FSA to FSC: 200 … 240 V 1 AC/3 AC ±10 % 380 … 480 V 3 AC ±10 %
FSD to FSF: 200 ... 240 V 3 AC -20 % ... +10 % 380 ... 480 V 3 AC -20 % ... +10 % 500 ... 690 V 3 AC -20 % .... +10 %
380 ... 480 V 3 AC ±10 %
380 ... 480 V 3 AC ±10 %
Grid requirement Short-circuit power RSC
>100
>25
200 V: With RSC >50 it is advisable for FSA to FSC to install a line reactor, or alternatively, to select a Power Module with the next-higher power rating.
400 V: With RSC >100 it is advisable to install a line reactor, or alternatively, to select a Power Module with the next-higher power rating.
>25
A line reactor is recommended with RSC >100
>100
Input frequency
47 ... 63 Hz
Output frequency
Control mode V/f
0 ... 550 Hz
Control type Vector
0 ... 240 Hz
Pulse frequency
4 kHz
For higher pulse frequencies, see derating data
200 V: 4 kHz
400 V: 2 kHz
690 V: 2 kHz
For higher pulse frequencies, see derating data
2 kHz
For higher pulse frequencies, see derating data
4 kHz
For higher pulse frequencies, see derating data
Power factor ?
0.9
0.7
FSD to FSF: - 200 V and 400 V: 0.95 - 690 V: 0.9
0.7 ... 0.85
0.9
Offset factor cos ?
0.95
FSA to FSC: 0.95
FSD to FSF: 0.99
0.95
0.95 capacitive
Inverter efficiency
86 ... 98 %
92 ... 95 %
95 ... 98 %
95 ... 97 %
Output voltage, max.
In % of input voltage
95%
95%
95%
87%
Overload capability
Low overload (LO)
Note:
When the overload capability is used, the base-load current IL is not reduced.
FSA to FSC: 1.5 ? base-load current IL (i.e. 150 % overload) for 3 s plus 1.1 ? base-load current IL (i.e. 110 % overload) for 57 s within a cycle time of 300 s
FSD to FSF: 1.1 ? base-load current IL (i.e. 110 % overload) for 60 s within a cycle time of 300 s
1.5 ? base-load current IL (i.e. 150 % overload) for 3 s plus 1.1 ? base-load current IL (i.e. 110 % overload) for 57 s within a cycle time of 300 s
90 kW (LO): 1.5 ? base-load current IL (i. e. 150 % overload) for 3 s plus 1.1 ? base-load current IL (i. e. 110 % overload) for 57 s within a cycle time of 300 s
110 kW and higher (LO): 1.5 ? base-load current IL (i. e. 150 % overload) for 1 s plus 1.1 ? base-load current IL (i. e. 110 % overload) for 59 s within a cycle time of 300 s
1.5 ? base-load current IL (i.e. 150 % overload) for 3 s plus 1.1 ? base-load current IL (i.e. 110 % overload) for 57 s within a cycle time of 300 s
High overload (HO)
Note:
When the overload capability is used, the base-load current IH is not reduced.
FSA to FSC: 2 ? base-load current IH (i.e. 200 % overload) for 3 s plus 1.5 ? base-load current IH (i.e. 150 % overload) for 57 s within a cycle time of 300 s
FSD to FSF: 1.5 ? base-load current IH (i.e. 150 % overload) for 60 s within a cycle time of 300 s
2 ? base-load current IH (i.e. 200 % overload) for 3 s plus 1.5 ? base-load current IH (i.e. 150 % overload) for 57 s within a cycle time of 300 s
Up to 75 kW (HO): 2 ? base-load current IH (i. e. 200 % overload) for 3 s plus 1.5 ? base-load current IH (i. e. 150 % overload) for 57 s within a cycle time of 300 s
90 kW and higher (HO): 1.6 ? base-load current IH (i.e. 160 % overload) for 3 s plus 1.36 ? base-load current IH (i.e. 136 % overload) for 57 s within a cycle time of 300 s
2 ? base-load current IH (i.e. 200 % overload) for 3 s plus 1.5 ? base-load current IH (i.e. 150 % overload) for 57 s within a cycle time of 300 s
Possible braking methods
DC braking
Compound braking
DC braking
Compound braking
Dynamic braking with integrated braking chopper
DC braking
Compound braking
Dynamic braking with integrated braking chopper (optional for frame size FSGX)
Regenerative feedback in generator mode
Degree of protection
IP20 (standard or push-through)
IP20 (standard or push-through)
IP20
IP20
Operating temperature
Low overload (LO)
Frame sizes FSA to FSC: -10 ... +40 °C (14 ... 104 °F) without derating >40 ... 60 °C (>104 ... 140 °F) see derating characteristics
Frame sizes FSD to FSF: 0 ... 40 °C (32 … 104 °F) without derating >40 ... 60 °C (>104 ... 140 °F) see derating characteristics
Frame sizes FSA to FSC: -10 ... +40 °C (14 ... 104 °F) without derating >40 ... 60 °C (>104 ... 140 °F) see derating characteristics
Frame sizes FSD to FSF: -20 ... +40 °C (-4 ... +104 °F) without derating >40 ... 60 °C (>104 ... 140 °F) see derating characteristics
Frame sizes FSD to FSF: 0 ... 40 °C (32 … 104 °F) without derating >40 ... 60 °C (>104 ... 140 °F) see derating characteristics
Frame size FSGX: 0 ... 40 °C (32 ... 104 °F) without derating >40 ... 55 °C (>104 ... 131 °F) see derating characteristics
0 ... 40 °C (32 ... 104 °F) without derating >40 ... 60 °C (>104 ... 140 °F) see derating characteristics
High overload (HO)
Frame sizes FSA to FSC: -10 ... +50 °C (14 ... 122 °F) without derating >50 ... 60 °C (>122 ... 140 °F) see derating characteristics
Frame sizes FSD to FSF: 0 ... 50 °C (32 ... 122 °F) without derating >50 ... 60 °C (>122 ... 140 °F) see derating characteristics
Frame sizes FSA to FSC: -10 ... +50 °C (14 ... 122 °F) without derating >50 ... 60 °C (>122 ... 140 °F) see derating characteristics
Frame sizes FSD to FSF: -20 ... +50 °C (-4 ... +122 °F) without derating >50 ... 60 °C (>122 ... 140 °F) see derating characteristics
Frame sizes FSD to FSF: 0 ... 50 °C (32 ... 122 °F) without derating >50 ... 60 °C (>122 ... 140 °F) see derating characteristics
Frame size FSGX: 0 ... 40 °C (32 ... 104 °F) without derating >40 ... 55 °C (>104 ... 131 °F) see derating characteristics
0 ... 50 °C (32 ... 122 °F) without derating >50 ... 60 °C (>122 ... 140 °F) see derating characteristics
Storage temperature
-40 ... +70 °C (-40 ... +158 °F)
Relative humidity
<95 % RH, condensation not permissible
Cooling
Power units with increased air cooling using integrated fans
Internal air cooling, power units with increased air cooling by built-in fans
Internal air cooling, power units with increased air cooling by built-in fans
Internal air cooling, power units with increased air cooling by built-in fans
Installation altitude
Up to 1000 m (3281 ft.) above sea level without derating, > 1000 m (3281 ft.) see derating characteristics
4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate.
5) Max. motor cable length 25 m (82 ft) (shielded) for PM230 Power Modules with integrated line filter to maintain the limit values acc. to EN 61800?3 Category C2. With unshielded cables, Category C2 is not achieved.
Line voltage 380 ... 480 V 3 AC
PM230 Power Modules degree of protection IP20 standard variant
Without integrated line filter
6SL3210-1NE15-8UL1
6SL3210-1NE17-7UL1
6SL3210-1NE21-0UL1
6SL3210-1NE21-3UL1
6SL3210-1NE21-8UL1
With integrated line filter class A
6SL3210-1NE15-8AL1
6SL3210-1NE17-7AL1
6SL3210-1NE21-0AL1
6SL3210-1NE21-3AL1
6SL3210-1NE21-8AL1
Output current
at 50 Hz 400 V 3 AC
Rated current Irated 1)
A
5.9
7.7
10.2
13.2
18
Base-load current IL1)
A
5.9
7.7
10.2
13.2
18
Base-load current IH2)
A
4.1
5.9
7.7
10.2
13.2
Maximum current Imax
A
8.9
11.8
15.4
20.4
27
Rated power
Based on IL
kW (hp)
2.2 (3)
3 (4)
4 (5)
5.5 (7.5)
7.5 (10)
Based on IH
kW (hp)
1.5 (2)
2.2 (3)
3 (4)
4 (5)
5.5 (7.5)
Rated pulse frequency
kHz
4
4
4
4
4
Efficiency ?
%
96
96
97
97
97
Power loss 3)
At rated current
kW
0.078
0.102
0.13
0.165
0.224
Cooling air requirement
m3/s (ft3/s)
0.005 (0.18)
0.005 (0.18)
0.009 (0.32)
0.009 (0.32)
0.009 (0.32)
Sound pressure level
LpA (1 m)
dB
<50
<50
<62
<62
<62
24 V DC power supply
for Control Unit
A
1
1
1
1
1
Input current 4)
Rated current
A
6.1
8
11
14
19
Based on IH
A
4.2
6.1
8
11
14
Line supply connection
U1/L1, V1/L2, W1/L3
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Conductor cross-section
mm2
1.5 ... 2.5
1.5 ... 2.5
1.5 ... 6
1.5 ... 6
1.5 ... 6
Motor connection
U2, V2, W2
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Conductor cross-section
mm2
1.5 ... 2.5
1.5 ... 2.5
1.5 ... 6
1.5 ... 6
1.5 ... 6
Motor cable length, max. 5)
Shielded
m (ft)
25 (82)
25 (82)
25 (82)
25 (82)
25 (82)
Unshielded
m (ft)
100 (328)
100 (328)
100 (328)
100 (328)
100 (328)
Degree of protection
IP20
IP20
IP20
IP20
IP20
Dimensions
Width
mm (in)
73 (2.87)
73 (2.87)
100 (3.94)
100 (3.94)
100 (3.94)
Height
mm (in)
196 (7.72)
196 (7.72)
292 (11.5)
292 (11.5)
292 (11.5)
Depth
Without operator panel
mm (in)
165 (6.50)
165 (6.50)
165 (6.50)
165 (6.50)
165 (6.50)
With operator panel, max.
mm (in)
245 (9.65)
245 (9.65)
245 (9.65)
245 (9.65)
245 (9.65)
Frame size
FSA
FSA
FSB
FSB
FSB
Weight, approx.
Without integrated line filter
kg (lb)
1.4 (3.09)
1.4 (3.09)
2.8 (6.17)
2.8 (6.17)
2.8 (6.17)
With integrated line filter
kg (lb)
1.6 (3.53)
1.6 (3.53)
3 (4.02)
3 (4.02)
3 (4.02)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate.
5) Max. motor cable length 25 m (82 ft) (shielded) for PM230 Power Modules with integrated line filter to maintain the limit values acc. to EN 61800?3 Category C2. With unshielded cables, Category C2 is not achieved.
Line voltage 380 ... 480 V 3 AC
PM230 Power Modules degree of protection IP20 standard variant
Without integrated line filter
6SL3210- 1NE22-6UL1
6SL3210- 1NE23-2UL1
6SL3210- 1NE23-8UL1
6SL3210- 1NE24-5UL0
6SL3210- 1NE26-0UL0
With integrated line filter class A
6SL3210- 1NE22-6AL1
6SL3210- 1NE23-2AL1
6SL3210- 1NE23-8AL1
6SL3210- 1NE24-5AL0
6SL3210- 1NE26-0AL0
Output current
at 50 Hz 400 V 3 AC
Rated current Irated 1)
A
26
32
38
45
60
Base-load current IL1)
A
26
32
38
45
60
Base-load current IH2)
A
18
26
32
38
45
Maximum current Imax
A
39
52
64
57
67
Rated power
Based on IL
kW (hp)
11 (10)
15 (15)
18.5 (20)
22 (25)
30 (30)
Based on IH
kW (hp)
7.5 (10)
11 (10)
15 (15)
18.5 (20)
22 (25)
Rated pulse frequency
kHz
4
4
4
4
4
Efficiency ?
%
97
97
98
98
97
Power loss 3)
At rated current
kW
0.291
0.355
0.423
0.539
0.726
Cooling air requirement
m3/s (ft3/s)
0.019 (0.7)
0.019 (0.7)
0.019 (0.7)
0.08 (2.8)
0.08 (2.8)
Sound pressure level
LpA (1 m)
dB
<65
<65
<65
<60
<60
24 V DC power supply
for Control Unit
A
1
1
1
1
1
Input current 4)
Rated current
A
27
33
39
42
56
Based on IH
A
19
27
33
36
42
Line supply connection
U1/L1, V1/L2, W1/L3
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Screw-type terminals, plug-in
M6 screw studs
M6 screw studs
Conductor cross-section
mm2
6 ... 16
6 ... 16
6 ... 16
16 ... 35
16 ... 35
Motor connection
U2, V2, W2
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Screw-type terminals, plug-in
M6 screw studs
M6 screw studs
Conductor cross-section
mm2
6 ... 16
6 ... 16
6 ... 16
16 ... 35
16 ... 35
Motor cable length, max. 5)
Shielded
m (ft)
25 (82)
25 (82)
25 (82)
25 (82)
25 (82)
Unshielded
m (ft)
100 (328)
100 (328)
100 (328)
100 (328)
100 (328)
Degree of protection
IP20
IP20
IP20
IP20
IP20
Dimensions
Width
mm (in)
140 (5.51)
140 (5.51)
140 (5.51)
275 (10.83)
275 (10.83)
Height
Without integrated line filter
mm (in)
355 (13.98)
355 (13.98)
355 (13.98)
419 (16.50)
419 (16.50)
With integrated line filter
mm (in)
355 (13.98)
355 (13.98)
355 (13.98)
512 (20.16)
512 (20.16)
Depth
Without operator panel
mm (in)
165 (6.50)
165 (6.50)
165 (6.50)
204 (8.03)
204 (8.03)
With operator panel, max.
mm (in)
245 (9.65)
245 (9.65)
245 (9.65)
275 (10.83)
275 (10.83)
Frame size
FSC
FSC
FSC
FSD
FSD
Weight, approx.
Without integrated line filter
kg (lb)
4.5 (9.92)
4.5 (9.92)
4.5 (9.92)
11 (24.3)
11 (24.3)
With integrated line filter
kg (lb)
5.1 (11.3)
5.1 (11.3)
5.1 (11.3)
14 (30.9)
14 (30.9)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate.
5) Max. motor cable length 25 m (82 ft) (shielded) for PM230 Power Modules with integrated line filter to maintain the limit values acc. to EN 61800?3 Category C2. With unshielded cables, Category C2 is not achieved.
Line voltage 380 ... 480 V 3 AC
PM230 Power Modules degree of protection IP20 standard variant
Without integrated line filter
6SL3210-1NE27-5UL0
6SL3210-1NE28-8UL0
6SL3210-1NE31-1UL0
6SL3210-1NE31-5UL0
With integrated line filter class A
6SL3210-1NE27-5AL0
6SL3210-1NE28-8AL0
6SL3210-1NE31-1AL0
6SL3210-1NE31-5AL0
Output current
at 50 Hz 400 V 3 AC
Rated current Irated 1)
A
75
90
110
145
Base-load current IL1)
A
75
90
110
145
Base-load current IH2)
A
60
75
90
110
Maximum current Imax
A
90
112
135
165
Rated power
Based on IL
kW (hp)
37 (40)
45 (50)
55 (60)
75 (75)
Based on IH
kW (hp)
30 (30)
37 (40)
45 (50)
55 (60)
Rated pulse frequency
kHz
4
4
4
4
Efficiency ?
%
97
97
97
97
Power loss 3)
At rated current
kW
0.791
0.976
1.237
1.69
Cooling air requirement
m3/s (ft3/s)
0.08 (2.8)
0.08 (2.8)
0.15 (5.3)
0.15 (5.3)
Sound pressure level
LpA (1 m)
dB
<60
<60
<60
<60
24 V DC power supply
for Control Unit
A
1
1
1
1
Input current 4)
Rated current
A
70
84
102
135
Based on IH
A
56
70
84
102
Line supply connection
U1/L1, V1/L2, W1/L3
M6 screw studs
M6 screw studs
M8 screw studs
M8 screw studs
Conductor cross-section
mm2
25 ... 50
25 ... 50
35 ... 120
35 ... 120
Motor connection
U2, V2, W2
M6 screw studs
M6 screw studs
M8 screw studs
M8 screw studs
Conductor cross-section
mm2
25 ... 50
25 ... 50
35 ... 120
35 ... 120
Motor cable length, max. 5)
Shielded
m (ft)
25 (82)
25 (82)
25 (82)
25 (82)
Unshielded
m (ft)
100 (328)
100 (328)
100 (328)
100 (328)
Degree of protection
IP20
IP20
IP20
IP20
Dimensions
Width
mm (in)
275 (10.83)
275 (10.83)
350 (13.78)
350 (13.78)
Height
Without integrated line filter
mm (in)
499 (19.65)
499 (19.65)
634 (24.96)
634 (24.96)
With integrated line filter
mm (in)
635 (25.0)
635 (25.0)
934 (36.77)
934 (36.77)
Depth
Without operator panel
mm (in)
204 (8.03)
204 (8.03)
316 (12.44)
316 (12.44)
With operator panel, max.
mm (in)
275 (10.83)
275 (10.83)
387 (15.24)
387 (15.24)
Frame size
FSE
FSE
FSF
FSF
Weight, approx.
Without integrated line filter
kg (lb)
15 (33.1)
15 (33.1)
34 (75)
34 (75)
With integrated line filter
kg (lb)
22 (48.5)
22 (48.5)
46 (101)
46 (101)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate.
5) Max. motor cable length 25 m (82 ft) (shielded) for PM230 Power Modules with integrated line filter to maintain the limit values acc. to EN 61800?3 Category C2. With unshielded cables, Category C2 is not achieved.
PM230 Power Modules degree of protection IP20 push-through variant
Line voltage 380 ... 480 V 3 AC
PM230 Power Modules degree of protection IP20 push-through variant
Without integrated line filter
6SL3211-1NE17-7UL1
6SL3211-1NE21-8UL1
6SL3211-1NE23-8UL1
With integrated line filter class A
6SL3211-1NE17-7AL1
6SL3211-1NE21-8AL1
6SL3211-1NE23-8AL1
Output current
at 50 Hz 400 V 3 AC
Rated current Irated 1)
A
7.7
18
38
Base-load current IL1)
A
7.7
18
38
Base-load current IH2)
A
5.9
13.2
32
Maximum current Imax
A
11.8
27
64
Rated power
Based on IL
kW (hp)
3 (4)
7.5 (10)
18.5 (20)
Based on IH
kW (hp)
2.2 (3)
5.5 (7.5)
15 (15)
Rated pulse frequency
kHz
4
4
4
Efficiency ?
%
96
97
98
Power loss 3)
At rated current
kW
0.102
0.224
0.423
Cooling air requirement
m3/s (ft3/s)
0.005 (0.18)
0.009 (0.32)
0.019 (0.7)
Sound pressure level
LpA (1 m)
dB
<56
<62
<65
24 V DC power supply
for Control Unit
A
1
1
1
Input current 4)
Rated current
A
8
19
39
Based on IH
A
6.1
14
33
Line supply connection
U1/L1, V1/L2, W1/L3
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Conductor cross-section
mm2
1.5 ... 2.5
4 ... 6
6 ... 16
Motor connection
U2, V2, W2
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Conductor cross-section
mm2
1 ... 2.5
4 ... 6
10 ... 16
Motor cable length, max. 5)
Shielded
m (ft)
25 (82)
25 (82)
25 (82)
Unshielded
m (ft)
100 (328)
100 (328)
100 (328)
Degree of protection
IP20
IP20
IP20
Dimensions
Width
mm (in)
126 (4.96)
154 (6.06)
200 (7.87)
Height
mm (in)
238 (9.37)
345 (13.58)
411 (16.18)
Depth
Without operator panel
mm (in)
171 (6.73)
171 (6.73)
171 (6.73)
With operator panel, max.
mm (in)
251 (9.88)
251 (9.88)
251 (9.88)
Frame size
FSA
FSB
FSC
Weight, approx.
With integrated line filter
Without integrated line filter
kg (lb)
1.7 (3.75)
3.4 (7.50)
5.4 (11.9)
With integrated line filter
kg (lb)
1.9 (4.19)
3.6 (7.94)
6 (13.2)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate.
5) Max. motor cable length 25 m (82 ft) (shielded) for PM230 Power Modules with integrated line filter to maintain the limit values acc. to EN 61800?3 Category C2. With unshielded cables, Category C2 is not achieved.
PM240?2 Power Modules standard variant
Line voltage 200 ... 240 V 1 AC/3 AC
PM240?2 Power Modules standard variant
Without integrated line filter
6SL3210-1PB13-0UL0
6SL3210-1PB13-8UL0
6SL3210-1PB15-5UL0
6SL3210-1PB17-4UL0
6SL3210-1PB21-0UL0
With integrated line filter class A
6SL3210-1PB13-0AL0
6SL3210-1PB13-8AL0
6SL3210-1PB15-5AL0
6SL3210-1PB17-4AL0
6SL3210-1PB21-0AL0
Output current
at 50 Hz 230 V 1 AC
Rated current Irated 1)
A
3.2
4.2
6
7.4
10.4
Base-load current IL1)
A
3.2
4.2
6
7.4
10.4
Base-load current IH2)
A
2.3
3.2
4.2
6
7.4
Maximum current Imax
A
4.8
6.4
9
12
15.6
Rated power
Based on IL
kW (hp)
0.55 (0.75)
0.75 (1)
1.1 (1.5)
1.5 (2)
2.2 (3)
Based on IH
kW (hp)
0.37 (0.5)
0.55 (0.75)
0.75 (1)
1.1 (1.5)
1.5 (2)
Rated pulse frequency
kHz
4
4
4
4
4
Efficiency ?
%
>96
>96
>96
>96
>96
Power loss 3)
At rated current
kW
0.04
0.04
0.05
0.07
0.12
Cooling air requirement
m3/s (ft3/s)
0.005 (0.18)
0.005 (0.18)
0.0092 (0.325)
0.0092 (0.325)
0.0092 (0.325)
Sound pressure level
LpA (1 m)
dB
<50
<50
<62
<62
<62
24 V DC power supply
for Control Unit
A
1
1
1
1
1
Input current 4)
Rated current 1 AC/3 AC
A
7.5/4.3
9.6/5.5
13.5/7.8
18.1/10.5
24/13.9
Based on IH 1 AC/3 AC
A
6.6/3.8
8.4/4.8
11.8/6.8
15.8/9.1
20.9/12.1
Line supply connection
U1/L1, V1/L2, W1/L3
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Conductor cross-section
mm2
1.5 ... 2.5
1.5 ... 2.5
1.5 ... 6
1.5 ... 6
1.5 ... 6
Motor connection
U2, V2, W2
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Conductor cross-section
mm2
1.5 ... 2.5
1.5 ... 2.5
1.5 ... 6
1.5 ... 6
1.5 ... 6
PE connection
Included in terminal connector
Included in terminal connector
Included in terminal connector
Included in terminal connector
Included in terminal connector
Motor cable length, max.
Shielded
m (ft)
50 (164)
50 (164)
50 (164)
50 (164)
50 (164)
Unshielded
m (ft)
100 (328)
100 (328)
100 (328)
100 (328)
100 (328)
Degree of protection
IP20
IP20
IP20
IP20
IP20
Dimensions
Width
mm (in)
73 (2.87)
73 (2.87)
100 (3.94)
100 (3.94)
100 (3.94)
Height
mm (in)
196 (7.72)
196 (7.72)
291 (11.46)
291 (11.46)
291 (11.46)
Depth
Without operator panel
mm (in)
165 (6.50)
165 (6.50)
165 (6.50)
165 (6.50)
165 (6.50)
With operator panel, max.
mm (in)
248 (9.76)
248 (9.76)
248 (9.76)
248 (9.76)
248 (9.76)
Frame size
FSA
FSA
FSB
FSB
FSB
Weight, approx.
Without integrated line filter
kg (lb)
1.4 (3.09)
1.4 (3.09)
2.9 (6.39)
2.9 (6.39)
2.9 (6.39)
With integrated line filter
kg (lb)
1.6 (3.53)
1.6 (3.53)
3.1 (6.84)
3.1 (6.84)
3.1 (6.84)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
4) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. The current values are specified on the rating plate of the Power Module.
Line voltage 200 ... 240 V 1 AC/3 AC
PM240?2 Power Modules standard variant
Without integrated line filter
6SL3210-1PB21-4UL0
6SL3210-1PB21-8UL0
With integrated line filter class A
6SL3210-1PB21-4AL0
6SL3210-1PB21-8AL0
Output current
at 50 Hz 230 V 1 AC
Rated current Irated 1)
A
13.6
17.5
Base-load current IL1)
A
13.6
17.5
Base-load current IH2)
A
10.4
13.6
Maximum current Imax
A
20.8
27.2
Rated power
Based on IL
kW (hp)
3 (4)
4 (5)
Based on IH
kW (hp)
2.2 (3)
3 (4)
Rated pulse frequency
kHz
4
4
Efficiency ?
%
>96
>96
Power loss 3)
At rated current
kW
0.14
0.18
Cooling air requirement
m3/s (ft3/s)
0.0185 (0.65)
0.0185 (0.65)
Sound pressure level
LpA (1 m)
dB
<65
<65
24 V DC power supply
for Control Unit
A
1
1
Input current 4)
Rated current 1 AC/3 AC
A
35.9/20.7
43/24.8
Based on IH 1 AC/3 AC
A
31.3/18.1
37.5/21.7
Line supply connection
U1/L1, V1/L2, W1/L3
Terminal connector
Terminal connector
Conductor cross-section
mm2
6 ... 16
6 ... 16
Motor connection
U2, V2, W2
Terminal connector
Terminal connector
Conductor cross-section
mm2
6 ... 16
6 ... 16
PE connection
Included in terminal connector
Included in terminal connector
Motor cable length, max.
Shielded
m (ft)
50 (164)
50 (164)
Unshielded
m (ft)
100 (328)
100 (328)
Degree of protection
IP20
IP20
Dimensions
Width
mm (in)
140 (5.51)
140 (5.51)
Height
mm (in)
355 (13.98)
355 (13.98)
Depth
Without operator panel
mm (in)
165 (6.50)
165 (6.50)
With operator panel, max.
mm (in)
248 (9.76)
248 (9.76)
Frame size
FSC
FSC
Weight, approx.
Without integrated line filter
kg (lb)
5 (11)
5 (11)
With integrated line filter
kg (lb)
5.2 (11.5)
5.2 (11.5)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
4) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. The current values are specified on the rating plate of the Power Module.
Line voltage 200 ... 240 V 3 AC
PM240?2 Power Modules standard variant
Without integrated line filter
6SL3210-1PC22-2UL0
6SL3210-1PC22-8UL0
6SL3210-1PC24-2UL0
6SL3210-1PC25-4UL0
6SL3210-1PC26-8UL0
With integrated line filter class A
6SL3210-1PC22-2AL0
6SL3210-1PC22-8AL0
–
–
–
Output current
at 50 Hz 230 V 3 AC
Rated current Irated 1)
A
22
28
42
54
68
Base-load current IL1)
A
22
28
42
54
68
Base-load current IH2)
A
17.5
22
35
42
54
Maximum current Imax
A
35
44
70
84
108
Rated power
Based on IL
kW (hp)
5.5 (7.5)
7.5 (10)
11 (10)
15 (15)
18.5 (20)
Based on IH
kW (hp)
4 (5)
5.5 (7.5)
7.5 (10)
11 (10)
15 (15)
Rated pulse frequency
kHz
4
4
4
4
4
Efficiency ?
%
>97
>97
>97
>97
>97
Power loss 3)
At rated current
kW
0.2
0.26
0.42
0.57
0.76
Cooling air requirement
m3/s (ft3/s)
0.0185 (0.65)
0.0185 (0.65)
0.055 (1.9)
0.055 (1.9)
0.055 (1.9)
Sound pressure level
LpA (1 m)
dB
<65
<65
45 ... 65 4)
45 ... 65 4)
45 ... 65 4)
24 V DC power supply
for Control Unit
A
1
1
1
1
1
Input current 5)
Rated current
A
29
37
40
51
64
Based on IH
A
26.2
33
36
43
56
Line supply connection
U1/L1, V1/L2, W1/L3
Terminal connector
Terminal connector
Screw-type terminals
Screw-type terminals
Screw-type terminals
Conductor cross-section
mm2
6 ... 16
6 ... 16
10 ... 35
10 ... 35
10 ... 35
Motor connection
U2, V2, W2
Terminal connector
Terminal connector
Screw-type terminals
Screw-type terminals
Screw-type terminals
Conductor cross-section
mm2
6 ... 16
6 ... 16
10 ... 35
10 ... 35
10 ... 35
PE connection
Included in terminal connector
Included in terminal connector
Screw-type terminals
Screw-type terminals
Screw-type terminals
Motor cable length, max.
Shielded
m (ft)
50 (164)
50 (164)
200 (656)
200 (656)
200 (656)
Unshielded
m (ft)
100 (328)
100 (328)
300 (984)
300 (984)
300 (984)
Degree of protection
IP20
IP20
IP20
IP20
IP20
Dimensions
Width
mm (in)
140 (5.51)
140 (5.51)
200 (7.87)
200 (7.87)
200 (7.87)
Height
mm (in)
355 (13.98)
355 (13.98)
472 (18.58)
472 (18.58)
472 (18.58)
Depth
Without operator panel
mm (in)
165 (6.50)
165 (6.50)
237 (9.33)
237 (9.33)
237 (9.33)
With operator panel, max.
mm (in)
248 (9.76)
248 (9.76)
278 (10.94)
278 (10.94)
278 (10.94)
Frame size
FSC
FSC
FSD
FSD
FSD
Weight, approx.
Without integrated line filter
kg (lb)
5 (11)
5 (11)
17 (37.5)
17 (37.5)
17 (37.5)
With integrated line filter
kg (lb)
5.2 (11.5)
5.2 (11.5)
–
–
–
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
4) Values dependent on ambient temperature and utilization.
5) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1%. The current values are specified on the rating plate of the Power Module.
Line voltage 200 ... 240 V 3 AC
PM240?2 Power Modules standard variant
Without integrated line filter
6SL3210-1PC28-0UL0
6SL3210-1PC31-1UL0
6SL3210-1PC31-3UL0
6SL3210-1PC31-6UL0
6SL3210-1PC31-8UL0
With integrated line filter class A
–
–
–
–
–
Output current
at 50 Hz 230 V 3 AC
Rated current Irated 1)
A
80
104
130
154
178
Base-load current IL1)
A
80
104
130
154
178
Base-load current IH2)
A
68
80
104
130
154
Maximum current Imax
A
136
160
208
260
308
Rated power
Based on IL
kW (hp)
22 (25)
30 (30)
37 (40)
45 (50)
55 (60)
Based on IH
kW (hp)
18.5 (20)
22 (25)
30 (30)
37 (40)
45 (50)
Rated pulse frequency
kHz
4
4
4
4
4
Efficiency ?
%
>97
>97
>97
>97
>97
Power loss 3)
At rated current
kW
0.85
1.2
1.3
1.63
1.98
Cooling air requirement
m3/s (ft3/s)
0.083 (2.9)
0.083 (2.9)
0.153 (5.4)
0.153 (5.4)
0.153 (5.4)
Sound pressure level
LpA (1 m)
dB
44 ... 62 4)
44 ... 62 4)
56 ... 68 4)
56 ... 68 4)
56 ... 68 4)
24 V DC power supply
for Control Unit
A
1
1
1
1
1
Input current 5)
Rated current
A
76
98
126
149
172
Based on IH
A
71
83
110
138
164
Line supply connection
U1/L1, V1/L2, W1/L3
Screw-type terminals
Screw-type terminals
M10 screw stud
M10 screw stud
M10 screw stud
Conductor cross-section
mm2
25 ... 70
25 ... 70
35 ... 2 ? 120
35 ... 2 ? 120
35 ... 2 ? 120
Motor connection
U2, V2, W2
Screw-type terminals
Screw-type terminals
M10 screw stud
M10 screw stud
M10 screw stud
Conductor cross-section
mm2
25 ... 70
25 ... 70
35 ... 2 ? 120
35 ... 2 ? 120
35 ... 2 ? 120
PE connection
Screw-type terminals
Screw-type terminals
M10 screw stud
M10 screw stud
M10 screw stud
Motor cable length, max.
Shielded
m (ft)
200 (656)
200 (656)
300 (984)
300 (984)
300 (984)
Unshielded
m (ft)
300 (984)
300 (984)
450 (1476)
450 (1476)
450 (1476)
Degree of protection
IP20
IP20
IP20
IP20
IP20
Dimensions
Width
mm (in)
275 (10.83)
275 (10.83)
305 (12.01)
305 (12.01)
305 (12.01)
Height
mm (in)
551 (21.69)
551 (21.69)
708 (27.87)
708 (27.87)
708 (27.87)
Depth
Without operator panel
mm (in)
237 (9.33)
237 (9.33)
357 (14.06)
357 (14.06)
357 (14.06)
With operator panel, max.
mm (in)
278 (10.94)
278 (10.94)
398 (15.67)
398 (15.67)
398 (15.67)
Frame size
FSE
FSE
FSF
FSF
FSF
Weight, approx.
Without integrated line filter
kg (lb)
26 (57.3)
26 (57.3)
57 (126)
57 (126)
57 (126)
With integrated line filter
kg (lb)
–
–
–
–
–
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
4) Values dependent on ambient temperature and utilization.
5) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. The current values are specified on the rating plate of the Power Module.
Line voltage 380 ... 480 V 3 AC
PM240?2 Power Modules standard variant
Without integrated line filter
6SL3210-1PE11-8UL1
6SL3210-1PE12-3UL1
6SL3210-1PE13-2UL1
6SL3210-1PE14-3UL1
6SL3210-1PE16-1UL1
6SL3210-1PE18-0UL1
With integrated line filter class A
6SL3210-1PE11-8AL1
6SL3210-1PE12-3AL1
6SL3210-1PE13-2AL1
6SL3210-1PE14-3AL1
6SL3210-1PE16-1AL1
6SL3210-1PE18-0AL1
Output current
at 50 Hz 400 V 3 AC
Rated current Irated 1)
A
1.7
2.2
3.1
4.1
5.9
7.7
Base-load current IL1)
A
1.7
2.2
3.1
4.1
5.9
7.7
Base-load current IH2)
A
1.3
1.7
2.2
3.1
4.1
5.9
Maximum current Imax
A
2.6
3.4
4.7
6.2
8.9
11.8
Rated power
Based on IL
kW (hp)
0.55 (0.75)
0.75 (1)
1.1 (1.5)
1.5 (2)
2.2 (3)
3 (4)
Based on IH
kW (hp)
0.37 (0.5)
0.55 (0.75)
0.75 (1)
1.1 (1.5)
1.5 (2)
2.2 (3)
Rated pulse frequency
kHz
4
4
4
4
4
4
Efficiency ?
%
>96
>96
>96
>96
>96
>96
Power loss 3)
At rated current
kW
0.033
0.038
0.048
0.061
0.085
0.113
Cooling air requirement
m3/s (ft3/s)
0.005 (0.18)
0.005 (0.18)
0.005 (0.18)
0.005 (0.18)
0.005 (0.18)
0.005 (0.18)
Sound pressure level
LpA (1 m)
dB
<50
<50
<50
<50
<50
<50
24 V DC power supply
for Control Unit
A
1
1
1
1
1
1
Input current 4)
Rated current
A
2.3
2.9
4.1
5.5
7.7
10.1
Based on IH
A
2
2.6
3.3
4.7
6.1
8.8
Line supply connection
U1/L1, V1/L2, W1/L3
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Conductor cross-section
mm2
1 ... 2.5
1 ... 2.5
1 ... 2.5
1 ... 2.5
1 ... 2.5
1 ... 2.5
Motor connection
U2, V2, W2
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Conductor cross-section
mm2
1 ... 2.5
1 ... 2.5
1 ... 2.5
1 ... 2.5
1 ... 2.5
1 ... 2.5
PE connection
Included in terminal connector
Included in terminal connector
Included in terminal connector
Included in terminal connector
Included in terminal connector
Included in terminal connector
Motor cable length, max.
Without filter, shielded/unshielded
m (ft)
150/150 (492/492)
150/150 (492/492)
150/150 (492/492)
150/150 (492/492)
150/150 (492/492)
150/150 (492/492)
With integrated filter class A, shielded/unshielded
m (ft)
50/100 (164/328)
50/100 (164/328)
50/100 (164/328)
50/100 (164/328)
50/100 (164/328)
50/100 (164/328)
Degree of protection
IP20
IP20
IP20
IP20
IP20
IP20
Dimensions
Width
mm (in)
73 (2.87)
73 (2.87)
73 (2.87)
73 (2.87)
73 (2.87)
73 (2.87)
Height
mm (in)
196 (7.72)
196 (7.72)
196 (7.72)
196 (7.72)
196 (7.72)
196 (7.72)
Depth
165 (6.50)
165 (6.50)
165 (6.50)
165 (6.50)
165 (6.50)
165 (6.50)
Without operator panel
mm (in)
165 (6.50)
165 (6.50)
165 (6.50)
165 (6.50)
165 (6.50)
165 (6.50)
With operator panel, max.
mm (in)
248 (9.76)
248 (9.76)
248 (9.76)
248 (9.76)
248 (9.76)
248 (9.76)
Frame size
FSA
FSA
FSA
FSA
FSA
FSA
Weight, approx.
Without integrated line filter
kg (lb)
1.4 (3.09)
1.4 (3.09)
1.4 (3.09)
1.4 (3.09)
1.4 (3.09)
1.4 (3.09)
With integrated line filter
kg (lb)
1.5 (3.31)
1.5 (3.31)
1.5 (3.31)
1.5 (3.31)
1.5 (3.31)
1.5 (3.31)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
4) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. The current values are specified on the rating plate of the Power Module.
Line voltage 380 ... 480 V 3 AC
PM240?2 Power Modules standard variant
Without integrated line filter
6SL3210-1PE21-1UL0
6SL3210-1PE21-4UL0
6SL3210-1PE21-8UL0
6SL3210-1PE22-7UL0
6SL3210-1PE23-3UL0
With integrated line filter class A
6SL3210-1PE21-1AL0
6SL3210-1PE21-4AL0
6SL3210-1PE21-8AL0
6SL3210-1PE22-7AL0
6SL3210-1PE23-3AL0
Output current
at 50 Hz 400 V 3 AC
Rated current Irated 1)
A
10.2
13.2
18
26
32
Base-load current IL1)
A
10.2
13.2
18
26
32
Base-load current IH2)
A
7.7
10.2
13.2
18
26
Maximum current Imax
A
15.4
20.4
27
39
52
Rated power
Based on IL
kW (hp)
4 (5)
5.5 (7.5)
7.5 (10)
11 (10)
15 (15)
Based on IH
kW (hp)
3 (4)
4 (5)
5.5 (7.5)
7.5 (10)
11 (10)
Rated pulse frequency
kHz
4
4
4
4
4
Efficiency ?
%
>97
>97
>97
>97
>97
Power loss 3)
At rated current
kW
0.14
0.184
0.239
0.333
0.385
Cooling air requirement
m3/s (ft3/s)
0.0092 (0.325)
0.0092 (0.325)
0.0092 (0.325)
0.0185 (0.65)
0.0185 (0.65)
Sound pressure level
LpA (1 m)
dB
<62
<62
<62
<65
<65
24 V DC power supply
for Control Unit
A
1
1
1
1
1
Input current 4)
Rated current
A
13.3
17.2
22.2
32.6
39.9
Based on IH
A
11.6
15.3
19.8
27
36
Line supply connection
U1/L1, V1/L2, W1/L3
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Conductor cross-section
mm2
1.5 ... 6
1.5 ... 6
1.5 ... 6
6 ... 16
6 ... 16
Motor connection
U2, V2, W2
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Conductor cross-section
mm2
1.5 ... 6
1.5 ... 6
1.5 ... 6
6 ... 16
6 ... 16
PE connection
Included in terminal connector
Included in terminal connector
Included in terminal connector
Included in terminal connector
Included in terminal connector
Motor cable length, max.
Without filter, shielded/unshielded
m (ft)
150/150 (492/492)
150/150 (492/492)
150/150 (492/492)
150/150 (492/492)
150/150 (492/492)
With integrated filter class A, shielded/unshielded
m (ft)
100/100 (328/328) 5)
100/100 (328/328) 5)
100/100 (328/328) 5)
150/150 (492/492) 5)
150/150 (492/492) 5)
Degree of protection
IP20
IP20
IP20
IP20
IP20
Dimensions
Width
mm (in)
100 (3.94)
100 (3.94)
100 (3.94)
140 (5.51)
140 (5.51)
Height
mm (in)
291 (11.46)
291 (11.46)
291 (11.46)
355 (13.98)
355 (13.98)
Depth
Without operator panel
mm (in)
165 (6.50)
165 (6.50)
165 (6.50)
165 (6.50)
165 (6.50)
With operator panel, max.
mm (in)
248 (9.76)
248 (9.76)
248 (9.76)
248 (9.76)
248 (9.76)
Frame size
FSB
FSB
FSB
FSC
FSC
Weight, approx.
Without integrated line filter
kg (lb)
2.9 (6.39)
2.9 (6.39)
3 (6.62)
4.7 (10.4)
4.8 (10.6)
With integrated line filter
kg (lb)
3.1 (6.84)
3.1 (6.84)
3.2 (7.06)
5.3 (11.7)
5.4 (11.9)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
4) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. The current values are specified on the rating plate of the Power Module.
5) The values apply with low-capacitance CY cables - the max. permissible motor cable length is 50 m (164 ft) (shielded) as standard.
Line voltage 380 ... 480 V 3 AC
PM240?2 Power Modules standard variant
Without integrated line filter
6SL3210-1PE23-8UL0
6SL3210-1PE24-5UL0
6SL3210-1PE26-0UL0
6SL3210-1PE27-5UL0
6SL3210-1PE28-8UL0
6SL3210-1PE31-1UL0
With integrated line filter class A
6SL3210-1PE23-8AL0
6SL3210-1PE24-5AL0
6SL3210-1PE26-0AL0
6SL3210-1PE27-5AL0
6SL3210-1PE28-8AL0
6SL3210-1PE31-1AL0
Output current
at 50 Hz 400 V 3 AC
Rated current Irated 1)
A
38
45
60
75
90
110
Base-load current IL1)
A
38
45
60
75
90
110
Base-load current IH2)
A
32
38
45
60
75
90
Maximum current Imax
A
64
76
90
120
150
180
Rated power
Based on IL
kW (hp)
18.5 (20)
22 (25)
30 (30)
37 (40)
45 (50)
55 (60)
Based on IH
kW (hp)
15 (15)
18.5 (20)
22 (25)
30 (30)
37 (40)
45 (50)
Rated pulse frequency
kHz
4
4
4
4
4
4
Efficiency ?
%
>97
>97
>97
>97
>97
>97
Power loss 3)
At rated current
kW
0.55
0.68
0.76
1.01
1.19
1.54
Cooling air requirement
m3/s (ft3/s)
0.055 (1.9)
0.055 (1.9)
0.055 (1.9)
0.055 (1.9)
0.083 (2.9)
0.083 (2.9)
Sound pressure level
LpA (1 m)
dB
45 ... 65 4)
45 ... 65 4)
45 ... 65 4)
45 ... 65 4)
44 ... 62 4)
44 ... 62 4)
24 V DC power supply
for Control Unit
A
1
1
1
1
1
1
Input current 5)
Rated current
A
36
42
57
70
86
104
Based on IH
A
33
38
47
62
78
94
Line supply connection
U1/L1, V1/L2, W1/L3
Screw-type terminals
Screw-type terminals
Screw-type terminals
Screw-type terminals
Screw-type terminals
Screw-type terminals
Conductor cross-section
mm2
10 ... 35
10 ... 35
10 ... 35
10 ... 35
25 ... 70
25 ... 70
Motor connection
U2, V2, W2
Screw-type terminals
Screw-type terminals
Screw-type terminals
Screw-type terminals
Screw-type terminals
Screw-type terminals
Conductor cross-section
mm2
10 ... 35
10 ... 35
10 ... 35
10 ... 35
25 ... 70
25 ... 70
PE connection
Screw-type terminals
Screw-type terminals
Screw-type terminals
Screw-type terminals
Screw-type terminals
Screw-type terminals
Motor cable length, max.
Shielded
m (ft)
200 (656)
200 (656)
200 (656)
200 (656)
200 (656)
200 (656)
Unshielded
m (ft)
300 (984)
300 (984)
300 (984)
300 (984)
300 (984)
300 (984)
Degree of protection
IP20
IP20
IP20
IP20
IP20
IP20
Dimensions
Width
mm (in)
200 (7.87)
200 (7.87)
200 (7.87)
200 (7.87)
275 (10.83)
275 (10.83)
Height
mm (in)
472 (18.58)
472 (18.58)
472 (18.58)
472 (18.58)
551 (21.69)
551 (21.69)
Depth
Without operator panel
mm (in)
237 (9.33)
237 (9.33)
237 (9.33)
237 (9.33)
237 (9.33)
237 (9.33)
With operator panel, max.
mm (in)
278 (10.9)
278 (10.9)
278 (10.9)
278 (10.9)
278 (10.9)
278 (10.9)
Frame size
FSD
FSD
FSD
FSD
FSE
FSE
Weight, approx.
Without integrated line filter
kg (lb)
16 (35.3)
16 (35.3)
17 (37.5)
17 (37.5)
26 (57.3)
26 (57.3)
With integrated line filter
kg (lb)
17.5 (38.6)
17.5 (38.6)
18.5 (40.8)
18.5 (40.8)
28 (61.7)
28 (61.7)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
4) Values dependent on ambient temperature and utilization.
5) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1%. The current values are specified on the rating plate of the Power Module.
Line voltage 380 ... 480 V 3 AC
PM240?2 Power Modules standard variant
Without integrated line filter
6SL3210-1PE31-5UL0
6SL3210-1PE31-8UL0
6SL3210-1PE32-1UL0
6SL3210-1PE32-5UL0
With integrated line filter class A
6SL3210-1PE31-5AL0
6SL3210-1PE31-8AL0
6SL3210-1PE32-1AL0
6SL3210-1PE32-5AL0
Output current
at 50 Hz 400 V 3 AC
Rated current Irated 1)
A
145
178
205
250
Base-load current IL1)
A
145
178
205
250
Base-load current IH2)
A
110
145
178
205
Maximum current Imax
A
220
290
356
410
Rated power
Based on IL
kW (hp)
75 (75)
90 (100)
110 (100)
132 (125)
Based on IH
kW (hp)
55 (60)
75 (75)
90 (100)
110 (100)
Rated pulse frequency
kHz
4
4
2
2
Efficiency ?
%
>97
>97
>97
>97
Power loss 3)
At rated current
kW
1.78
2.31
2.14
2.81
Cooling air requirement
m3/s (ft3/s)
0.153 (5.4)
0.153 (5.4)
0.153 (5.4)
0.153 (5.4)
Sound pressure level
LpA (1 m)
dB
56 ... 68 4)
56 ... 68 4)
56 ... 68 4)
56 ... 68 4)
24 V DC power supply
for Control Unit
A
1
1
1
1
Input current 5)
Rated current
A
140
172
198
242
Based on IH
A
117
154
189
218
Line supply connection
U1/L1, V1/L2, W1/L3
M10 screw stud
M10 screw stud
M10 screw stud
M10 screw stud
Conductor cross-section
mm2
35 ... 2 ? 120
35 ... 2 ? 120
35 ... 2 ? 120
35 ... 2 ? 120
Motor connection
U2, V2, W2
M10 screw stud
M10 screw stud
M10 screw stud
M10 screw stud
Conductor cross-section
mm2
35 ... 2 ? 120
35 ... 2 ? 120
35 ... 2 ? 120
35 ... 2 ? 120
PE connection
M10 screw stud
M10 screw stud
M10 screw stud
M10 screw stud
Motor cable length, max.
Shielded
m (ft)
300 (984)
300 (984)
300 (984)
300 (984)
Unshielded
m (ft)
450 (1476)
450 (1476)
450 (1476)
450 (1476)
Degree of protection
IP20
IP20
IP20
IP20
Dimensions
Width
mm (in)
305 (12.01)
305 (12.01)
305 (12.01)
305 (12.01)
Height
mm (in)
708 (27.87)
708 (27.87)
708 (27.87)
708 (27.87)
Depth
Without operator panel
mm (in)
357 (14.06)
357 (14.06)
357 (14.06)
357 (14.06)
With operator panel, max.
mm (in)
398 (15.7)
398 (15.7)
398 (15.7)
398 (15.7)
Frame size
FSF
FSF
FSF
FSF
Weight, approx.
Without integrated line filter
kg (lb)
57 (126)
57 (126)
61 (135)
61 (135)
With integrated line filter
kg (lb)
63 (139)
63 (139)
65 (143)
65 (143)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
4) Values dependent on ambient temperature and utilization.
5) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1%. The current values are specified on the rating plate of the Power Module.
Line voltage 500 ... 690 V 3 AC
PM240?2 Power Modules standard variant
Without integrated line filter
6SL3210-1PH21-4UL0
6SL3210-1PH22-0UL0
6SL3210-1PH22-3UL0
6SL3210-1PH22-7UL0
6SL3210-1PH23-5UL0
6SL3210-1PH24-2UL0
With integrated line filter class A
6SL3210-1PH21-4AL0
6SL3210-1PH22-0AL0
6SL3210-1PH22-3AL0
6SL3210-1PH22-7AL0
6SL3210-1PH23-5AL0
6SL3210-1PH24-2AL0
Output current
at 50 Hz 690 V 3 AC
Rated current Irated 1)
A
14
19
23
27
35
42
Base-load current IL1)
A
14
19
23
27
35
42
Base-load current IH2)
A
11
14
19
23
27
35
Maximum current Imax
A
22
29
38
46
54
70
Rated power
Based on IL
kW (hp)
11 (10)
15 (15)
18.5 (20)
22 (25)
30 (30)
37 (40)
Based on IH
kW (hp)
7.5 (10)
11 (10)
15 (15)
18.5 (20)
22 (25)
30 (30)
Rated pulse frequency
kHz
4
4
4
4
4
4
Efficiency ?
%
>98
>98
>98
>98
>98
>98
Power loss 3)
At rated current
kW
0.32
0.41
0.48
0.56
0.72
0.88
Cooling air requirement
m3/s (ft3/s)
0.055 (1.9)
0.055 (1.9)
0.055 (1.9)
0.055 (1.9)
0.055 (1.9)
0.055 (1.9)
Sound pressure level
LpA (1 m)
dB
45 ... 65 4)
45 ... 65 4)
45 ... 65 4)
45 ... 65 4)
45 ... 65 4)
45 ... 65 4)
24 V DC power supply
for Control Unit
A
1
1
1
1
1
1
Input current 5)
Rated current
A
14
18
22
25
33
40
Based on IH
A
11
14
20
24
28
36
Line supply connection
U1/L1, V1/L2, W1/L3
Screw-type terminals
Screw-type terminals
Screw-type terminals
Screw-type terminals
Screw-type terminals
Screw-type terminals
Conductor cross-section
mm2
10 ... 35
10 ... 35
10 ... 35
10 ... 35
10 ... 35
10 ... 35
Motor connection
U2, V2, W2
Screw-type terminals
Screw-type terminals
Screw-type terminals
Screw-type terminals
Screw-type terminals
Screw-type terminals
Conductor cross-section
mm2
10 ... 35
10 ... 35
10 ... 35
10 ... 35
10 ... 35
10 ... 35
PE connection
Screw-type terminals
Screw-type terminals
Screw-type terminals
Screw-type terminals
Screw-type terminals
Screw-type terminals
Motor cable length, max.
Shielded
m (ft)
200 (656)
200 (656)
200 (656)
200 (656)
200 (656)
200 (656)
Unshielded
m (ft)
300 (984)
300 (984)
300 (984)
300 (984)
300 (984)
300 (984)
Degree of protection
IP20
IP20
IP20
IP20
IP20
IP20
Dimensions
Width
mm (in)
200 (7.87)
200 (7.87)
200 (7.87)
200 (7.87)
200 (7.87)
200 (7.87)
Height
mm (in)
472 (18.58)
472 (18.58)
472 (18.58)
472 (18.58)
472 (18.58)
472 (18.58)
Depth
Without operator panel
mm (in)
237 (9.33)
237 (9.33)
237 (9.33)
237 (9.33)
237 (9.33)
237 (9.33)
With operator panel, max.
mm (in)
278 (10.9)
278 (10.9)
278 (10.9)
278 (10.9)
278 (10.9)
278 (10.9)
Frame size
FSD
FSD
FSD
FSD
FSD
FSD
Weight, approx.
Without integrated line filter
kg (lb)
17 (37.5)
17 (37.5)
17 (37.5)
17 (37.5)
17 (37.5)
17 (37.5)
With integrated line filter
kg (lb)
18.5 (40.8)
18.5 (40.8)
18.5 (40.8)
18.5 (40.8)
18.5 (40.8)
18.5 (40.8)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
4) Values dependent on ambient temperature and utilization.
5) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. The current values are specified on the rating plate of the Power Module.
Line voltage 500 ... 690 V 3 AC
PM240?2 Power Modules standard variant
Without integrated line filter
6SL3210-1PH25-2UL0
6SL3210-1PH26-2UL0
6SL3210-1PH28-0UL0
6SL3210-1PH31-0UL0
6SL3210-1PH31-2UL0
6SL3210-1PH31-4UL0
With integrated line filter class A
6SL3210-1PH25-2AL0
6SL3210-1PH26-2AL0
6SL3210-1PH28-0AL0
6SL3210-1PH31-0AL0
6SL3210-1PH31-2AL0
6SL3210-1PH31-4AL0
Output current
at 50 Hz 690 V 3 AC
Rated current Irated 1)
A
52
62
80
100
115
142
Base-load current IL1)
A
52
62
80
100
115
142
Base-load current IH2)
A
42
52
62
80
100
115
Maximum current Imax
A
84
104
124
160
200
230
Rated power
Based on IL
kW (hp)
45 (50)
55 (60)
75 (75)
90 (100)
110 (100)
132 (125)
Based on IH
kW (hp)
37 (40)
45 (50)
55 (60)
75 (75)
90 (100)
110 (100)
Rated pulse frequency
kHz
4
4
4
4
2
2
Efficiency ?
%
>98
>98
>98
>98
>98
>98
Power loss 3)
At rated current
kW
1
1.21
1.22
1.55
1.82
2.33
Cooling air requirement
m3/s (ft3/s)
0.083 (2.9)
0.083 (2.9)
0.153 (5.4)
0.153 (5.4)
0.153 (5.4)
0.153 (5.4)
Sound pressure level
LpA (1 m)
dB
44 ... 62 4)
44 ... 62 4)
56 ... 68 4)
56 ... 68 4)
56 ... 68 4)
56 ... 68 4)
24 V DC power supply
for Control Unit
A
1
1
1
1
1
1
Input current 5)
Rated current
A
50
59
78
97
111
137
Based on IH
A
44
54
66
85
106
122
Line supply connection
U1/L1, V1/L2, W1/L3
Screw-type terminals
Screw-type terminals
M10 screw stud
M10 screw stud
M10 screw stud
M10 screw stud
Conductor cross-section
mm2
25 ... 70
25 ... 70
35 ... 2 ? 120
35 ... 2 ? 120
35 ... 2 ? 120
35 ... 2 ? 120
Motor connection
U2, V2, W2
Screw-type terminals
Screw-type terminals
M10 screw stud
M10 screw stud
M10 screw stud
M10 screw stud
Conductor cross-section
mm2
25 ... 70
25 ... 70
35 ... 2 ? 120
35 ... 2 ? 120
35 ... 2 ? 120
35 ... 2 ? 120
PE connection
Screw-type terminals
Screw-type terminals
M10 screw stud
M10 screw stud
M10 screw stud
M10 screw stud
Motor cable length, max.
Shielded
m (ft)
200 (656)
200 (656)
300 (984)
300 (984)
300 (984)
300 (984)
Unshielded
m (ft)
300 (984)
300 (984)
450 (1476)
450 (1476)
450 (1476)
450 (1476)
Degree of protection
IP20
IP20
IP20
IP20
IP20
IP20
Dimensions
Width
mm (in)
275 (10.83)
275 (10.83)
305 (12.01)
305 (12.01)
305 (12.01)
305 (12.01)
Height
mm (in)
551 (21.69)
551 (21.69)
708 (27.87)
708 (27.87)
708 (27.87)
708 (27.87)
Depth
Without operator panel
mm (in)
237 (9.33)
237 (9.33)
357 (14.06)
357 (14.06)
357 (14.06)
357 (14.06)
With operator panel, max.
mm (in)
278 (10.9)
278 (10.9)
398 (15.7)
398 (15.7)
398 (15.7)
398 (15.7)
Frame size
FSE
FSE
FSF
FSF
FSF
FSF
Weight, approx.
Without integrated line filter
kg (lb)
26 (57.3)
26 (57.3)
60 (132.3)
60 (132.3)
60 (132.3)
60 (132.3)
With integrated line filter
kg (lb)
28 (61.7)
28 (61.7)
64 (141)
64 (141)
64 (141)
64 (141)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
4) Values dependent on ambient temperature and utilization.
5) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. The current values are specified on the rating plate of the Power Module.
PM240?2 Power Modules push-through variant
Line voltage 200 ... 240 V 1 AC/3 AC
PM240?2 Power Modules push-through variant
Without integrated line filter
6SL3211-1PB13-8UL0
6SL3211-1PB21-0UL0
6SL3211-1PB21-8UL0
With integrated line filter class A
6SL3211-1PB13-8AL0
6SL3211-1PB21-0AL0
6SL3211-1PB21-8AL0
Output current
At 50 Hz 230 V 1 AC/3 AC
Rated current Irated 1)
A
4.2
10.4
17.5
Base-load current IL1)
A
4.2
10.4
17.5
Base-load current IH2)
A
3.2
7.4
13.6
Maximum current Imax
A
6.4
15.6
27.2
Rated power
Based on IL
kW (hp)
0.75 (1)
2.2 (3)
4 (5)
Based on IH
kW (hp)
0.55 (0.75)
1.5 (2)
3 (4)
Rated pulse frequency
kHz
4
4
4
Efficiency ?
%
>96
>96
>96
Power loss 3)
At rated current
kW
0.04
0.12
0.18
Cooling air requirement
m3/s (ft3/s)
0.005 (0.18)
0.0092 (0.325)
0.0185 (0.65)
Sound pressure level
LpA (1 m)
dB
<56
<62
<65
24 V DC power supply
for Control Unit
A
1
1
1
Input current 4)
Rated current 1 AC/3 AC
A
9.6/5.5
24/13.9
43/24.8
Based on IH 1 AC/3 AC
A
8.4/4.8
20.9/12.1
37.5/21.7
Line supply connection
U1/L1, V1/L2, W1/L3
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Conductor cross-section
mm2
1.5 ... 2.5
1.5 ... 6
6 ... 16
Motor connection
U2, V2, W2
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Conductor cross-section
mm2
1.5 ... 2.5
1.5 ... 6
6 ... 16
Motor cable length, max.
Shielded
m (ft)
150 (492)
150 (492)
150 (492)
Unshielded
m (ft)
150 (492)
150 (492)
150 (492)
Degree of protection
IP20
IP20
IP20
Dimensions
Width
mm (in)
126 (4.96)
154 (6.06)
200 (7.87)
Height
mm (in)
238 (9.37)
345 (13.58)
411 (16.18)
Depth
Without operator panel
mm (in)
171 (6.73)
171 (6.73)
171 (6.73)
With operator panel, max.
mm (in)
254 (10.00)
254 (10.00)
254 (10.00)
Frame size
FSA
FSB
FSC
Weight, approx.
With integrated line filter
Without integrated line filter
kg (lb)
1.8 (3.97)
3.4 (7.50)
5.8 (12.8)
With integrated line filter
kg (lb)
2 (4.41)
3.7 (8.16)
6.3 (13.9)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1%. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate.
Line voltage 380 ... 480 V 3 AC
PM240?2 Power Modules push-through variant
Without integrated line filter
6SL3211-1PE18-0UL1
6SL3211-1PE21-8UL0
6SL3211-1PE23-3UL0
With integrated line filter class A
6SL3211-1PE18-0AL1
6SL3211-1PE21-8AL0
6SL3211-1PE23-3AL0
Output current
at 50 Hz 400 V 3 AC
Rated current Irated 1)
A
7.7
18
32
Base-load current IL1)
A
7.7
18
32
Base-load current IH2)
A
5.9
13.2
26
Maximum current Imax
A
11.8
27
52
Rated power
Based on IL
kW (hp)
3 (4)
7.5 (10)
15 (15)
Based on IH
kW
2.2 (3)
5.5 (7.5)
11 (10)
Rated pulse frequency
kHz
4
4
4
Efficiency ?
%
>96
>97
>97
Power loss 3)
At rated current
kW
0.113
0.239
0.385
Cooling air requirement
m3/s (ft3/s)
0.007 (0.2)
0.0092 (0.325)
0.0185 (0.65)
Sound pressure level
LpA (1 m)
dB
<56
<62
<65
24 V DC power supply
for Control Unit
A
1
1
1
Input current 4)
Rated current
A
10.1
22.2
39.9
Based on IH
A
8.8
19.8
36
Line supply connection
U1/L1, V1/L2, W1/L3
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Conductor cross-section
mm2
1.5 ... 2.5
1.5 ... 6
6 ... 16
Motor connection
U2, V2, W2
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Screw-type terminals, plug-in
Conductor cross-section
mm2
1.5 ... 2.5
1.5 ... 6
6 ... 16
Motor cable length, max.
Without filter, shielded/unshielded
m (ft)
150/150 (492/492)
150/150 (492/492)
150/150 (492/492)
With integrated filter class A, shielded/unshielded
m (ft)
50/100 (164/328)
100/100 (328/328) 5)
150/150 (492/492) 5)
Degree of protection
IP20
IP20
IP20
Dimensions
Width
mm (in)
126 (4.96)
154 (6.06)
200 (7.87)
Height
mm (in)
238 (9.37)
345 (13.58)
411 (16.18)
Depth
Without operator panel
mm (in)
171 (6.73)
171 (6.73)
171 (6.73)
With operator panel, max.
mm (in)
254 (10.00)
254 (10.00)
254 (10.00)
Frame size
FSA
FSB
FSC
Weight, approx.
With integrated line filter
Without integrated line filter
kg (lb)
1.7 (3.75)
3.6 (7.94)
5.8 (12.8)
With integrated line filter
kg (lb)
1.8 (3.97)
3.9 (8.60)
6.3 (13.9)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1%. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate.
5) The values apply with low-capacitance CY cables - the max. permissible motor cable length is 50 m (164 ft) (shielded) as standard.
PM240 Power Modules
Line voltage 380 ... 480 V 3 AC
PM240 Power Modules
Without integrated line filter
6SL3224-0XE41-3UA0
6SL3224-0XE41-6UA0
6SL3224-0XE42-0UA0
Output current
at 50 Hz 400 V 3 AC
Rated current Irated 1)
A
302
370
477
Base-load current IL1)
A
302
370
477
Base-load current IH2)
A
250
302
370
Maximum current Imax
A
400
483
592
Rated power
Based on IL
kW (hp)
160 (250)
200 (300)
250 (400)
Based on IH
kW (hp)
132 (125)
160 (250)
200 (300)
Rated pulse frequency
kHz
2
2
2
Efficiency ?
%
>98
>98
>98
Power loss 3)
At rated current
kW
4.163
4.783
5.911
Cooling air requirement
m3/s (ft3/s)
0.36 (12.7)
0.36 (12.7)
0.36 (12.7)
Sound pressure level
LpA (1 m)
dB
<69
<69
<69
24 V DC power supply
for Control Unit
A
1
1
1
Rated input current 4)
With line reactor
A
245
297
354
Without line reactor
A
297
354
442
Length of cable to braking resistor, max.
m (ft)
50 (164)
50 (164)
50 (164)
Line supply connection
U1/L1, V1/L2, W1/L3
M10 screw stud
M10 screw stud
M10 screw stud
Conductor cross-section
mm2
2 ? 240
2 ? 240
2 ? 240
Motor connection
U2, V2, W2
M10 screw stud
M10 screw stud
M10 screw stud
Conductor cross-section
mm2
2 ? 240
2 ? 240
2 ? 240
PE connection
On housing with M10 screw
On housing with M10 screw
On housing with M10 screw
Motor cable length 5), max.
Shielded
m (ft)
200 (656)
200 (656)
200 (656)
Unshielded
m (ft)
300 (984)
300 (984)
300 (984)
Degree of protection
IP20
IP20
IP20
Dimensions
Width
mm (in)
326 (12.83)
326 (12.83)
326 (12.83)
Height
mm (in)
1533 (60.35)
1533 (60.35)
1533 (60.35)
Depth
mm (in)
547 (21.54)
547 (21.54)
547 (21.54)
Frame size
FSGX
FSGX
FSGX
Weight, approx.
kg (lb)
174 (384)
174 (384)
174 (384)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
4) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. These current values without line reactor are specified on the rating plate of the Power Module.
5) Max. motor cable length 25 m (82.03 ft) (shielded) for PM240 Power Modules with integrated line filter to maintain the limit values acc.to EN 61800-3 Category C2.
PM250 Power Modules
Line voltage 380 ... 480 V 3 AC
PM250 Power Modules
With integrated line filter
6SL3225-0BE25-5AA1
6SL3225-0BE27-5AA1
6SL3225-0BE31-1AA1
Output current
at 50 Hz 400 V 3 AC
Rated current Irated 1)
A
18
25
32
Base-load current IL1)
A
18
25
32
Base-load current IH2)
A
13.2
19
26
Maximum current Imax
A
26.4
38
52
Rated power
Based on IL
kW (hp)
7.5 (10)
11 (10)
15 (15)
Based on IH
kW (hp)
5.5 (7.5)
7.5 (10)
11 (10)
Rated pulse frequency
kHz
4
4
4
Efficiency ?
%
95
95
95
Power loss 3)
At rated current
kW
0.298
0.488
0.472
Cooling air requirement
m3/s (ft3/s)
0.038 (1.3)
0.038 (1.3)
0.038 (1.3)
Sound pressure level
LpA (1 m)
dB
<60
<60
<60
24 V DC power supply
for Control Unit
A
1
1
1
Input current 4)
Rated current
A
18
25
32
Based on IH
A
13.2
19
26
Line supply connection
U1/L1, V1/L2, W1/L3
Screw-type terminals
Screw-type terminals
Screw-type terminals
Conductor cross-section
mm2
2.5 ... 10
2.5 ... 10
2.5 ... 10
Motor connection
U2, V2, W2
Screw-type terminals
Screw-type terminals
Screw-type terminals
Conductor cross-section
mm2
2.5 ... 10
2.5 ... 10
2.5 ... 10
PE connection
On housing with M5 screw
On housing with M5 screw
On housing with M5 screw
Motor cable length, max.
Shielded
m (ft)
25 (82)
25 (82)
25 (82)
Unshielded
m (ft)
100 (328)
100 (328)
100 (328)
Degree of protection
IP20
IP20
IP20
Dimensions
Width
mm (in)
189 (7.44)
189 (7.44)
189 (7.44)
Height
mm (in)
334 (13.15)
334 (13.15)
334 (13.15)
Depth
Without operator panel
mm (in)
185 (7.28)
185 (7.28)
185 (7.28)
With operator panel, max.
mm (in)
268 (10.55)
268 (10.55)
268 (10.55)
Frame size
FSC
FSC
FSC
Weight, approx.
kg (lb)
7.5 (10)
7.5 (10)
7.5 (10)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate.
Line voltage 380 ... 480 V 3 AC
PM250 Power Modules
Without integrated line filter
6SL3225-0BE31-5UA0
6SL3225-0BE31-8UA0
6SL3225-0BE32-2UA0
With integrated line filter
6SL3225-0BE31-5AA0
6SL3225-0BE31-8AA0
6SL3225-0BE32-2AA0
Output current
at 50 Hz 400 V 3 AC
Rated current Irated 1)
A
38
45
60
Base-load current IL1)
A
38
45
60
Base-load current IH2)
A
32
38
45
Maximum current Imax
A
64
76
90
Rated power
Based on IL
kW (hp)
18.5 (20)
22 (25)
30 (30)
Based on IH
kW (hp)
15 (15)
18.5 (20)
22 (25)
Rated pulse frequency
kHz
4
4
4
Efficiency ?
%
>97
>97
>97
Power loss 3)
At rated current
kW
0.576
0.693
0.918
Cooling air requirement
m3/s (ft3/s)
0.022 (0.8)
0.022 (0.8)
0.039 (1.4)
Sound pressure level
LpA (1 m)
dB
<60
<60
<61
24 V DC power supply
for Control Unit
A
1
1
1
Input current 4)
Rated current
A
36
42
56
Based on IH
A
30
36
42
Line supply connection
U1/L1, V1/L2, W1/L3
M6 screw studs
M6 screw studs
M6 screw studs
Conductor cross-section
mm2
10 ... 35
10 ... 35
10 ... 35
Motor connection
U2, V2, W2
M6 screw studs
M6 screw studs
M6 screw studs
Conductor cross-section
mm2
10 ... 35
10 ... 35
10 ... 35
PE connection
On housing with M6 screw
On housing with M6 screw
On housing with M6 screw
Motor cable length 5), max.
Shielded
m (ft)
50 (164)
50 (164)
50 (164)
Unshielded
m (ft)
100 (328)
100 (328)
100 (328)
Degree of protection
IP20
IP20
IP20
Dimensions
Width
mm (in)
275 (10.83)
275 (10.83)
275 (10.83)
Height
Without integrated line filter
mm (in)
419 (16.50)
419 (16.50)
419 (16.50)
With integrated line filter
mm (in)
512 (20.16)
512 (20.16)
512 (20.16)
Depth
Without operator panel
mm (in)
204 (8.03)
204 (8.03)
204 (8.03)
With operator panel, max.
mm (in)
278 (10.94)
278 (10.94)
278 (10.94)
Frame size
FSD
FSD
FSD
Weight, approx.
Without integrated line filter
kg (lb)
13 (28.7)
13 (28.7)
13 (28.7)
With integrated line filter
kg (lb)
15 (33.1)
15 (33.1)
16 (35.3)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate.
5) Max. motor cable length 25 m (82.03 ft) (shielded) for PM250 Power Modules with integrated line filter to maintain the limit values of EN 61800-3 Category C2.
Line voltage 380 ... 480 V 3 AC
PM250 Power Modules
Without integrated line filter
6SL3225-0BE33-0UA0
6SL3225-0BE33-7UA0
6SL3225-0BE34-5UA0
6SL3225-0BE35-5UA0
6SL3225-0BE37-5UA0
With integrated line filter
6SL3225-0BE33-0AA0
6SL3225-0BE33-7AA0
6SL3225-0BE34-5AA0
6SL3225-0BE35-5AA0
6SL3225-0BE37-5AA0
Output current
at 50 Hz 400 V 3 AC
Rated current Irated 1)
A
75
90
110
145
178
Base-load current IL1)
A
75
90
110
145
178
Base-load current IH2)
A
60
75
90
110
145
Maximum current Imax
A
120
150 (492.15)
180
220
290
Rated power
Based on IL
kW (hp)
37 (40)
45 (50)
55 (60)
75 (75)
90 (100)
Based on IH
kW (hp)
30 (30)
37 (40)
45 (50)
55 (60)
75 (75)
Rated pulse frequency
kHz
4
4
4
4
4
Efficiency ?
%
>97
>97
>97
>97
>97
Power loss 3)
At rated current
kW
1.01
1.217
1.605
2.234
2.638
Cooling air requirement
m3/s (ft3/s)
0.022 (0.8)
0.039 (1.4)
0.094 (3.3)
0.094 (3.3)
0.117 (4.1)
Sound pressure level
LpA (1 m)
dB
<60
<62
<60
<60
<65
24 V DC power supply
for Control Unit
A
1
1
1
1
1
Input current 4)
Rated current
A
70
84
102
135
166
Based on IH
A
56
70
84
102
135
Line supply connection
U1/L1, V1/L2, W1/L3
M6 screw studs
M6 screw studs
M8 screw studs
M8 screw studs
M8 screw studs
Conductor cross-section, max.
mm2
10 ... 50
10 ... 50
25 ... 120
25 ... 120
25 ... 120
Motor connection
U2, V2, W2
M6 screw studs
M6 screw studs
M8 screw studs
M8 screw studs
M8 screw studs
Conductor cross-section, max.
mm2
10 ... 50
10 ... 50
25 ... 120
25 ... 120
25 ... 120
PE connection
On housing with M6 screw
On housing with M6 screw
On housing with M8 screw
On housing with M8 screw
On housing with M8 screw
Motor cable length 5), max.
Shielded
m (ft)
50 (164)
50 (164)
50 (164)
50 (164)
50 (164)
Unshielded
m (ft)
100 (328)
100 (328)
100 (328)
100 (328)
100 (328)
Degree of protection
IP20
IP20
IP20
IP20
IP20
Dimensions
Width
mm (in)
275 (10.83)
275 (10.83)
350 (13.78)
350 (13.78)
350 (13.78)
Height
Without integrated line filter
mm (in)
499 (19.65)
499 (19.65)
634 (24.96)
634 (24.96)
634 (24.96)
With integrated line filter
mm (in)
635 (25.0)
635 (25.0)
934 (36.77)
934 (36.77)
934 (36.77)
Depth
Without operator panel
mm (in)
204 (8.03)
204 (8.03)
316 (12.44)
316 (12.44)
316 (12.44)
With operator panel, max.
mm (in)
278 (10.94)
278 (10.94)
390 (15.35)
390 (15.35)
390 (15.35)
Frame size
FSE
FSE
FSF
FSF
FSF
Weight, approx.
Without integrated line filter
kg (lb)
14 (30.9)
14 (30.9)
35 (77.2)
35 (77.2)
35 (77.2)
With integrated line filter
kg (lb)
21 (46.3)
21 (46.3)
51 (112.5)
51 (112.5)
51 (112.5)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate.
5) Max. motor cable length 25 m (82.03 ft) (shielded) for PM250 Power Modules with integrated line filter to maintain the limit values of EN 61800-3 Category C2.
skener.ru
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Àðìàòóðà DENDOR
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Äàò÷èêè è èçìåðèòåëè
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ðåãóëÿòîðû è ðåãèñòðàòîðû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ïíåâìàòè÷åñêîå îáîðóäîâàíèå
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Êðàíû è Êëàïàíû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Èçìåðèòåëüíûå ïðèáîðû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ñèñòåìû áåñïðîâîäíîãî óïðàâëåíèÿ «óìíûé äîì»
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Áåñêîíòàêòíûå âûêëþ÷àòåëè Êîíå÷íûå âûêëþ÷àòåëè Îïòè÷åñêèå äàò÷èêè Ýíêîäåðû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Óñòàíîâêà óìÿã÷åíèÿ
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Óñòàíîâêà îáåçæåëåçèâàíèÿ
