SIMATIC WinAC RTX F . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIMATIC WinAC RTX F

| | | | | | | | |

SIMATIC WinAC RTX F

Article number		6ES7671-1RC08-0YA0
		SIMATIC WINAC RTX F 2010
General information
Product type designation		SIMATIC WinAC RTX F 2010
Firmware version		V4.6
Engineering with
? Programming package		STEP 7 V5.5 or higher + S7 Distributed Safety V5.4 SP5 or higher + S7 F Configuration Pack V5.5 SP6 HF1 / iMap V3.0 SP1; STEP 7 in TIA Portal V13 or higher + STEP 7 Safety Advanced V13
Memory
Type of memory		RAM
Work memory
? integrated (for program)		4 Mbyte; Adjustable; depends on Non Paged Memory Pool
? integrated (for data)		4 Mbyte; Adjustable; depends on Non Paged Memory Pool
Load memory
? integrated RAM, max.		Adjustable; depends on Non Paged Memory Pool
CPU processing times
for bit operations, typ.		0.004 µs; Typical
for fixed point arithmetic, typ.		0.003 µs; Typical
for floating point arithmetic, typ.		0.004 µs; Typical
Reference platform		Pentium 4, 2.4 GHz
CPU-blocks
DB
? Number, max.		65 535; Limited only by RAM set for data
? Size, max.		64 kbyte
FB
? Number, max.		65 536; Limited only by RAM set for code
? Size, max.		64 kbyte
FC
? Number, max.		65 536; Limited only by RAM set for code
? Size, max.		64 kbyte
OB
? Size, max.		64 kbyte
Nesting depth
? per priority class		24
? additional within an error OB		24
Counters, timers and their retentivity
S7 counter
? Number		2 048
Retentivity
— adjustable		Yes
— lower limit		0
— upper limit		2 047
— preset		8
Counting range
— can be set		Yes
— lower limit		0
— upper limit		999
IEC counter
? present		Yes
? Type		SFB
? Number		Unlimited (limited only by RAM capacity)
S7 times
? Number		2 048
Retentivity
— adjustable		Yes
— lower limit		0
— upper limit		2 047
— preset		0
Time range
— lower limit		10 ms
— upper limit		9 990 s
IEC timer
? present		Yes
? Type		SFB
? Number		Unlimited (limited only by RAM capacity)
Data areas and their retentivity
Retentivity without UPS and PS Extension Board		128 kbyte with SIMATIC IPC427C and HMI IPC477C; further SIMATIC PCs on request
Retentivity with UPS		all data
Flag
? Number, max.		16 kbyte
? Retentivity preset		MB 0 to MB 15
? Number of clock memories		8
Data blocks
? Retentivity adjustable		Yes; via non-retain property on DB
? Retentivity preset		Yes
Local data
? adjustable, max.		64 kbyte
? preset		32 kbyte
? per priority class, max.		61 440 byte
Address area
I/O address area
? Inputs		16 kbyte
? Outputs		16 kbyte
of which distributed
— DP interface, inputs		16 kbyte
— DP interface, outputs		16 kbyte
— PROFINET interface, inputs		16 kbyte
— PROFINET interface, outputs		16 kbyte
Process image
? Inputs, adjustable		8 kbyte
? Outputs, adjustable		8 kbyte
? Inputs, default		512 byte
? Outputs, default		512 byte
Subprocess images
? Number of subprocess images, max.		15
Digital channels
? Inputs		128 000
? Outputs		128 000
Analog channels
? Inputs		8 000
? Outputs		8 000
Number of operable FMs and CPs (recommended)
? FM		4; FM distributed: FM 350-1, FM 350-2, FM 351, FM 352 / FM 352-5, FM 353, FM 354, FM 355, FM 355-2
? CP, PtP		2; CP 340, CP 341 distributed
? CP, LAN		Over PC CP
Submodules
? Number of submodules, max		4
— of which PROFIBUS, max.		4; Supported interfaces: see 1st and 2nd interface
— of which Industrial Ethernet, max.		1; Supported interfaces: see 3rd and 4th interface
Time of day
Clock
? Hardware clock (real-time)		Yes
? retentive and synchronizable		Yes
Operating hours counter
? Number		8
Clock synchronization
? supported		Yes
? to PC-CP, slave		Yes
? on Ethernet via NTP		Yes
1. Interface
Interface type		CP 5611-A2, CP 5621, integrated PROFIBUS interface of the SIMATIC PC
Physics		RS 485 / PROFIBUS
Isolated		Yes
Number of simultaneously operable CPs, max.		1
Power supply to interface (15 to 30 V DC), max.		does not exist
Functionality
? MPI		No
? PROFIBUS DP master		Yes
? PROFIBUS DP slave		No
DP master
? Number of connections, max.		8
? Transmission rate, max.		12 Mbit/s
? Number of DP slaves, max.		64
Services
— PG/OP communication		Yes
— Global data communication		No
— S7 basic communication		No
— S7 communication		Yes
— S7 communication, as client		Yes
— S7 communication, as server		Yes
— Equidistance		Yes; Only in conjunction with isochronous mode
— Isochronous mode		Yes
— SYNC/FREEZE		Yes
— Activation/deactivation of DP slaves		Yes
— Direct data exchange (slave-to-slave communication)		Yes
— DPV1		Yes
Address area
— Inputs, max.		16 kbyte
— Outputs, max.		16 kbyte
User data per DP slave
— Inputs, max.		244 byte
— Outputs, max.		244 byte
2. Interface
Interface type		CP 5613, CP 5613-A2, CP 5603, CP 5623
Physics		RS 485 / PROFIBUS
Isolated		Yes
Number of simultaneously operable CPs, max.		4
Functionality
? MPI		No
? PROFIBUS DP master		Yes
? PROFIBUS DP slave		No
DP master
? Number of connections, max.		50
? Transmission rate, max.		12 Mbit/s
? Number of DP slaves, max.		125
Services
— PG/OP communication		Yes
— Global data communication		No
— S7 basic communication		No
— S7 communication		Yes
— S7 communication, as client		Yes
— S7 communication, as server		Yes
— Equidistance		Yes; Only in conjunction with isochronous mode
— Isochronous mode		Yes
— SYNC/FREEZE		Yes
— Activation/deactivation of DP slaves		Yes
— Direct data exchange (slave-to-slave communication)		Yes
— DPV1		Yes
Address area
— Inputs, max.		16 kbyte
— Outputs, max.		16 kbyte
User data per DP slave
— Inputs, max.		244 byte
— Outputs, max.		244 byte
3. Interface
Interface type		PROFINET
Physics		Ethernet
Isolated		Yes
Number of simultaneously operable CPs, max.		1; Intel Pro/1000 (Intel 82571EB, 82573L, 82574L, 82541PI; non-shared IRQ required); integrated IE interface SIMATIC PC 4x7B, 6x7B, 8x7B, IPC4x7C, IPC6x7C, IPC8x7C
automatic detection of transmission rate		Yes; 10/100 Mbit/s
Autonegotiation		Yes
Autocrossing		Yes
Interface types
? Number of ports		1
? integrated switch		No
Media redundancy
? supported		No
Functionality
? PROFINET IO Controller		Yes
? PROFINET IO Device		No
? PROFINET CBA		Yes
? Open IE communication		Yes
PROFINET IO Controller
? Transmission rate, max.		100 Mbit/s
Services
— PG/OP communication		Yes
— S7 routing		Yes
— S7 communication		Yes
— Isochronous mode		No
— Open IE communication		Yes
— IRT		No
— Prioritized startup		Yes
— Number of IO devices with prioritized startup, max.		32
— Number of connectable IO Devices, max.		128
— Number of connectable IO Devices for RT, max.		128
— of which in line, max.		128
— Activation/deactivation of IO Devices		Yes
— Number of IO Devices that can be simultaneously activated/deactivated, max.		8
— IO Devices changing during operation (partner ports), supported		Yes
— Device replacement without swap medium		Yes
— Send cycles		1 ms
— Updating time		1 to 512 ms (minimum value depends on communication share set for PROFINET I/O, on the number of I/O devices, and on the volume of configured user data)
Address area
— Inputs, max.		16 kbyte
— Outputs, max.		16 kbyte
— User data per address area, max.		2 kbyte
— User data consistency, max.		254 byte
Open IE communication
? Number of connections, max.		32
? Local port numbers used at the system end		0, 20, 21, 23, 25, 80, 102, 135, 161, 8080, 34962, 34963, 34964, 65532, 65533, 65534, 65535
? Keep-alive function, supported		Yes
4. Interface
Interface type		PROFINET
Physics		Ethernet
Isolated		Yes
Number of simultaneously operable CPs, max.		1; CP 1616 (HW release 8 or above), CP 1604 (HW release 7 or higher), integrated PROFINET interface of SIMATIC PC and S7-mEC
automatic detection of transmission rate		Yes; 10/100 Mbit/s
Autonegotiation		Yes
Autocrossing		Yes
Change of IP address at runtime, supported		Yes
Interface types
? Number of ports		3
? integrated switch		Yes
Media redundancy
? supported		Yes
? Switchover time on line break, typ.		200 ms
? Number of stations in the ring, max.		50
Functionality
? PROFINET IO Controller		Yes
? PROFINET IO Device		No
? PROFINET CBA		Yes
? Open IE communication		Yes
PROFINET IO Controller
? Transmission rate, max.		100 Mbit/s
Services
— PG/OP communication		Yes
— S7 routing		Yes
— S7 communication		Yes
— Isochronous mode		Yes
— Open IE communication		Yes
— IRT		Yes
— Prioritized startup		Yes
— Number of IO devices with prioritized startup, max.		32
— Number of connectable IO Devices, max.		256
— Of which IO devices with IRT, max.		64
— of which in line, max.		64
— Number of IO Devices with IRT and the option "high flexibility"		64
— of which in line, max.		32
— Number of connectable IO Devices for RT, max.		256
— of which in line, max.		256
— Activation/deactivation of IO Devices		Yes
— Number of IO Devices that can be simultaneously activated/deactivated, max.		8
— IO Devices changing during operation (partner ports), supported		Yes
— Device replacement without swap medium		Yes
— Send cycles		250 µs, 500 µs, 1 ms
— Updating time		0.25...512 depending on the send cycle
Address area
— User data per address area, max.		2 kbyte
— User data consistency, max.		254 byte
Open IE communication
? Number of connections, max.		32
? Local port numbers used at the system end		0, 20, 21, 25, 80, 102, 135, 161, 34962, 34963, 34964, 65532, 65533, 65534, 65535
Isochronous mode
Isochronous operation (application synchronized up to terminal)		Yes
Number of DP masters with isochronous mode		2
User data per isochronous slave, max.		128 byte
Equidistance		Yes
shortest clock pulse		2.2 ms; 2.2 ms without partial process image; 2.2 ms with partial process image
Communication functions
PG/OP communication		Yes
Data record routing		Yes; only with CP 5611 or integrated PROFIBUS interface of the SIMATIC PC
Global data communication
? supported		No
S7 basic communication
? supported		No
S7 communication
? supported		Yes
? as server		Yes
? as client		Yes
? User data per job, max.		64 kbyte; Depends on which block is used: BSEND/USEND or PUT/GET
Open IE communication
? TCP/IP		Yes
— Number of connections, max.		32
— Data length for connection type 01H, max.		Not supported
— Data length for connection type 11H, max.		65 534 byte
— Data length, max.		65 534 byte
? ISO-on-TCP (RFC1006)		Yes
— Number of connections, max.		32
— Data length, max.		65 534 byte
? UDP		Yes
— Number of connections, max.		32
— Data length, max.		1 472 byte
Web server
? supported		Yes
? Number of HTTP clients		2
? User-defined websites		No
PROFINET CBA (at set setpoint communication load)
? Setpoint for the CPU communication load		20 %
? Number of remote interconnection partners		64
? Number of functions, master/slave		30
? Total of all master/slave connections		1 000
? Data length of all incoming connections master/slave, max.		6 800 byte
? Data length of all outgoing connections master/slave, max.		6 800 byte
? Number of device-internal and PROFIBUS interconnections		500
? Data length of device-internal und PROFIBUS interconnections, max.		4 000 byte
? Data length per connection, max.		1 400 byte
Remote interconnections with acyclic transmission
— Sampling frequency: Sampling time, min.		500 ms
— Number of incoming interconnections		100
— Number of outgoing interconnections		100
— Data length of all incoming interconnections, max.		2 000 byte
— Data length of all outgoing interconnections, max.		2 000 byte
— Data length per connection, max.		1 400 byte
Remote interconnections with cyclic transmission
— Transmission frequency: Transmission interval, min.		10 ms
— Number of incoming interconnections		200
— Number of outgoing interconnections		200
— Data length of all incoming interconnections, max.		4 800 byte
— Data length of all outgoing interconnections, max.		4 800 byte
— Data length per connection, max.		250 byte
HMI variables via PROFINET (acyclic)
— Number of stations that can log on for HMI variables (PN OPC/iMap)		3
— HMI variable updating		500 ms
— Number of HMI variables		200
— Data length of all HMI variables, max.		2 000 byte
PROFIBUS proxy functionality
— supported		Yes
— Number of linked PROFIBUS devices		16
— Data length per connection, max.		240 byte; Slave-dependent
Number of connections
? overall		96
S7 message functions
Number of login stations for message functions, max.		62
SCAN procedure		No
Process diagnostic messages		Yes; ALARM_S, ALARM_SQ, ALARM_D, ALARM_DQ
simultaneously active Alarm-S blocks, max.		20; of a total of 20 for all SFCs
Alarm 8-blocks		Yes
? Number of instances for alarm 8 and S7 communication blocks, max.		4 000
Process control messages		No
Test commissioning functions
Status block		Yes
Single step		Yes
Number of breakpoints		20
Status/control
? Status/control variable		Yes
Forcing
? Forcing		No
Diagnostic buffer
? present		Yes
? Number of entries, max.
— adjustable		Yes
— preset		120
Hardware requirement
Hardware required		PC with color monitor, keyboard, mouse or pointing device for Windows
Processor
? Processor		Intel Celeron M 900 MHz or compatible (older PC systems with Programmable Interrupt Controllers (PIC) are not suitable for WinAC RTX F 2010.)
— Multi-processor system		No
— Hyper-threading		Yes
Lifetime of module
? Main memory, min.		1 Gbyte
? Required memory on hard disk		100 Mbyte
Operating systems
pre-installed operating system
? Windows NT 4.0		No
? Windows 2000		No
? Windows Vista		No
? Windows XP		Yes; Professional, SP2 and SP3
? Windows XP Embedded		Yes; With the delivery image of the SIMATIC PC
— supported HAL types under Windows XP		ACPI uniprocessor PC, ACPI multiprocessor PC, MPS multiprocessor PC
? Windows 7		Yes; Professional, Enterprise, Ultimate (only 32 bits)
? Windows Embedded Standard 7		No
Configuration
Programming
? Nesting levels		8
Programming language
— LAD		Yes
— FBD		Yes
— STL		Yes
— SCL		Yes
— CFC		Yes
— GRAPH		Yes
— HiGraph®		Yes
Software libraries
— Easy Motion Control		Yes
Know-how protection
? User program protection/password protection		Yes
? Block encryption		No
Open Development interfaces
? CCX (Custom Code Extension)		Yes; WinAC ODK V4.2 or higher
? CMI (Controller Management Interface)		Yes; WinAC ODK V4.2 or higher
? SMX (Shared Memory Extension)		Yes; WinAC ODK V4.2 or higher
— Inputs		4 kbyte
— Outputs		4 kbyte
Weights
Weight, approx.		100 g; With packaging

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания