Climatic conditions

Ambient temperature

0 ... 35 °C

• With heater in sheet-steel cabinet

Min. -5 °C

• With heating in GRP cabinet

Min. -15 °C

• With air-conditioning

Max. 52 ?

Relative humidity

70%, non-condensing

Corrosive atmosphere

No

Gas inlet conditions

Max. sample gas pressure at inlet to sample preparation system

500 hPa (mbar)

Max. moisture content in sample gas

17 vol.% ¹⁾

Max. water dew point

60 ?

Min. sample gas pressure at inlet to sample preparation system

180 °C

Dust content at inlet to sample preparation system

Dust-free

Sampling probe

Sampling tube 20 x 1.5,
1 000 mm long, stainless steel,
flange: DN 65, PN 6

Max. sample gas pressure at sampling probe

500 hPa (mbar)

Max. sample gas temperature at sampling probe

600 °C

Max. dust content at sampling probe

2 g/Nm?

Sample gas must not be flammable or explosive.

Power supply

Supply 1

115 V AC (-15%, +10%)

Supply 2

230 V AC (-15%, +10%)

Supply 3

400 V AC (-15%, +10%)

Connections

Hose material

Teflon

Cables

Not armored, not halogen-free

Electrical design

According to IEC

Cable ID

Individual core labeling as option

Fusing of electronic consumers

1-pole; 2-pole as option

Duplication of analog signals

• Not electrically isolated as option
• Electrically isolated as option

Installation

Site

• In sheet-steel cabinet/frame

Indoor installation

• In GRP cabinet

Outdoor installation

Ex zone

Non-Ex area

System design

Version

Mounting frame or cabinet

Cabinet degree of protection

IP54

Automatic calibration

Yes, with ULTRAMAT 23

Dimensions (without plinth)

Depth of sheet-steel frame

• 800 mm (without plinth)

2 000 x 800 x 800 mm (H x W x D)

• 600 mm (without plinth)

2 000 x 800 x 600 mm (H x W x D)

GRP cabinet (with plinth)

2 080 x 900 x 600 mm (H x W x D)