounted)	147 g; without BusAdapter	150 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания