SIPLUS ET 200M IM 153-4 PN IO . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS ET 200M IM 153-4 PN IO

| | | | | | |

SIPLUS ET 200M IM 153-4 PN IO

Article number		6AG1153-4AA01-7XB0
		SIPLUS ET200M IM 153-4 PN IO
Supply voltage
Rated value (DC)
? 24 V DC		Yes
permissible range (ripple included), lower limit (DC)		20.4 V
permissible range (ripple included), upper limit (DC)		28.8 V
external protection for power supply lines (recommendation)		In a construction with grounded reference potential, a fuse is necessary for redundant interface modules (Recommendation: 2.5 A)
Mains buffering
? Mains/voltage failure stored energy time		5 ms
Input current
Current consumption, max.		600 mA
Inrush current, typ.		4 A
I?t		0.09 A?·s
Output voltage
Rated value (DC)		5 V
Output current
for backplane bus (5 V DC), max.		1.5 A
Power loss
Power loss, typ.		6 W
Address area
Addressing volume
? Inputs		192 byte
? Outputs		192 byte
Hardware configuration
Number of modules per DP slave interface, max.		12
Protocols
Bus protocol/transmission protocol		PROFINET IO
Interrupts/diagnostics/status information
Diagnostics indication LED
? Connection to network LINK (green)		Yes
? Transmit/receive RX/TX (yellow)		Yes
Isolation
Isolation tested with		500 V DC
Degree and class of protection
Degree of protection acc. to EN 60529
? IP20		Yes
Standards, approvals, certificates
CE mark		Yes
UL approval		Yes; File E239877
FM approval		Yes; CofC 3028431
RCM (formerly C-TICK)		Yes
KC approval		Yes
EAC (formerly Gost-R)		Yes
Ambient conditions
Ambient temperature during operation
? min.		-25 °C; = Tmin
? max.		70 °C; = Tmax; 60 °C @ UL/cUL, ATEX and FM use
Ambient temperature during storage/transportation
? min.		-40 °C
? max.		70 °C
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width		40 mm
Height		125 mm
Depth		118 mm
Weights
Weight, approx.		215 g; approx.