The CANopen bus can be configured via any commercially available CANopen configuration tool. The HMS company provides corresponding "Anybus Configuration Manager CANopen" software together with the product. The configuration is saved directly in the module by means of a point-to-point connection via a USB to CAN adapter. Routing via PROFIBUS/PROFINET is not possible.

Function blocks are available for operation with SIMATIC and can be downloaded by the user from the Internet site specified below.

The module is also available in a SIPLUS version for use in extreme conditions as encountered e.g. on vehicles used outdoors. This version is also only available from HMS.

For further information, please contact HMS directly:

http://www.hms-networks.com/can-for-et200s

There you will also find the manual, the HSP, a link to the GSD files as well as the function blocks for SIMATIC.

Ordering and Support

Please note that ordering and support for the module are exclusively carried out via HMS. Please contact HMS directly should you have any questions concerning this module. The relevant contact details can be found on the Internet at

 http://www.hms-networks.com/can-for-et200s

Exemption from liability/Use of hyperlinks

Siemens has prepared this description with great care. It is not possible, however, for Siemens to verify that the data supplied by external companies is complete, correct or up to date. The possibility that individual items of information might be incorrect, incomplete, or not up-to-date cannot therefore be ruled out. Unless compulsory by law, Siemens accepts no liability for the usability of the data or of the product for the user per se.

This contribution includes addresses of third-party Web sites. Siemens is not responsible for the contents of these Web sites, nor does Siemens adopt these Web sites and their contents, as Siemens does not control the information presented therein and cannot be held responsible for the content and information they contain. You therefore use these links at your own risk.