• For connection of ET 200M as IO Device to PROFINET IO (copper, RJ-45)
• 2 versions:
  • IM 153-4 PN STANDARD
  • IM 153-4 PN HIGH FEATURE:
    additionally to the STANDARD version, operation of PROFIsafe F and HART modules
• Integrated 2-port switch
• 12 modules per station
• Usable I/O quantity structure: 192 bytes each
• Active backplane bus for hot swapping of modules optionally available
• Baud rate 10 Mbit/s / 100 Mbit/s (Autonegotiation/Full Duplex)
• I&M functions according to PNO-Guideline Order-No. 3.502, Version V1.1
  

Notes:

Micro Memory Card with min. 64 KB required if not all participants in the network support LLDP (Link Layer Discovery Protocol; neighbor detection).

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.

Technical documentation on SIPLUS can be found here:
http://www.siemens.de/siplus-extreme