SIPLUS S7-400 interface modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS S7-400 interface modules

| |

SIPLUS S7-400 interface modules

Order number		6AG1964-2AA04-7AB0
		SIPLUS S7-400 IF964-DP
Input current
from CPU, max.		150 mA; Current consumption from S7-400 bus: The module uses no current at 24 V, it provides this voltage only at the DP interface. Total current consumption of the components connected to the DP interface, but maximum 150 mA. Current carrying capacity of the isolated 5 V (P5ext) maximum 90 mA, current carrying capacity of the 24 V maximum 150 mA.
Power loss
Power loss, typ.		1 W
Interfaces
PROFIBUS DP
Cable length
— Cable length, max.		1 200 m; At 9.6 kbit/s: max. 1200 m; at 12 Mbit/s: max. 100 m
1. Interface
Physics		RS 485
Isolated		Yes
Functionality
? DP master		Yes; Default setting
? DP slave		Yes
DP master
? Transmission rate, min.		9.6 kbit/s
? Transmission rate, max.		12 Mbit/s
? Number of DP slaves, max.		125; depending on the CPU used
Services
— PG/OP communication		Yes
— Equidistance mode support		Yes
— SYNC/FREEZE		Yes
— Direct data exchange (slave-to-slave communication)		Yes
Address area
— Inputs, max.		device-dependent
— Outputs, max.		device-dependent
User data per DP slave
— Inputs, max.		244 byte
— Outputs, max.		244 byte
Communication functions
Number of connections
? overall		device-dependent
Ambient conditions
Ambient temperature during operation
? min.		-25 °C; = Tmin
? max.		70 °C; = Tmax; @ 60°C for UL/ATEX/FM use
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3		Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width		26 mm
Height		54 mm
Depth		130 mm
Weights
Weight, approx.		65 g