Active Line Modules . Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Active Line Modules

| | | | | |

Active Line Modules

General technical specifications

Electrical specifications
Line power factor
Basic fundamental (cos ?₁)	1.0 (factory setting) can be altered by entering a reactive current setpoint
Total (?)	1.0 (factory setting)
Efficiency	> 97.5 % (including AIM)
DC link voltage	The DC link voltage is regulated and can be adjusted as a voltage decoupled from the line voltage. Factory setting for DC link voltage: 1.5 ? line voltage
Radio interference suppression, standard	Category C3 according to EN 61800-3 (with Active Interface Module)
Conformity	CE (EMC Directive No. 2004/108/EC and Low-Voltage Directive No. 2006/95/EC)
Approvals, according to	cULus (only for drive units connected to line voltages 380 ... 480 V 3 AC and 500 ... 600 V 3 AC)

Line voltage 380 … 480 V 3 AC		Active Line Modules
		6SL3330-7TE32-1AA3	6SL3330-7TE32-6AA3	6SL3330-7TE33-8AA3	6SL3330-7TE35-0AA3	6SL3330-7TE36-1AA3
Rated power
For I_N DC (50 Hz 400 V)	kW	132	160	235	300	380
For I_H DC.(50 Hz 400 V)	kW	115	145	210	270	335
For I_N DC (60 Hz 460 V)	hp	200	250	400	500	600
For I_H DC (60 Hz 460 V)	hp	150	200	300	400	500
DC link current
Rated current I_N DC	A	235	291	425	549	678
Base load current I_H DC¹⁾	A	209	259	378	489	603
Maximum current I_max DC	A	352	436	637	823	1017
Infeed/regenerative feedback current
Rated current I_N E	A	210	260	380	490	605
Maximum current I_max E	A	315	390	570	735	907
Current demand
24 V DC auxiliary power supply	A	1.1	1.1	1.35	1.35	1.4
400 V AC	A	0.63	1.13	1.8	1.8	3.6
DC link capacitance
Active Line Module	?F	4200	5200	7800	9600	12600
Drive line-up, max.	?F	41600	41600	76800	76800	134400
Power loss, max. ²⁾
At 50 Hz 400 V	kW	2.2	2.7	3.9	4.8	6.2
At 60 Hz 460 V	kW	2.3	2.9	4.2	5.1	6.6
Cooling air requirement	m³/s	0.17	0.23	0.36	0.36	0.78
Sound pressure level L_pA³⁾ (1 m) at 50/60 Hz	dB	64/67	64/67	69/73	69/73	70/73
Line supply connection U1, V1, W1		M10 screw	M10 screw	M10 screw	M10 screw	2 ? M12 screw
Conductor cross-section, max. (IEC)	mm²	2 ? 185	2 ? 185	2 ? 240	2 ? 240	4 ? 240
DC link connection DCP, DCN		M10 screw	M10 screw	M10 screw	M10 screw	4 ? hole for M12
Conductor cross-section, max. (IEC)	mm²	2 ? 185	2 ? 185	2 ? 240	2 ? 240	Busbar
PE1/GND connection		M10 screw	M10 screw	M10 screw	M10 screw	M12 screw
Conductor cross-section, max. (IEC)	mm²	2 ? 185	2 ? 185	2 ? 240	2 ? 240	240
PE2/GND connection		M10 screw	M10 screw	M10 screw	M10 screw	2 ? M12 screw
Conductor cross-section, max. (IEC)	mm²	2 ? 185	2 ? 185	2 ? 240	2 ? 240	2 ? 240
Cable length, max. ⁴⁾
Shielded	m	2700	2700	2700	2700	3900
Unshielded	m	4050	4050	4050	4050	5850
Degree of protection		IP20	IP20	IP20	IP20	IP00
Dimensions
Width	mm	326	326	326	326	503
Height	mm	1400	1400	1533	1533	1475
Depth	mm	356	356	545	545	540
Weight, approx.	kg	95	95	136	136	290
Frame size		FX	FX	GX	GX	HX

¹⁾ The base load current I_{H DC} is the basis for a duty cycle of 150 % for 60 s or I_{max DC} for 5 s with a duty cycle duration of 300 s.

²⁾ The specified power loss represents the maximum value at 100 % utilization. The value is lower under normal operating conditions.

³⁾ Total sound pressure level of Active Interface Module and Active Line Module.

⁴⁾ Sum of all motor cables and DC link. Longer cable lengths for specific configurations are available on request. For additional information, please refer to the SINAMICS Low Voltage Engineering Manual.

Line voltage 380 … 480 V 3 AC		Active Line Modules
		6SL3330-7TE37-5AA3	6SL3330-7TE38-4AA3	6SL3330-7TE41-0AA3	6SL3330-7TE41-2AA3	6SL3330-7TE41-4AA3
Rated power
For I_N DC (50 Hz 400 V)	kW	450	500	630	800	900
For I_H DC.(50 Hz 400 V)	kW	400	465	545	690	780
For I_N DC (60 Hz 460 V)	hp	600	700	900	1000	1250
For I_H DC (60 Hz 460 V)	hp	600	700	800	900	1000
DC link current
Rated current I_N DC	A	835	940	1103	1412	1574
Base load current I_H DC¹⁾	A	700	837	982	1255	1401
Maximum current I_max DC	A	1252	1410	1654	2120	2361
Infeed/regenerative feedback current
Rated current I_N E	A	745	840	985	1260	1405
Maximum current I_max E	A	1117	1260	1477	1890	2107
Current demand
24 V DC auxiliary power supply	A	1.4	1.4	1.5	1.7	1.7
400 V AC	A	3.6	3.6	5.4	5.4	5.4
DC link capacitance
Active Line Module	?F	15600	16800	18900	26100	28800
Drive line-up, max.	?F	134400	134400	230400	230400	230400
Power loss, max. ²⁾
At 50 Hz 400 V	kW	7.3	7.7	10.1	12.1	13.3
At 60 Hz 460 V	kW	7.7	8.2	10.8	13	14.2
Cooling air requirement	m³/s	0.78	0.78	1.08	1.08	1.08
Sound pressure level L_pA ³⁾ (1 m) at 50/60 Hz	dB	70/73	70/73	71/73	71/73	71/73
Line supply connection U1, V1, W1		2 ? M12 screw	2 ? M12 screw	3 ? M12 screw	3 ? M12 screw	3 ? M12 screw
Conductor cross-section, max. (IEC)	mm²	4 ? 240	4 ? 240	6 ? 240	6 ? 240	6 ? 240
DC link connection DCP, DCN		4 ? hole for M12	4 ? hole for M12	4 ? hole for M12	4 ? hole for M12	4 ? hole for M12
Conductor cross-section, max. (IEC)	mm²	Busbar	Busbar	Busbar	Busbar	Busbar
PE1/GND connection		M12 screw	M12 screw	M12 screw	M12 screw	M12 screw
Conductor cross-section, max. (IEC)	mm²	240	240	240	240	240
PE2/GND connection		2 ? M12 screw	2 ? M12 screw	3 ? M12 screw	3 ? M12 screw	3 ? M12 screw
Conductor cross-section, max. (IEC)	mm²	2 ? 240	2 ? 240	3 ? 240	3 ? 240	3 ? 240
Cable length, max. ⁴⁾
Shielded	m	3900	3900	3900	3900	3900
Unshielded	m	5850	5850	5850	5850	5850
Degree of protection		IP00	IP00	IP00	IP00	IP00
Dimensions
Width	mm	503	503	704	704	704
Height	mm	1475	1475	1480	1480	1480
Depth	mm	540	540	550	550	550
Weight, approx.	kg	290	290	450	450	450
Frame size		HX	HX	JX	JX	JX

¹⁾ he base load current I_{H DC} is the basis for a duty cycle of 150 % for 60 s or I_{max DC} for 5 s with a duty cycle duration of 300 s.

²⁾ The specified power loss represents the maximum value at 100 % utilization. The value is lower under normal operating conditions.

³⁾ Total sound pressure level of Active Interface Module and Active Line Module.

Line voltage 500 … 690 V 3 AC		Active Line Modules
		6SL3330-7TG35-8AA3	6SL3330-7TG37-4AA3	6SL3330-7TG41-0AA3	6SL3330-7TG41-3AA3
Rated power
For I_N DC (50 Hz 690 V)	kW	560	800	1100	1400
For I_H DC (50 Hz 690 V)	kW	550	705	980	1215
For I_N DC (50 Hz 500 V)	kW	435	560	780	965
For I_H DC (50 Hz 500 V)	kW	400	510	710	880
For I_N DC (60 Hz 575 V)	hp	600	900	1250	1500
For I_H DC (60 Hz 575 V)	hp	450	600	1000	1250
DC link current
Rated current I_N DC	A	644	823	1148	1422
Base load current I_H DC¹⁾	A	573	732	1022	1266
Maximum current I_max DC	A	966	1234	1722	2133
Infeed/regenerative feedback current
Rated current I_N E	A	575	735	1025	1270
Maximum current I_max E	A	862	1102	1537	1905
Current demand
24 V DC auxiliary power supply	A	1.4	1.5	1.7	1.7
500 V AC	A	3.0	4.4	4.4	4.4
690 V AC	A	2.1	3.1	3.1	3.1
DC link capacitance
Active Line Module	?F	7400	11100	14400	19200
Drive line-up, max.	?F	59200	153600	153600	153600
Power loss, max. ²⁾
At 50 Hz 690 V	kW	6.8	10.2	13.6	16.5
At 60 Hz 575 V	kW	6.2	9.6	12.9	15.3
Cooling air requirement	m³/s	0.78	1.08	1.08	1.08
Sound pressure level L_pA ³⁾ (1 m) at 50/60 Hz	dB	70/73	71/73	71/73	71/73
Line supply connection U1, V1, W1		2 ? M12 screw	3 ? M12 screw	3 ? M12 screw	3 ? M12 screw
Conductor cross-section, max. (IEC)	mm²	4 ? 240	6 ? 240	6 ? 240	6 ? 240
DC link connection DCP, DCN		4 ? hole for M12	4 ? hole for M12	4 ? hole for M12	4 ? hole for M12
Conductor cross-section, max. (IEC)	mm²	Busbar	Busbar	Busbar	Busbar
PE1/GND connection		M12 screw	M12 screw	M12 screw	M12 screw
Conductor cross-section, max. (IEC)	mm²	240	240	240	240
PE2/GND connection		2 ? M12 screw	3 ? M12 screw	3 ? M12 screw	3 ? M12 screw
Conductor cross-section, max. (IEC)	mm²	2 x 240	3 x 240	3 x 240	3 x 240
Cable length, max. ⁴⁾
Shielded	m	2250	2250	2250	2250
Unshielded	m	3375	3375	3375	3375
Degree of protection		IP00	IP00	IP00	IP00
Dimensions
Width	mm	503	704	704	704
Height	mm	1475	1480	1480	1480
Depth	mm	540	550	550	550
Weight, approx.	kg	290	450	450	450
Frame size		HX	JX	JX	JX

¹⁾ The base load current I_{H DC} is the basis for a duty cycle of 150 % for 60 s or I_{max DC} for 5 s with a duty cycle duration of 300 s.

²⁾ The specified power loss represents the maximum value at 100 % utilization. The value is lower under normal operating conditions.

³⁾ Total sound pressure level of Active Interface Module and Active Line Module.

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания