IM 174 PROFIBUS module . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на IM 174 PROFIBUS module

| | | | | | |

IM 174 PROFIBUS module

Article number		6ES7174-0AA10-0AA0
		IM 174 FOR CONNECTING ANALOG DRIVES
Supply voltage
Rated value (DC)
? 24 V DC		Yes
Input current
Current consumption, max.		500 mA
from backplane bus 5 V DC, max.		100 mA
Encoder supply
5 V encoder supply
? 5 V		Yes
? Output current, max.		1.2 A
? Cable length, max.		25 m
24 V encoder supply
? 24 V		Yes
? Output current, max.		1.4 A
? Cable length, max.		100 m
Absolute encoder (SSI) encoder supply
? Absolute encoder (SSI)		Yes
? short-circuit protection		Yes
Power loss
Power loss, typ.		12 W
Digital inputs
Number of digital inputs		10
Input voltage
? for signal "0"		-3 to +5V
? for signal "1"		+11 to +30V
Input current
? for signal "0", max. (permissible quiescent current)		2 mA
? for signal "1", typ.		8 mA
Input delay (for rated value of input voltage)
for standard inputs
— at "0" to "1", min.		15 µs
Cable length
? shielded, max.		100 m
Digital outputs
Number of digital outputs		8
Short-circuit protection		Yes
Switching capacity of the outputs
? with resistive load, max.		1 A
? on lamp load, max.		30 W
Output voltage
? Rated value (DC)		24 V; L+
? for signal "1", min.		L+ (-3 V)
? for signal "1", max.		3 V
Output current
? for signal "1" permissible range for 0 to 55 °C, min.		5 mA
? for signal "1" permissible range for 0 to 55 °C, max.		300 mA
? for signal "0" residual current, max.		0.4 mA
Output delay with resistive load
? "0" to "1", max.		500 µs
Switching frequency
? with resistive load, max.		500 Hz
? with inductive load, max.		0.5 Hz
Relay outputs
? Number of relay outputs		4
? Number of operating cycles, max.		50 000
Switching capacity of contacts
— with resistive load, max.		1 A
Cable length
? shielded, max.		600 m
Analog outputs
Number of analog outputs		4
Output ranges, voltage
? -10 V to +10 V		Yes
Analog value generation for the outputs
Integration and conversion time/resolution per channel
? Resolution with overrange (bit including sign), max.		15 bit
Encoder
Number of connectable encoders, max.		4
Connectable encoders
? Incremental encoder (symmetrical)		Yes
? Absolute encoder (SSI)		Yes
? 2-wire sensor		Yes
— permissible quiescent current (2-wire sensor), max.		2 mA
Encoder signals, incremental encoder (symmetrical)
? Trace mark signals		A, notA, B, notB
? Zero mark signal		N, notN
? Input signal		5 V difference signal (phys. RS 422)
? Input frequency, max.		1 MHz
? Cable length, shielded, max.		35 m; 35 m at max. 500 kHz; 10 m at max. 1 MHz
Encoder signals, absolute encoder (SSI)
? Input signal		5 V difference signal (phys. RS 422)
? Data signal		DATA, notDATA
? Clock signal		CL, notCL
? Telegram length, parameterizable		13, 21, 24 bit
? Clock frequency, max.		1.5 MHz; 187.5 KHz 1.5 MHz (parameterizable)
? Binary code		Yes
? Gray code		Yes
? Cable length, shielded, max.		250 m; 250 m at 187.5 kHz, 10 m at 1.5 MHz
Isochronous mode
Isochronous operation (application synchronized up to terminal)		Yes
shortest clock pulse		1.5 ms
Interrupts/diagnostics/status information
Alarms
? Diagnostic alarm		Yes
Drive interface
Number of drive interfaces		4
Analog drive
Setpoint signal
— Short-circuit proof		Yes; max. 45 mA, min. 3.3 kOhm load impedance
— Rated voltage range		-10.5 V to +10.5 V
— Output current		-3 to +3 mA
Output controller enable
— Number of relay contacts		4
— Switching voltage, max.		30 V
— Switching current, max.		1 A
— Switching capacity, max.		30 V·A
— Number of switching cycles, min.		50 000; at 30 V DC, 1 A
— Cable length, shielded, max.		35 m
Stepper drive
? Differential output voltage, min.		2 V; R = 100 Ohm
? Differential output voltage for signal "0", max.		1 V; For I = -20 mA
? Differential output voltage for signal "1", min.		3.7 V; 3.7 V at I = -20 mA; 4.5 V at I = -100 µA,
? Load resistance, min.		55 ?
? Output current, max.		60 mA
? Pulse frequency		750 kHz
? Cable length, shielded, max.		50 m; in hybrid operation with analog axes 35 m, in asymmetrical transmission 10 m
Potential separation
Potential separation digital inputs
? Potential separation digital inputs		Yes; to encoders, analog outputs, DP interface; no to other DI/DOs
Potential separation digital outputs
? Potential separation digital outputs		Yes; to encoders, analog outputs, DP interface; no to other DI/DOs
Connection method
required front connector		40-pin
Dimensions
Width		160 mm
Height		125 mm
Depth		118 mm
Weights
Weight, approx.		1 kg

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания