PM230 Power Modules, degree of protection IP55/UL Type 12

Principle dimension drawing and drill pattern for PM230 Power Modules, degree of protection IP55/UL Type 12 with integrated line filter class A/B

¹⁾ Increased depth:

• When the IOP is plugged on, the depth increases by 17 mm (0.67 in)

• When the BOP?2/blanking cover is plugged on, the depth increases by 7 mm (0.28 in)

²⁾ Up to 40 °C (104 °F) without any lateral clearance.

PM230 Power Modules, degree of protection IP20, Standard variant

Principle dimension drawing and drill pattern for PM230 Power Modules, degree of protection IP20, Standard variant, with/without integrated line filter class A

¹⁾ Increased depth:

• When the CU230P-2 Control Unit is plugged on, the depth increases by 58 mm (2.28 in) for FSA to FSC and by 49 mm (1.93 in) for FSD to FSF

• When the IOP is plugged on, the depth increases by a further 22 mm (0.87 in)

• When the BOP?2 is plugged on, the depth increases by a further 12 mm (0.47 in)

²⁾The Power Modules can be mounted side by side. A side clearance of 1 mm (0.04 in) is recommended for tolerance-related reasons.

PM230 Power Modules, degree of protection IP20, Push Through variant

Principle dimension drawing and drill pattern for PM230 Power Modules, degree of protection IP20, Push Through variant, with/without integrated line filter class A

¹⁾ Overall depth, of which 117.7 mm (4.63 in) is inside and 53.1 mm (2.09 in) is outside the control cabinet.

Increased depth:

• When the CU230P?2 Control Unit is plugged on, the depth increases by 58 mm (2.28 in)

• When the IOP is plugged on, the depth increases by a further 22 mm (0.87 in)

• When the BOP?2 is plugged on, the depth increases by a further 12 mm (0.47 in)

²⁾The Power Modules can be mounted side by side (mounting frame to mounting frame). A side clearance of 1 mm (0.04 in) is recommended for tolerance-related reasons.