Power Modules . Характеристика. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Power Modules

| | | | | |

Power Modules

Derating data, PM230 Power Modules

Pulse frequency

Rated power ¹⁾ at 50 Hz 400 V 3 AC		Rated output current in A for a pulse frequency of
kW	hp	4 kHz	6 kHz	8 kHz	10 kHz	12 kHz	14 kHz	16 kHz
0.37	0.5	1.3	1.11	0.91	0.78	0.65	0.59	0.52
0.55	0.75	1.7	1.45	1.19	1.02	0.85	0.77	0.68
0.75	1	2.2	1.87	1.54	1.32	1.1	0.99	0.88
1.1	1.5	3.1	2.64	2.17	1.86	1.55	1.4	1.24
1.5	2	4.1	3.49	2.87	2.46	2.05	1.85	1.64
2.2	3	5.9	5.02	4.13	3.54	2.95	2.66	2.36
3	4	7.7	6.55	5.39	4.62	3.85	3.47	3.08
4	5	10.2	8.67	7.14	6.12	5.1	4.59	4.08
5.5	7.5	13.2	11.22	9.24	7.92	6.6	5.94	5.28
7.5	10	18	15.3	12.6	10.8	9	8.1	7.2
11	15	26	22.1	18.2	15.6	13	11.7	10.4
15	20	32	27.2	22.4	19.2	16	14.4	12.8
18.5	25	38	32.3	26.6	22.8	19	17.1	15.2
22	30	45	38.25	31.5	27	22.5	20.25	18
30	40	60	51	42	36	30	27	24
37	50	75	63.75	52.5	45	37.5	33.75	30
45	60	90	76.5	63	54	45	40.5	36
55	75	110	93.5	77	66	55	49.5	44
75	100	145	123.3	101.5	–	–	–	–

¹⁾ Rated power based on the rated output current I_rated. The rated output current I_rated is based on the duty cycle for low overload (LO).

Ambient temperature

Permissible output current as a function of ambient temperature for low overload (LO) for PM230 Power Modules, frame sizes FSA to FSC

Permissible output current as a function of ambient temperature for low overload (LO) for PM230 Power Modules, frame sizes FSD to FSF

Permissible output current as a function of ambient temperature for high overload (HO) for PM230 Power Modules, frame sizes FSA to FSC

Permissible output current as a function of ambient temperature for high overload (HO) for PM230 Power Modules, frame sizes FSD to FSF

Note:

The operating temperature ranges of the Control Units should be taken into account. The temperature ranges are specified in the section Technical specifications under Control Units.

Installation altitude

Permissible line supplies depending on the installation altitude

Installation altitude up to 2000 m (6562 ft) above sea level
- Connection to every supply system permitted for the inverter
Installation altitudes between 2000 m and 4000 m (6562 ft and 13124 ft) above sea level
- Connection to a TN system with grounded neutral point
- TN systems with grounded line conductor are not permitted
- The TN line system with grounded neutral point can also be supplied using an isolation transformer
- The phase-to-phase voltage does not have to be reduced

Note:

The connected motors, power elements and components must be considered separately.

Permissible output current as a function of the installation altitude for PM230 Power Modules, frame sizes FSA to FSF

System operating voltage

Permissible output current as a function of the line voltage for PM230 Power Modules, frame sizes FSA to FSF

Permissible rated power as a function of the line voltage for PM230 Power Modules, frame sizes FSA to FSF

Derating data, PM240?2 Power Modules

Pulse frequency

Rated power ¹⁾ at 50 Hz 200 V 1 AC/3 AC		Rated output current in A for a pulse frequency of
kW	hp	4 kHz	6 kHz	8 kHz	10 kHz	12 kHz	14 kHz	16 kHz
0.55	0.75	3.2	2.6	2.1	1.8	1.5	1.4	1.2
0.75	1	4.2	3.3	2.7	2.3	2	1.8	1.6
1.1	1.5	6	4.7	3.9	3.3	2.8	2.5	2.2
1.5	2	7.4	6.3	5.2	4.4	3.7	3.3	3
2.2	3	10.4	8.8	7.3	6.2	5.2	4.7	4.2
3	4	13.6	11.6	9.5	8.2	6.8	6.1	5.4
4	5	17.5	14.9	12.3	10.5	8.8	7.9	7
5.5	7.5	22	18.7	15.4	13.2	11	9.9	8.8
7.5	10	28	23.8	19.6	16.8	14	12.6	11.2
11	15	42	35.7	29.4	25.2	21	18.9	16.8
15	20	54	45.9	37.8	32.4	27	24.3	21.6
18.5	25	68	57.8	47.6	40.8	34	30.6	27.2
22	30	80	68	56	48	40	36	32
30	40	104	88.4	72.8	62.4	52	46.8	41.6
37	50	130	110.5	91	–	–	–	–
45	60	154	130.9	107.8	–	–	–	–
55	75	178	151.3	124.6	–	–	–	–

¹⁾ Rated power based on the rated output current I_rated. The rated output current I_rated is based on the duty cycle for low overload (LO).

Rated power ¹⁾ at 50 Hz 400 V 3 AC		Rated output current in A for a pulse frequency of
kW	hp	2 kHz	4 kHz	6 kHz	8 kHz	10 kHz	12 kHz	14 kHz	16 kHz
0.55	0.75	1.7	1.7	1.45	1.19	1.02	0.85	0.77	0.68
0.75	1	2.2	2.2	1.87	1.54	1.32	1.1	0.99	0.88
1.1	1.5	3.1	3.1	2.64	2.17	1.86	1.55	1.4	1.24
1.5	2	4.1	4.1	3.49	2.87	2.46	2.05	1.85	1.64
2.2	3	5.9	5.9	5.02	4.13	3.54	2.95	2.66	2.36
3	4	7.7	7.7	6.55	5.39	4.62	3.85	3.47	3.08
4	5	10.2	10.2	8.7	7.1	6.1	5.1	4.6	4.1
5.5	7.5	13.2	13.2	11.2	9.2	7.9	6.6	5.9	5.3
7.5	10	18	18	15.3	12.6	10.8	9	8.1	7.2
11	15	26	26	22.1	18.2	15.6	13	11.7	10.4
15	20	32	32	27.2	22.4	19.2	16	14.4	12.8
18.5	25	38	38	32.3	26.6	22.8	19	17.1	15.2
22	30	45	45	38.3	31.5	27	22.5	20.3	18
30	40	60	60	51	42	36	30	27	24
37	50	75	75	63.8	52.5	45	37.5	33.8	30
45	60	90	90	76.5	63	54	45	40.5	36
55	75	110	110	93.5	77	66	55	49.5	44
75	100	145	145	123.25	108.75	–	–	–	–
90	125	178	178	151.3	133.5	–	–	–	–
110	150	205	205	–	–	–	–	–	–
132	200	250	250	–	–	–	–	–	–

¹⁾ Rated power based on the rated output current I_rated. The rated output current I_rated is based on the duty cycle for low overload (LO).

Rated power ¹⁾ at 50 Hz 690 V 3 AC		Rated output current in A for a pulse frequency of
kW	hp	2 kHz	4 kHz	6 kHz	8 kHz	10 kHz	12 kHz	14 kHz	16 kHz
11	10	14	8.4	–	–	–	–	–	–
15	15	19	11.4	–	–	–	–	–	–
18.5	20	23	13.8	–	–	–	–	–	–
22	25	27	16.2	–	–	–	–	–	–
30	30	35	21	–	–	–	–	–	–
37	40	42	25.2	–	–	–	–	–	–
45	50	52	31.2	–	–	–	–	–	–
55	60	62	37.2	–	–	–	–	–	–
75	75	80	48	–	–	–	–	–	–
90	100	100	60	–	–	–	–	–	–
110	100	115	69	–	–	–	–	–	–
132	125	142	85.2	–	–	–	–	–	–

¹⁾ Rated power based on the rated output current I_rated. The rated output current I_rated is based on the duty cycle for low overload (LO).

Ambient temperature

Permissible output current as a function of ambient temperature for low overload (LO) for PM240?2 Power Modules, frame sizes FSA to FSC

Permissible output current as a function of ambient temperature for low overload (LO) for PM240?2 Power Modules, frame sizes FSD to FSF

Permissible output current as a function of ambient temperature for high overload (HO) for PM240?2 Power Modules, frame sizes FSA to FSC

Permissible output current as a function of ambient temperature for high overload (HO) for PM240?2 Power Modules, frame sizes FSD to FSF

Note:

The operating temperature ranges of the Control Units should be taken into account. The temperature ranges are specified in the section Technical specifications under Control Units.

Installation altitude

Permissible line supplies depending on the installation altitude

Installation altitude up to 2000 m (6562 ft) above sea level
- Connection to every supply system permitted for the inverter
Installation altitudes between 2000 m and 4000 m (6562 ft and 13124 ft) above sea level
- Connection to a TN system with grounded neutral point
- TN systems with grounded line conductor are not permitted
- The TN line system with grounded neutral point can also be supplied using an isolation transformer
- The phase-to-phase voltage does not have to be reduced

Note:

The connected motors, power elements and components must be considered separately.

Permissible output current as a function of the installation altitude for PM240?2 Power Modules

System operating voltage

The rated output current remains constant over the 380 V to 480 V 3 AC voltage range.

Derating data, PM240 Power Modules

Pulse frequency

Rated power at 400 V 3 AC		Rated output current in A for a pulse frequency of
kW	hp	2 kHz	4 kHz	6 kHz	8 kHz	10 kHz	12 kHz	14 kHz	16 kHz
160	250	302 ¹⁾	250	–	–	–	–	–	–
200	300	370 ¹⁾	302	–	–	–	–	–	–
250	400	477 ¹⁾	370	–	–	–	–	–	–

¹⁾ The pulse frequency can only be switched over from 4 kHz (default) to 2 kHz for the low overload (LO) duty cycle.

Ambient temperature

Reliable output current depending on the ambient temperature for low overload (LO) and for high overload (HO) for PM240 Power Modules, size FSGX

Note:

The operating temperature ranges of the Control Units should be taken into account. The temperature ranges are specified in the section Technical specifications under Control Units.

Installation altitude

Permissible line supplies depending on the installation altitude

Installation altitude up to 2000 m (6562 ft) above sea level
- Connection to every supply system permitted for the inverter
Installation altitudes between 2000 m and 4000 m (6562 ft and 13124 ft) above sea level
- Connection to a TN system with grounded neutral point
- TN systems with grounded line conductor are not permitted
- The TN line system with grounded neutral point can also be supplied using an isolation transformer
- The phase-to-phase voltage does not have to be reduced

Note:

The connected motors, power elements and components must be considered separately.

Permissible output current as a function of the installation altitude for PM240 Power Modules, frame size FSGX

System operating voltage

The rated output current remains constant over the 380 V to 480 V 3 AC voltage range.

Derating data, PM250 Power Modules

Pulse frequency

Rated power at 400 V 3 AC		Rated output current in A for a pulse frequency of
kW	hp	4 kHz	6 kHz	8 kHz	10 kHz	12 kHz	14 kHz	16 kHz
7.5	10	18	12.5	11.9	10.6	9.2	7.9	6.6
11	15	25	18.1	17.1	15.2	13.3	11.4	9.5
15	20	32	24.7	23.4	20.8	18.2	15.6	13
18.5	25	38	32	27	23	19	17	15
22	30	45	38	32	27	23	20	18
30	40	60	51	42	36	30	27	24
37	50	75	64	53	45	38	34	30
45	60	90	77	63	54	45	41	36
55	75	110	94	77	–	–	–	–
75	100	145	123	102	–	–	–	–
90	125	178	151	125	–	–	–	–

Ambient temperature

Permissible output current as a function of ambient temperature for low overload (LO) for PM250 Power Modules, frame sizes FSC to FSF

Permissible output current as a function of ambient temperature for high overload (HO) for PM250 Power Modules, frame sizes FSC to FSF

Note:

The operating temperature ranges of the Control Units should be taken into account. The temperature ranges are specified in the section Technical specifications under Control Units.

Installation altitude

Permissible line supplies depending on the installation altitude

Installation altitude up to 2000 m (6562 ft) above sea level
- Connection to every supply system permitted for the inverter
Installation altitudes between 2000 m and 4000 m (6562 ft and 13124 ft) above sea level
- Connection to a TN system with grounded neutral point
- TN systems with grounded line conductor are not permitted
- The TN line system with grounded neutral point can also be supplied using an isolation transformer
- The phase-to-phase voltage does not have to be reduced

Note:

The connected motors, power elements and components must be considered separately.

Permissible output current as a function of the installation altitude for PM250 Power Modules, frame sizes FSC to FSF

System operating voltage

Permissible output current as a function of the line voltage for PM250 Power Modules, frame sizes FSC to FSF

Permissible rated power as a function of the line voltage for PM250 Power Modules, frame sizes FSC to FSF