Smart Line Modules in booksize format feature the following connections and interfaces as standard:

• 1 power connection via screw-type terminals
• 1 connection for the 24 V DC electronics power supply via the24 V terminal adapter included in the scope of supply
• 1 DC link connection via integrated DC link busbars
• 2 PE (protective earth) connections
• 2 digital inputs
  (only on 5 kW and 10 kW Smart Line Modules)
• 1 digital output
  (only on 5 kW and 10 kW Smart Line Modules)
• 3 DRIVE?CLiQ sockets
  (only on 16 kW, 36 kW and 55 kW Smart Line Modules)

The status of the Smart Line Modules is indicated via two multi-color LEDs.

The signal cable shield can be connected to the Line Module by means of a shield connection terminal, e.g. Weidmuller type KLBU 3?8 SC.

The scope of supply of the Smart Line Modules includes:

• DRIVE?CLiQ cable for connection to the adjacent Control Unit on the left for drive control, length 0.11 m (4.33 in)
  (on 16 kW, 36 kW and 55 kW Smart Line Modules only)
• 2 blanking plugs for sealing unused DRIVE?CLiQ sockets
  (on 16 kW, 36 kW and 55 kW Smart Line Modules only)
• DRIVE?CLiQ cable (length depends on module width) to connect Smart Line Module to adjacent Motor Module, length = width of Smart Line Module + 0.11 m (4.33 in)
• Jumper for connecting the 24 V DC busbar to the adjacent Motor Module
• 24 V terminal adapter (X24)
• Connector X21 for digital inputs and outputs
• Connector X22 for digital inputs and outputs
  (on 5 kW and 10 kW Smart Line Modules only)
• Connector X1 for line supply connection
  (on 5 kW and 10 kW Smart Line Modules only)
• 1 set of warning signs in 30 languages
• 1 heat conducting foil
  (for Smart Line Modules with cold plate cooling only)