MAG 5100 W . Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на MAG 5100 W

| | | | | | | | |

MAG 5100 W

Product characteristic	MAG 5100 W (7ME6520) Mainly for the European market	MAG 5100 W (7ME6580) Mainly for the non-European market
	EPDM or NBR lining	Ebonite lining
Design and nominal size	Coned sensor (octagon liner): DN 15 ... 40 (?" … 1?")
	Coned sensor: DN 50 … 300 (2" … 12")	Full bore sensor: DN 25 … 2 000 (1" … 78")
	Full bore sensor: DN 350 … 1200 (14" … 48")
Measuring principle	Electromagnetic induction	Electromagnetic induction
Excitation frequency (Mains supply: 50/60 Hz)	DN 15 … 65 (?" … 2?"): 12.5 Hz/15 Hz	DN 25 … 65 (1" … 2?"): 12.5 Hz/15 Hz
	DN 80 … 150 (3" … 6"): 6.25 Hz/7.5 Hz	DN 80 … 150 (3" … 6"): 6.25 Hz/7.5 Hz
	DN 200 … 300 (8" … 12"): 3.125 Hz/3.75 Hz	DN 200 … 1200 (8" … 48"): 3.125 Hz/3.75 Hz
	DN 350 … 1200 (14" … 48"):1.5625 Hz/1.875 Hz	DN 1400 … 2000 (54" … 78"):1.5625 Hz/1.875 Hz
Process connection
Flanges¹⁾
EN 1092-1	PN 10 (145 psi): DN 200 … 300 (8" … 12") Flat face	Raised face³⁾ (EN 1092-1, DIN 2501 and BS 4504 have the same mating dimensions)
	PN 10 (145 psi): DN 350 … 1200 (14" … 48") Raised face²⁾	PN 6 (87 psi): DN 1400 … 2000 (54" … 78")
	PN 16 (232 psi): DN 50 … 300 (2" … 12") Flat face³⁾	PN 10 (145 psi): DN 200 … 2000 (8" … 78")
	PN 16 (232 psi): DN 350 … 1200 (14" … 48") Raised face	PN 16 (232 psi): DN 65 … 600 (2?" … 24")
	PN 40 (580 psi): DN 15 … 40 (?" … 1?") Flat face	PN 40 (580 psi): DN 25 … 50 (1" … 2")
ANSI B16.5	Class 150: ?" ... 12" Flat face; 14" ... 24" raised face	Class 150: 1" … 24"; Raised face
AWWA C-207	Class D: 28" … 48", Flat face	Class D: 28" … 78", Flat face
AS4087	PN 16 (232 psi): DN 15 ... DN 300 (2" ... 12") Flat Face; DN 350 … DN 1200 (14" … 48") Raised face	PN 16 (232 psi): DN 50 ... DN 1200 (2" ... 48") Raised face
JIS B 2220:2004	-	K10 (1" … 24")
Rated Operation conditions
Ambient temperature
Sensor	-40 … +70 °C (-40 … +158 °F)	-20 … +70 °C (-4 … +158 °F)
Compact with transmitter MAG 5000/6000 ⁴⁾	-20 … +60 °C (-4 … +140 °F)	-20 … +60 °C (-4 … +140 °F)
Operating pressure (Abs) [abs. bar] (Maximum operating pressure depending on flange standard, decreases with increasing operating temperature)	DN 15 … 40 (?" … 1?"): 0.01 … 40 bar (0.15 … 580 psi)	DN 25 … 50 (1" … 2"): 0.01 … 40 bar (0.15 … 580 psi)
	DN 50 … 300 (2" … 12"): 0.03 … 20 bar (0.44 … 290 psi)	DN 65 … 1200 (2?" … 48"): 0.01 … 16 bar (0.15 … 232 psi)
	DN 350 … 1200 (14" … 48"): 0.01 … 16 bar (0.15 … 232 psi)	DN 1400 … 2000 (54" … 78"): 0.01 … 10 bar (0.15 … 145 psi)
Enclosure rating
Standard	IP67 to EN 60529/NEMA 4X/6 (1 mH₂O for 30 min)	IP67 to EN 60529/NEMA 4X/6 (1 mH₂O for 30 min)
Option	IP68 to EN 60529/NEMA 6P (10 mH₂O continuously)	IP68 to EN 60529/NEMA 6P (10 mH₂O continuously)
Pressure drop	DN 15 and 25 (?" and 1"): Max. 20 mbar (0.29 psi) at 1 m/s (3 ft/s)	Insignificant
	DN 40 … 300 (1?" … 12"): Max. 25 mbar (0.36 psi) at 3 m/s (10 ft/s)
	DN 350 … 1200 (14" … 48"): Insignificant
Test pressure	1.5 x PN (where applicable) FM Fire Service: 2 x PN	1.5 x PN (where applicable)
Mechanical load (vibration)	18 … 1000 Hz random in x, y, z, directions for 2 hours according to EN 60068-2-36	18 … 1000 Hz random in x, y, z, directions for 2 hours according to EN 60068-2-36
	Sensor: 3.17 g RMS	Sensor: 3.17 g RMS
	Sensor with compact MAG 5000/6000 mounted transmitter: 3.17 g RMS	Sensor with compact MAG 5000/6000 mounted transmitter: 3.17 g RMS
	Sensor with compact MAG 6000 I mounted transmitter: 1.14 g RMS	Sensor with compact MAG 6000 I mounted transmitter: 1.14 g RMS
Medium conditions
Temperature of medium
NBR	-10 … +70 °C (14 … 158 °F)	-
EPDM	-10 … +70 °C (14 … 158 °F)	-
EPDM (MI-001)	0.1 … 30 °C (32 … 76 °F)	-
Ebonite	-	-10 … +70 °C (14 … 158 °F)
EMC	2014/30/EU	2014/30/EU
Design
Material
Housing and flanges	Carbon steel ASTM A 105, with corrosion-resistant coating Corrosivity category C4M, according to ISO 12944-2	Carbon steel ASTM A 105, with corrosion-resistant coating Corrosivity category C4M, according to ISO 12944-2
Electrode	Hastelloy C276	Hastelloy C276
Grounding electrode	Hastelloy C276	Hastelloy C276
Terminal box	Fibre glass reinforced polyamide	Fibre glass reinforced polyamide
Certificates and approvals
Calibration
Standard production calibration	Zero-point, 2 x 25 % and 2 x 90 %	Zero-point, 2 x 25 % and 2 x 90 %
Special calibration	5-point calibration: 20 %, 40 %, 60 %, 80 %, 100 % of factory Q_max 10-point calibration: ascending and descending at 20 %, 40 %, 60 %, 80 %, 100 % of factory Q_max Matched pair calibration: default, 5-point or 10-point	5-point calibration: 20 %, 40 %, 60 %, 80 %, 100 % of factory Q_max 10-point calibration: ascending and descending at 20 %, 40 %, 50 %, 80 %, 100 % of factory Q_max Matched pair calibration: default, 5-point or 10-point
Custody transfer	MI-001 cold water (EU): DN 50 ... DN 1200 (2" ... 48") Kiwa water approval (NL): DN 50 ...DN 1200 (2" ... 48") Chilled water pattern approval PTB K 7.2 DN 50 ... DN 300 (Germany)⁵⁾	-
Drinking water	EPDM liner: WRAS (WRc, BS690 cold water, GB) NSF/ANSI Standard 61⁶⁾ (Cold water, US) ACS listed (F) DVGW W270 (D) Belgaqua (B) MCERTS (GB environmental)	WRAS (WRc, BS690 cold water, GB) NSF/ANSI Standard 61⁶⁾ (Cold water, US)
Marine⁷⁾	American Bureau of Shipping (ABS) Bureau Veritas Det Norske Veritas (DNV) Germanischer Lloyd (GL) Lloyd's Register of Shipping
Hazardous areas⁷⁾
Standard sensor with/without MAG 5000/6000/6000 I	FM NI Class I Div. 2 Groups A, B, C, D NI Class I Zone 2 Groups IIC	FM NI Class I Div. 2 Groups A, B, C, D NI Class I Zone 2 Groups IIC
Pressure equipment	PED conforming: All EN1092-1 flanges and ANSI Class 150 (< DN 300 /<12") – 2014/68/EU⁹⁾ CRN	PED conforming: All EN1092-1 flanges (< DN 600 /<24") – 2014/68/EU⁹⁾ CRN
Others	EAC (Russia, Belarus, Kazakhstan) KCC (South Korea) FM Fire Service Approval acc. to class 1044⁸⁾ VdS: Extinguishing systems DN 50 ... 300	EAC (Russia, Belarus, Kazakhstan) CMC/CPA (China)

¹⁾ DN 750, DN 1050 and DN 1100 (30", 42" and 44") not available with EN 1092-1 (PN 10 and PN 16) and AS4087 flanges

²⁾ Type 01 (SORF)

³⁾ DN ? 600 type 01 (SORF); DN > 600 type 11 (WNRF)

⁴⁾ Compact with transmitter MAG 5000 CT/6000 CT -20 ... +50 °C (-4 ... 122 °F)

⁵⁾ For verification submit Product Variation Request

⁶⁾ Including Annex G

⁷⁾ In remote version with sensor size DN 50 ... DN 300 (2" ... 12")

⁸⁾ For sizes larger than 600 mm (24") in PN 16 PED conformity is available as a cost-added option. The basic unit will only carry the LVD (Low Voltage Directive) and EMC approval. All products sold outside of EU and EFTA are excluded from the directive, also products sold into certain market sectors are excluded. These include:

a) Meters used in networks for the supply, distribution and discharge of water.

b) Meters used in pipelines for the conveyance of any fluid from offshore to onshore.

c) Meters used in the extraction of petroleum or gas, including Christmas tree and manifold equipment.

d) Any meter mounted on a ship or mobile offshore platform. For further information on the PED standard and requirements see page 9/6.

⁹⁾ Not for sensors with 300 ?m coating.

MAG 5100 W (7ME6520) with MAG 6000 CT (Revenue program) MI-001

MAG 5100 W CT program is type approved according to international water meter standard OIML R 49. Since the first November 2006 the MI-001 water meter directive is in force, which means that all water meters can be sold across the EU borders if the water meters contain a MI-001 label.

The MAG 5100 W MI-001 verified and labeled products are a Class II approval according to Directive 2014/32/EU of the European Parliament and Council of 26 February, 2014 on measuring instruments, Annex III Water meters (MI-001) in the sizes from DN 50 to DN 1200 (Article No. 7ME6520).

The MID certification is obtained as a modul B + D module approval according to the above mentioned directive.

Module B: Type approval according to OIML R 49

Module D: Quality insurance approval of production

MAG 5100 W (7ME6520) with MAG 5000/MAG 6000 or MAG 6000 CT for Fire Service applications

MAG 5100 W (7ME6520) is FM Fire Service approved for automatic fire protection systems. The approval is applicable for the sizes DN 50, DN 80, DN 100, DN 150, DN 200, DN 250 and DN 300 (2", 3", 4", 6", 8", 10" and 12") with ANSI B16.5 Class 150 flanges. The FM Fire Service approved product can be ordered via the Z-options P20, P21 and P22.

MAG 5100 W (7ME6520) MI-001 verified and labeled products at a given Q3 and Q3/Q4 = 1.25 and Q2/Q1 = 1.6 measuring ranges see table below:

Order code: P11	DN 50 (2”)	DN 65 (2?”)	DN 80 (3”)	DN 100 (4”)	DN 125 (5”)	DN 150 (6”)	DN 200 (8”)	DN 250 (10”)	DN 300 (12”)
“R” Q3/Q1	40	40	40	40	40	40	40	40	40
Q4 [m?/h]	20	31.25	50	78.75	125	200	312.5	500	787.5
Q3 [m?/h]	16	25	40	63	100	160	250	400	630
Q2 [m?/h]	0.64	1.0	1.6	2.52	4.0	6.4	10.0	16.0	25.2
Q1 [m?/h]	0.4	0.63	1.0	1.58	2.5	4.0	6.25	10.0	15.75

Order code: P12	DN 50 (2”)	DN 65 (2?”)	DN 80 (3”)	DN 100 (4”)	DN 125 (5”)	DN 150 (6”)	DN 200 (8”)	DN 250 (10”)	DN 300 (12”)
“R” Q3/Q1	63	63	63	63	63	63	63	63	63
Q4 [m?/h]	20	31.25	50	78.75	125	200	312.5	500	787.5
Q3 [m?/h]	16	25	40	63	100	160	250	400	630
Q2 [m?/h]	0.41	0.63	1.02	1.6	2.5	4.1	6.3	10.2	16.0
Q1 [m?/h]	0.25	0.40	0.63	1.00	1.59	2.54	3.97	6.35	10.0

Order code: P13	DN 50 (2”)	DN 65 (2?”)	DN 80 (3”)	DN 100 (4”)	DN 125 (5”)	DN 150 (6”)	DN 200 (8”)	DN 250 (10”)	DN 300 (12”)
“R” Q3/Q1	80	80	80	80	80	80	80	80	80
Q4 [m?/h]	20	31.3	50	78.75	125	200	312.5	500	787.5
Q3 [m?/h]	16	25	40	63	100	160	250	400	630
Q2 [m?/h]	0.32	0.5	0.8	1.26	2.0	3.2	5.0	8.0	12,6
Q1 [m?/h]	0.20	0.31	0.50	0.79	1.25	2.00	3.13	5.00	7.9

Order code: P16	DN 50 (2”)	DN 65 (2?”)	DN 80 (3”)	DN 100 (4”)	DN 125 (5”)	DN 150 (6”)	DN 200 (8”)	DN 250 (10”)	DN 300 (12”)
“R” Q3/Q1	160	160	160	160	160	160	160	160	160
Q4 [m?/h]	50	78.5	125	200	312.5	500	787.5	1250	2000
Q3 [m?/h]	40	63	100	160	250	400	630	1000	1600
Q2 [m?/h]	0.4	0.63	1.0	1.6	2.5	4.0	6.3	10.0	16.0
Q1 [m?/h]	0.25	0.39	0.63	1.0	1.56	2.5	3.94	6.3	10.0

Order code: P17	DN 50 (2”)	DN 65 (2?”)	DN 80 (3”)	DN 100 (4”)	DN 125 (5”)	DN 150 (6”)	DN 200 (8”)	DN 250 (10”)	DN 300 (12”)
“R” Q3/Q1	200	200	200	200	200	200	200	200	200
Q4 [m?/h]	50	78.75	125	200	312.5	500	787.5	1250	2000
Q3 [m?/h]	40	63	100	160	250	400	630	1000	1600
Q2 [m?/h]	0.32	0.50	0.80	1.28	2.0	3.2	5.0	8.0	12.8
Q1 [m?/h]	0.2	0.32	0.5	0.8	1.25	2.0	3.15	5.0	8.0

Order code: P18	DN 50 (2”)	DN 65 (2?”)	DN 80 (3”)	DN 100 (4”)	DN 125 (5”)	DN 150 (6”)	DN 200 (8”)	DN 250 (10”)	DN 300 (12”)
“R” Q3/Q1	250	250	250	250	250	250	250	250	250
Q4 [m?/h]	50	78.75	125	200	313	500	787.5	1250	2000
Q3 [m?/h]	40	63	100	160	250	400	630	1000	1600
Q2 [m?/h]	0.26	0.4	0.64	1.02	1.6	2.56	4.0	6.4	10.2
Q1 [m?/h]	0.16	0.25	0.4	0.64	1.0	1.6	2.52	4.0	6.4

Order code: P19	DN 50 (2”)	DN 65 (2?”)	DN 80 (3”)	DN 100 (4”)	DN 125 (5”)	DN 150 (6”)	DN 200 (8”)	DN 250 (10”)	DN 300 (12”)
“R” Q3/Q1	400	400	400	400	400	400	400	400	400
Q4 [m?/h]	50	78.75	125	200	312.5	500	787.5	1250	2000
Q3 [m?/h]	40	63	100	160	250	400	630	1000	1600
Q2 [m?/h]	0.16	0.25	0.4	0.64	1.0	1.6	2.52	4.0	6.4
Q1 [m?/h]	0.1	0.16	0.25	0.4	0.63	1.0	1.58	2.5	4.0

Order code: P24	DN 350 (14")	DN 400 (16“)	DN 450 (18“)	DN 500 (20“)	DN 600 (24“)
“R” Q3/Q1	40	40	40	40	40
Q4 [m?/h]	1250	1250	2000	2000	3125
Q3 [m?/h]	1000	1000	1600	1600	2500
Q2 [m?/h]	40.0	40.0	64.0	64.0	100.0
Q1 [m?/h]	25.0	25.0	40.0	40.0	62.5

Order code: P25	DN 350 (14")	DN 400 (16“)	DN 450 (18“)	DN 500 (20“)	DN 600 (24“)
“R” Q3/Q1	63	63	63	63	63
Q4 [m?/h]	1250	2000	3125	3125	5000
Q3 [m?/h]	1000	1600	2500	2500	4000
Q2 [m?/h]	25.4	40.0	63.49	63.49	101.6
Q1 [m?/h]	15.9	25.4	39.7	39.7	63.49

Order code: P26	DN 350 (14")	DN 400 (16“)	DN 450 (18“)	DN 500 (20“)	DN 600 (24“)
“R” Q3/Q1	80	80	80	80	80
Q4 [m?/h]	2000	3125	5000	5000	7875
Q3 [m?/h]	1600	2500	4000	4000	6300
Q2 [m?/h]	32.0	50.0	80.0	80.0	126.0
Q1 [m?/h]	20.0	31.25	50.0	50.0	78.75

Order code: P27	DN 350 (14")	DN 400 (16“)	DN 450 (18“)	DN 500 (20“)	DN 600 (24“)
“R” Q3/Q1	160	160	160	160	160
Q4 [m?/h]	3125	5000	7875	7875	7875
Q3 [m?/h]	2500	4000	6300	6300	6300
Q2 [m?/h]	25.0	2540.0	63.0	63.0	63.0
Q1 [m?/h]	15.63	25.0	39.38	39.38	39.38

Order code: P29	DN 700 (28“)	DN 750 (30“)	DN 800 (32“)	DN 900 (36“)	DN 1000 (40“)	DN 1200 (48“)
“R” Q3/Q1	40	40	40	40	40	40
Q4 [m?/h]	5000	5000	5000	7875	7875	7875
Q3 [m?/h]	4000	4000	4000	6300	6300	6300
Q2 [m?/h]	160.0	160.0	160.0	252.0	252.0	252.0
Q1 [m?/h]	100.0	100.0	100.0	157.5	157.5	157.5

Order code: P30	DN 700 (28“)	DN 750 (30“)	DN 800 (32“)	DN 900 (36“)	DN 1000 (40“)	DN 1200 (48“)
“R” Q3/Q1	63	63	63	63	63	-
Q4 [m?/h]	5000	5000	5000	7875	7875	-
Q3 [m?/h]	4000	4000	4000	6300	6300	-
Q2 [m?/h]	101.6	101.6	101.6	160.0	160.0	-
Q1 [m?/h]	63.5	63.5	63.5	100.0	100.0	-

Order code: P31	DN 700 (28“)	DN 750 (30“)	DN 800 (32“)	DN 900 (36“)	DN 1000 (40“)	DN 1200 (48“)
“R” Q3/Q1	80	80	80	80	80	-
Q4 [m?/h]	5000	5000	5000	7875	7875	-
Q3 [m?/h]	4000	4000	4000	6300	6300	-
Q2 [m?/h]	80.0	80.0	80.0	126.0	126.0	-
Q1 [m?/h]	50.0	50.0	50.0	78.75	78.75	-

The label is placed on the transmitter housing. An example of the product label is shown below:

OIML R 49/MI-001 approvals valid for:

DN 50 to 300 mm (2” to 12”)
Horizontal installation
Compact or remote with max. 500 m cable
Power supply 115 to 230 V AC, 12 to 24 V AC/DC
With or without communication module

Other restrictions may apply (see certificate)

Special OIML / MI-001 settings:

Unit: m?
Qmax: Q3
Low flow cut-off: 0.1 %
Digital output: Frequency

For other factory settings, see Operating Instructions.

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания