Smart Line Modules in booksize format feature the following connections and interfaces as standard:
1 power connection via screw-type terminals
1 connection for the 24 V DC electronics power supply via the24 V terminal adapter included in the scope of supply
1 DC link connection via integrated DC link busbars
2 PE (protective earth) connections
2 digital inputs (only on 5 kW and 10 kW Smart Line Modules)
1 digital output (only on 5 kW and 10 kW Smart Line Modules)
3 DRIVE?CLiQ sockets (only on 16 kW, 36 kW and 55 kW Smart Line Modules)
The status of the Smart Line Modules is indicated via two multi-color LEDs.
The signal cable shield can be connected to the Line Module by means of a shield connection terminal, e.g. Weidmuller type KLBU 3?8 SC.
The scope of supply of the Smart Line Modules includes:
DRIVE?CLiQ cable for connection to the adjacent Control Unit on the left for drive control, length 0.11 m (4.33 in) (on 16 kW, 36 kW and 55 kW Smart Line Modules only)
2 blanking plugs for sealing unused DRIVE?CLiQ sockets (on 16 kW, 36 kW and 55 kW Smart Line Modules only)
DRIVE?CLiQ cable (length depends on module width) to connect Smart Line Module to adjacent Motor Module, length = width of Smart Line Module + 0.11 m (4.33 in)
Jumper for connecting the 24 V DC busbar to the adjacent Motor Module
24 V terminal adapter (X24)
Connector X21 for digital inputs and outputs
Connector X22 for digital inputs and outputs (on 5 kW and 10 kW Smart Line Modules only)
Connector X1 for line supply connection (on 5 kW and 10 kW Smart Line Modules only)
1 set of warning signs in 30 languages
1 heat conducting foil (for Smart Line Modules with cold plate cooling only)
